Homemade Lathe Machine

Рет қаралды 29,986,154

4 жыл бұрын

Let's Learn Something: Project no.23
Good day :)
Finally Guys after a lot of work I will now show to you my best homemade lathe machine and I'm happy with the result I can now make more cool project using this new tools.
Also check my friend's homemade lathe machine.
• DIY Metal Lathe Machin...
(Product used in this video)
125mm Lathe Chuck Self Centering: ban.ggood.vip/SEG3 15% OFF code: BGMP004
16mm Linear Bearing Block: ban.ggood.vip/SEGa
700mm Ball Screw: ban.ggood.vip/SEGd 12% OFF code: BGBS12off
400mm Ball Screw: ban.ggood.vip/SEIQ 12% OFF code: BGBS12off
750mm Linear Rail Shaft Rod with 4pcs Bearing Block: ban.ggood.vip/SEGo 20% OFF code: BGMP001
Carbide Inserts: ban.ggood.vip/SEGD
Knurling Knurler Tool Set 0.5-2mm Pitch: ban.ggood.vip/SEGT 40% OFF code: BG7Tools
Measure Scale Ruler:ban.ggood.vip/SEGW
online shopping on bangood: ban.ggood.vip/V4Cs
download banggood APP to get $20 off new user benifit
banggood support COD free shipping on $19.99
• Playlist for all videos: • DIY/ HOMEMADE IDEA
Other Projects that you will like
• DIY 49cc Scooter using angle grinder
www.youtube.com/watch?v=TIXJp...
• MAKING ON/OFF WELDING MAGNET
• MAKING ON/OFF WELDING ...
• Making Stainless Pipe Bender Part 1
www.youtube.com/watch?v=iEpMQ...
• DIY Pipe Bender using bicycle hub
• DIY || Pipe Bender usi...
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
HERE: • I turn Car Compressor ...
#BESTHOMEMADELATHEMACHINE
#HOMEMADELATHEMACHINE
#MAKING LATHE MACHINE
Don't forget to SUBSCRIBE.

Пікірлер: 6 300

@letslearnsomething30 2 жыл бұрын

Hi Guys, You can check my Second Channel and help me reach 1000 subscribers. Thank you and stay safe. kzfaq.info/get/bejne/b8eShs59v5yqmaM.html

@Wedson_oficial 2 жыл бұрын

Hi how can you tell me the measurements and send me the project so I can try to do it ??

@Wedson_oficial 2 жыл бұрын

Please

@vietnguyenkubota 2 жыл бұрын

Sáng tạo hay

@Toantony191 2 жыл бұрын

quá huyệt vời luôn

@nageswararaokoorma805 2 жыл бұрын

Good done' I like it

@jimsvideos7201 4 жыл бұрын

Ok let's review the facts: 1. It no-kidding works. 2. He made it himself with fairly modest tools, no computers or DRO or CNC anything 3. No mis-drilled holes or anything else 4. It's as good or more likely better than $500 worth of Chinese import 7x12, in size and performance 5. The video itself is to a high standard; well lit, well focused, very well edited. All in all, credit to this man for making it happen.

@AntiYouTuberCom 4 жыл бұрын

*I do not argue what he did well. But the fact is that he bought a ready-made designer who needed a foundation. Have you seen how some people assemble a lathe completely from scratch and make it yourself until the last bolt? That's exactly what I call a real master. So I abstain, not like not dislike.*

@Vodichka9 4 жыл бұрын

@@AntiKZfaqrCom If you mean ready-made design-the linear ways, for example, he is exactly correct to buy these "off-the-shelf", as there is no way to fabricate these with the very primitive tools he has at hand. Making every piece by hand is impossible How would you build ways by hand without a lot of sophisticated tools, HUGE heat-treat furnace, long surface grinder like Okamoto etc, etc,? Making bolts from scratch is the work of a fool. I don't think you understand what this guy accomplished. Pedantichnyy...

@DannyAllen10271966 4 жыл бұрын

@@AntiKZfaqrCom why can't you give him credit where credit is due! I will be damn if I would make some of the stuff he used when I can buy it ready made ....

@teropiispala2576 4 жыл бұрын

@@Vodichka9 actually those can be built by hand with relatively simple tools. It needs lots of work and very flat reference surface like lapped granite. The technique is called scraping and it produce very straight surface. The idea is to use indicator color and scrape off high spots untill the surface is totally flat. I don't mean i suggest that method for home made tools, but that's how prescision tools were made in old days and some still use it when restoring old tools. Using linear bearings is interesting idea and for sure the lathe is very smooth to use. I'm not sure how long they last because sometimes vibrations can be nasty. I wouldn't at least make too deep holes. What comes to precision, there is always some machinist who is not satisfied for hobbyist's tools. In many case it is enough to have a rotating piece tightly in a chuck and moving mechanism to hold the toolbit. It is much better than any other tool to make so many things.

@BlackPanther11286 4 жыл бұрын

Awesome welding technic ❤️🙏🙏

@RicoLen1 3 жыл бұрын

Kid, you have got IT. My dad was a machinist for 45 years, and put me and my 4 siblings through private school. Granted he worked 16 hour days for a few years, but he did it. I grew up in the 80s watching him work on a lathe at home that couldn't have been a whole lot better what you just made. Build yourself a milling machine and a clientele and you'll never go broke. You might never sleep, but you'll never go broke. I wish I could do what you did here. I definitely missed my calling. I could have inherited my dad's shop had I the interest back when he retired and sold his shop. As it turns out I have the creative mind for this kind of stuff, but lack the education. Stupidest thing I ever did was cheat my way through math class in school. In awe of you man, you're on the right track.

@burtybasset4486 3 жыл бұрын

Don't let lack of education hold you back. I think if you have the will to do something you can make it happen! Plus we are in the age of the internet so pretty much any information you need is right out there. I think any skill takes lots of practice, so start practising, but be cautious. I taught myself to weld recently after watching KZfaq videos. I also fixed my car after my cam belt snapped and bent all my valves again mostly from KZfaq videos. I had to buy new ones and grind them in, and you have to get the torque settings for the head bolts right, but you can find most of this information in Haynes manuals.

@thetedmang 3 жыл бұрын

Mathematician here. I often wish I stopped studying math at a certain point and got into engineering when I was younger. The math problems that give engineers trouble can usually just be "engineered" around instead of directly solved. Math is beautiful but making things with your hands is so much more rewarding.

@burtybasset4486 3 жыл бұрын

@@thetedmang There is nothing stopping you from buying the tools and tinkering for yourself. The little iGBT welders are pretty cheap these days and the one I got works great and no one ever taught me to weld, I just figured it out for myself. Just be safe. Skill and mastery come with practice.

@thetedmang 3 жыл бұрын

@@burtybasset4486 Fair points, thanks!

@user-hh4cf8tm4n 3 жыл бұрын

し

@traytrid9367 10 ай бұрын

The best thing about this video is....there aint no soothing therapeutic music playing in the background. Wonderful craftmanship

@quimblyjones9767 Ай бұрын

There definitely is 😂 it's just quieter than usual

@themorawaboy Жыл бұрын

Utmost respect to you, Sir. When you buy something, you improve your life by owning it. When you build it yourself, you improve your life and yourself by building it.

@briancornell482 3 жыл бұрын

Dude, who does this? Someone hire him in a seriously awesome fabricator industry. He's ready to lead.

@CleoKawisha-sy5xt 10 ай бұрын

u have no clue

@fieromaury 6 ай бұрын

Hope is making more money now…

@magnitudefallout3944 3 ай бұрын

as someone who has even a bit of experience, let me assure you - this is just a video made for clicks

@abdou.the.heretic 3 ай бұрын

@@magnitudefallout3944I know right?? I'm literally 4 months into my specialised technician certification and I can already tell this is just a flashy video.

@charlesgargotta23 3 жыл бұрын

Really beautiful work and it goes to show what you can accomplish once you commit to doing it. Having been a machinist I notice a few small things that ideally would be more tightly fitted or precision ground for better accuracy but this is a great piece of equipment that will last years and can make any needed upgrades or replacement parts. My only criticism is that the belt and pulleys need to be covered before use and with that amount of slack a tensioner will reduce noise and slipping. Solid 9.5 out of 10. And for anyone who is upset about the half point it's for safety. No machine will tear you apart faster than a lathe. Having to watch the work is enough you don't need the pulley system as a threat too.

@ferrumignis 2 жыл бұрын

_"No machine will tear you apart faster than a lathe"_ I'd much rather be using my old 1940 lathe with exposed pulleys than a table saw, or one of those hideous PTO powered screw log splitters.

@charlesgargotta23 2 жыл бұрын

@@ferrumignis those machines will maim you for certain. But if a lathe grabs you you're losing whatever limb got grabbed, arm, head etc. I try to be very accurate in my words. If a lathe grabs you it will tear you apart. Not cut, not shear. Rip. You lose a finger to a table saw, or a splitter a good doc might be able to fix it. Lathe yanks your arm and rips something off or takes your whole body for a ride they ain't fixing that.

@daveawb Жыл бұрын

@@charlesgargotta23 This. There is no comparison to the damage a lathe will do to you versus almost any other tools.

@James-on1vy Жыл бұрын

Beautiful work? You're joking right? From tacking the channel together in the beginning I could already see how shit this would turn out.

@udokankamnebe2748 Жыл бұрын

That's why Lathes are equipped with foot brake, if you remember to use it. That pulley area has to be covered.

@ultraderek Жыл бұрын

Using your incomplete lathe to build essential parts for it is baller AF.

@Larslegos 5 күн бұрын

It's like using a 3D printer to build parts for your 3D printer, it will never not be cool

@seanhaynes8758 Жыл бұрын

I have watched this video over and over, completely blown away at this persons skill...amazing work!!

@heamorhoid 3 жыл бұрын

I don´t understand why so many dislikes. This is absolutely nice job. He made fully functional lathe machine AT HOME. Thumb up sir.

@theboontz58321 3 жыл бұрын

Dude literally hand-built a metal lathe with basic tools

@krishnakushwaha6631 2 жыл бұрын

110

@bobrawley4474 4 жыл бұрын

I am 50 years old and have been a machinist for the last 30 years. You have impressed me sir and I don't get easily impressed. If I could I would send you a bottle of cutting oil. ;) Have I great day,

@sibalogh 4 жыл бұрын

Indeed, this is an impressive construction! I'm quite cluey myself but, for some reason it never occured to me building a lathe this way other than stretching my brain how to construct a CNC type. Yet, this is a suitable one to modify it into a CNC controlled later...

@Gwiedert 4 жыл бұрын

I wonder what you have been doing for 30 years if you are impressed by a bit of welding, drilling and cutting connected together with some parts from the hardware store.

@jeffwood8109 4 жыл бұрын

@@Gwiedert I think he was more impressed by the thought process in designing and making it work. But you probably wouldn't understand that.

@lpi6608 4 жыл бұрын

@@Gwiedert I agree, A millwright is precision, bigger bearings help too, my first lathe was a rockwell 36" lot of fun

@umityayla5051 2 жыл бұрын

@@Gwiedert Guido you better show us your hand made aircraft.

@firdausselim9632 4 ай бұрын

If there are a thousand likes, I will give you a thousand respects

@cardinalgeneralclinic7328 2 жыл бұрын

This z a very smart brain. IAM a medical Dr, who loves technical stuff coz it gets the brain sharper. Just love u bro

@BigBoyLies 3 жыл бұрын

instead of buying a new one or refurbishing an old one, dude decided to make a new one. RESPECT!

@falconseyeaerialservicesll8176 3 жыл бұрын

Totally! Hands down.............

@msnaruka5638 3 жыл бұрын

Parts kha milte he what prices

@Eden_M 4 жыл бұрын

You prove that ANYTHING is possible with the right set of skills, determination and taking action, and you my friend, are a perfect example of the above!

@ronaldatkinson9165 4 жыл бұрын

The above message stopped a little short: You also need the right tools and the right supply sources. I tried a Gingery lathe. Every mistake snow-balled into an incomplete and imprecise paperweight. I like his work.

@johannesniskanen7370 5 ай бұрын

I know your secret. You think simply and simplify your thinking, then you apply your thinking to your structural design, you also apply that simplyfing touch to your broblemsolving tasks. Then you come out with simple but brilliant materialised outcome, im student of this process. Brilliant!

@absalommasekoi2174 Ай бұрын

@josemanuelavila9429 2 жыл бұрын

Extraordinario!!!! No pensé en que nadie se pudiese fabricar su propio torno. Simple, pero efectivo. Enhorabuena.

@chrissollazzo6835 4 жыл бұрын

Being a machinist, I am reliving my youth through your videos. They're great! I appreciate your work and enthusiasm! Keep them coming. 😁

@tonytor5346 Жыл бұрын

Where do you buy the parts? Can you make a list of the parts nreeded, dimensions?

@CleoKawisha-sy5xt 10 ай бұрын

@tonytor5346 do u want us to build it for u too? if u cant even be bothered to source your own parts, u have no chance at all of succeeding

@abdul-kabiralegbe5660 3 жыл бұрын

I like how he uses the as yet unfinished lathe to make a perfect circle out of the plate the chuck is mounted to. The lathe's begun service even before it was fully ready for service.

@robertoconner8592 3 жыл бұрын

Ññññññññññ

@tiagoeduardo6929 3 жыл бұрын

@gregmoser2086 3 жыл бұрын

That's called bootleg building. Get it working enough to make more parts to make it better. This kid is going places.

@akindiranolanrewajujohnson1873 3 жыл бұрын

Love it as that build and work to produce parts for self. Good

@rvag3394 3 жыл бұрын

This is just a neverending spiral, with lathe like this you can make precise spindel shafts and so on, you can now start working on a mill and once you got lathe and mill you can work on more complicated mechanisms and so on.

@giotispaok2167 2 жыл бұрын

No matter what we see here that guy deserves a huge well done for that project.

@ashkansherafatifard9167 Жыл бұрын

Thank you for teaching me how to make a metal turning machine. I have a bachelor's degree in technology engineering. It is not good for people here to be able to buy a high-quality and up-to-date device and earn money with it, but with the video that you sent, dear friend, many people can make one and earn as much money as they can with it, so that in the future, they will buy a more up-to-date device. Buy the higher quality. Since I was a child, I have wished to have a lathe to make the thoughts that come to my mind, but unfortunately I have not implemented it yet. I always thought how to make one. Fortunately, I was very happy after watching your video. So I will buy the necessary parts and make one. Thank you again dear friend.

@jerryocrow1 Ай бұрын

He has the satifaction of putting his dream into reality, right in front of our eyes. True, safety was neglected, which he will overcome in time. Most of us project our dreams into his action and admire him. Both are good.

@georgeabraham4285 4 жыл бұрын

Best one I have seen to this point in terms of cutting to the chase, wasting the least amount of time later and having room for everything to come..

@BirdmanNorfolk 4 жыл бұрын

No chatter, perfectly concentric, lacks a back gear so no thread cutting facilities, but could be added, better imho than many manufactured products at the lower end of the market, I would be proud of this were it my work!

@edgardorivera7061 3 жыл бұрын

@attheendoftheday8969 3 жыл бұрын

Exactly. This runs better than the one I have to use at work when I have to run the manual lol

@TORAH-613 2 жыл бұрын

This is the best video on how to make a homemade lathe. And ive watched hundreds of them. You make this with simple tools. And even list the parts you use. Thanks for the great video tutorial.

@selvaseelanganeshpandiyan7850 Жыл бұрын

Atleast he bought cutting tools from market. Addictive engineering 💕

@maticus123 3 жыл бұрын

You sir are not a machinist, engineer, welder, or mechanic. You are a freaking magician. Seriously, every video of yours I watch blows my mind. You have a long and prosperous future ahead of you. Keep up the amazing work my friend and never give up.

@drivetime2024 3 жыл бұрын

He's the Filipino Genious

@CleoKawisha-sy5xt 10 ай бұрын

give me a break... u laymen are complete cringe

@user-tr1nd7og5k 3 жыл бұрын

Это лучший станок из самоделок, который я видел на ютьюбе, автору респект и уважение 👍

@kiktor 3 жыл бұрын

Автор талантливый человек, но на этом станке сталь нельзя обрабатывать. Дюралевые направляющие оторвёт, а потом оторвёт башку.

@user-ze2mo2uf1k 3 жыл бұрын

Снемаю шляпу! За идею и за труд. Напровляющие слабые.

@user-wu5jb2vu7i 3 жыл бұрын

Станок замечательный, но больше похож на конструктор!!!? Автор только собирал- сверлил и варил из заготовок со стороны!)))

@mikewollmann 2 жыл бұрын

its so satisfying to see someone using a parallel marker insteed of calipers... using the right tool for the job... love it!

@erx88 Жыл бұрын

Only the best welders can achieve a bead like that with a stick welder...not easy...worked on overhead doors and commerical ramps, we could only hire the best, as the liability was immense if a weld failed, and that's what the welds looked like... Exactly...

@greasysteve5671 3 жыл бұрын

"If you can't make it accurate, at least make it adjustable." -Jeremy Schmidt. Well done

@MediaTechKerala 3 жыл бұрын

Yeah

@rexsolomon6325 4 жыл бұрын

How manyPh.Ds or top graduates in mechanical or industrial engineering can MAKE a lathe from scratch? This is a man with REAL education. Saludo ako sa iyo.

@mikefinley4367 2 жыл бұрын

I was looking for a D.I.Y. lathe build to turn and produce banjo pots. This was fascinating, enjoyable and revealed your design capabilities, familiarization with parts, machining, etc. What my experience of making things has been is that if you have to buy tools to produce something it exceeds the price of simply buying it. So ... It then becomes a matter of self challenge, creativity, possibly doing it better and the satisfaction of knowing you made it, even if it runs over what a purchase would have cost. It would be interesting if you kept a running tab and totaled the cost and compared it to a similar one available. I swear there is a economic Desmond out there making sure the act of making something is cost prohibitive vs buying. Loved the video.

@taxicamel 4 ай бұрын

Well, you comment indicates you know nothing about machine tools .....but that's OK. What IS very clear about this video is the guy actually knows very little about lathes .....but he does know something about welding .....and that's about all. The one weld along the top of the "headstock" was very good. ANY kind of metal "chip-making" machine cannot be made from "steel". This was found out by one major machine tool builder 50 years ago. White Sundstrand built a series of machining centers based on fabricating. the machine frame was very thick plate. The end result was a machine rampant with vibration. CAST IRON HAS INHERENT DAMPENING PROPERTIES. The "E: value of steel is much "better" than cast iron ...but when it comes to machining, cast iron is simply the only "best" way to make ANY machine tool. How do you turn to a specific "known" diameter? How do you generate a thread? How do you machine a taper? A lot of work .....and you can't actually do much on it. .

@creativerecycling 2 жыл бұрын

I like the fact that it has several speeds, a hollow spindle, and the linear supports for the slides. Now you need to make a tail head, and a compound slide. Very useful. I would have put a 4-jaw chuck on it.

@CleoKawisha-sy5xt 10 ай бұрын

tail head? you mean tail stock?

@atastycloud 9 ай бұрын

@CleoKawisha-sy5xt you dont need a tailstock, the cross slide can be used a tailstock

@christhesnaildriver 3 жыл бұрын

Seriously - Well done fella! Can't argue with the results you 're getting on your turned parts. Nice design and room to add extra features later.

@serafincastilla 4 жыл бұрын

Tuve una sonrisa enorme por 25 minutos. Gran trabajo con tan pocas herramientas, mis respetos y felicitaciones

@evelynerene7857 4 жыл бұрын

Serafin Castilla l

@carlosferreira4853 3 жыл бұрын

boa noite gostei quero saber o preço avista e no cartão telefone 87991079482

@JoseSantos-wv4xw 3 жыл бұрын

Amigo serafín Cómo se llama técnicamente esos bujes con balines y la barra guía ? Dónde se.puede conseguir ? Si tiene una información me pudiera ayudar le agradecería ? Mi cel. 315 9278026 José Guauque. Bogotá Muchas gracias

@serafincastilla 3 жыл бұрын

@@JoseSantos-wv4xw son rodamientos lineales sbr12 o sbr16 el 12 y 16 hace referencia al diámetro del eje en milímetros, se consiguen en Ricaurte, ahí en la calle 13 con 27 cerca a la estación San façon de Transmilenio. A mi parecer son bastante costosos en esos almacenes, si busca sbr16 en Mercadolibre le salen mucho más económicos no podría decirle que diferencia hay en calidad porque nunca he usado los de almacén y pues los barrios cumplen su función

@Darren_Barclay 2 жыл бұрын

Am a noob when it comes to engineering, designing and building but you sir are something else and you inspire my to push myself, good job again man.

@CleoKawisha-sy5xt 10 ай бұрын

if youre a noob then how do u know if this guy is doing a good as job as youre giving him credit for?

@Darren_Barclay 10 ай бұрын

@@CleoKawisha-sy5xt he made a metal lathe, if that’s not good engineering then what is??

@themadfarmer5207 Жыл бұрын

Great job. I used a car gearbox doing mine Gave me 4 forwards. I reverse. 40 years later. Working👍

@diyexplorer8728 4 жыл бұрын

I salute this man for making lathe machine that I thought it can only be done in the industrial factory. Good job man!

@jbaker8871 3 жыл бұрын

Really impressed. Im sure many people told you it couldnt be done and you built something thats accurate and affordable to build anything else you desire. Bravo friend!!!

@joshmellon390 2 жыл бұрын

I'm finishing up my mill this morning using your same ideas. Thanks!

@metaproxy 12 сағат бұрын

This video was not a waste of my time, thank you!

@user-zj9et2yd4q 3 жыл бұрын

Нет слов. Просто великолепно! Мастер с большой буквы! Лай и подписка однозначно!

@tonysargent1699 4 жыл бұрын

Back watching again. Just can't seem to get enough of this! Fantastic!

@humphreyjones9765 2 жыл бұрын

I Like what you did. Great job. Did you ever build a tailstock for the lathe? Would like to see how you manage to lock it in place with the linear rails?

@gangleweed 2 жыл бұрын

Well ,Well and well.......I've been a fitter and turner for the last 60 + years, now retired, but I have to admit if I was going the get a lathe for the first time this is what I would make.......with a QCTP and a DRO, plus a set of gears for screw cutting what more could you ask, probably have a bigger spindle bore and A/C bearings..........Oh, and I'd also fit a left hand ball screw to the crosslide too.......just forgot, it needs a tailstock as well. Otherwise, a beautiful job, well done with the means available and the outcome is really good......the colour green is the best.

@ronniejarvis2679 3 жыл бұрын

Such an interesting build. Serious display of, “when there’s a will there’s a way.”

@bartolomeupiodasilva4867 3 жыл бұрын

Parabéns... Não é qualquer um que consegue fazer isto ... muito bom. Vc faz pra vender o é só um robi..... Brasil .são Paulo zona leste.

@misamesho4076 3 жыл бұрын

@@bartolomeupiodasilva4867 ققببقي

@rodrigofonseca3915 4 жыл бұрын

I'm impressed man. If someone had asked me before i saw this video, i'd say that's not possible. You proved me wrong. Congratulations artist!!

@elihurumakanza8264 4 жыл бұрын

Rodrigo Fonseca 66.

@sobirinwae7203 4 жыл бұрын

Mantappp

@joeruiz181 4 ай бұрын

Man if you are out there somewhere just know that I watched this video 2 years ago and I went to machine tool tech school because of you. Thank you…

@Slimshadygorebox 2 жыл бұрын

Amazing engineering ! A few Gory comments relating to arms been torn off etc ! I nearly spewed up my tea reading these. All I can say I was highly satisfied watching this video IT WAS BETTER THAN WATCHING DEBBIE DOES DALLAS !

@edwinleach7401 4 жыл бұрын

Really cool. I just love watching metal lathes work. I'm a wood turner though and love to see those curls go flying.

@aliceborges1499 4 жыл бұрын

Sem dúvida o melhor projeto que já vimos KZfaq 👏👏👏👏👏

@motoresesistemasautomatos. Жыл бұрын

Parabéns pela determinação e conclusão do trabalho. Ficou um torno maravilhoso. Inscrito e like.

@pedrorodrigues8853 2 жыл бұрын

Ótimo projeto e bem simplificado!!

@klausnielsen1537 4 жыл бұрын

You have a brilliant mind and a will as strong as stone to pull that off. Well done. I subbed right away. Keep it up.

@johnwoodruff3487 3 жыл бұрын

What a beautifully executed project ,you are a real craftsman sir.

@jacob_90s 2 жыл бұрын

Seriously awesome job dude. Can't commend you enough on this. One of the cool things about this project is that once you have a lathe, you can use it to build a better lathe! Only suggestion I really have is get rid of the split lock washers. They're really only useful if you have a situation where you can't fully tighten a bolt. In this situation where all the materials all metal and you're bolting them all the way down, they're just going to be an extra source of noise. If you have any threadlocker, I would use that instead.

@amaryalvesamorim5342 2 жыл бұрын

Trabalho perfeito. Um verdadeiro engenheiro mecânico. Excelente. Parabéns pelo belo trabalho.

@James-on1vy Жыл бұрын

Exactly. Mechanical engineer. Not a fabricator. Clearly.this was shit

@user-db9ph9lr5o 6 ай бұрын

@@James-on1vyя, как инженер-механик, скажу, что тут дерьмо. Некоторые технические решения действительно отличные. Но, их напрочь перечёркивают другие технические решения, за которые автору надо руки оторвать.

@DTeK 4 жыл бұрын

The precision of your work is just amazing !

@petermarsh4993 3 жыл бұрын

Dear Sir, just like everyone else I am in awe at your skills. Drilling accurate compound holes, beautiful stick welding and producing a low backlash device that looks like it can produce accurate and smooth results. Have you thought of making a tail stock? That would complete the build. You may need to add locking to your cross-feed and longitudinal feed so that when you are cutting cross-feed, your long track doesn’t move by itself. Well done. One day you could throw away the belts and have a fixed motor with VFD and have infinite control over speed. You’d be able to get higher speeds as well. Cheers.

@jonathanmansagam6109 2 жыл бұрын

Ģttt

@sinchrotron 2 жыл бұрын

Well... If it looks like a lathe, sounds like a lathe and weights like a lathe, it is definitely a lathe!

@humbertodiaz8283 2 жыл бұрын

Lo felicito extraordinario trabajo que maravilla de conocimiento hombres como usted es lo que necesita un país para progresar

@doddydwi9850 3 жыл бұрын

I really like it when you left some parts of it to be unfinished, you put some imperfection to makes this build Perfect ! Outstanding ! Very Well Done !

@8squarefeet190 4 жыл бұрын

Very nicely done! No need to build a machine that's initially accurate to tens of thousandths.... if you're making parts to hundredth's! Now you have a machine, that can make the machine that made them, more precise if you need to!

@-EmCEE- 2 жыл бұрын

That’s bad ass, can’t believe how true you made everything and made it look simple. I wish I have one lol…

@alexanderngadimin3931 2 жыл бұрын

mantap sekali. ini jelas udah skill profesional...dari awal lihat hasil las,an sangat halus dan rata. mesin bubutnya jg sangat ok 👍👍

@richardpalmer6196 4 жыл бұрын

Phenomenal !!! I only have a 10" mini lathe . Thanks to the clear instruction subtitles describing the parts l can try and duplicate what you've done . ( key word here is try 😊 )

@simomchwata8893 4 жыл бұрын

@CXensation 4 жыл бұрын

Keywords are "I can" ... And then you can do it !

@zsozso411 3 жыл бұрын

Loved every moment of this build! Some nice welds as well, brilliant job!

@rudijanuarfirmansyah8379 2 жыл бұрын

Mantap jadi profesor otomotif dan modif bikinan sendiri hasil karya sendiri bisa di jual karya nya dg ide cemerlang bikinan mesin sendiri mantap 👍👍👍👍👍tampil oke

@sandraalvesderesende4647 2 жыл бұрын

Top demais projeto de fabricação parabéns 👏👏👏👏👏 ficou show 😀👏😀👏😀

@wellysson2011 2 жыл бұрын

vou começar a juntas as coisas no site da china fazer um pra mim

@johnbesharian9965 3 жыл бұрын

This is the difference between a machinist and a toolmaker. You're well on your way.

@attilawagner7599 4 жыл бұрын

I've seen a lot of homemade lathe, but this one is the most superior so far! Congratulations!

@ruralicon2801 2 жыл бұрын

I always respect Hard working and dedicated person like you sir , Great work .

@s.s.productions 2 жыл бұрын

I am hugely impressed with the entirety of the video content! I have a small workshop and I have been looking to buy a small lathe for simple work. I am mildly contemplating trying this project, but I remember how many times I thought as I watched the video: maaan, if I were to mark and drill these holes, I don't think I stand a snowball's chance in hell in making them as precise as the author of the video! I have been making simple constructions and the issues with drilling a multiple holes in a precise position is painfully familiar. Much respect for the final product! I want one :)

@auraswolf 2 жыл бұрын

draw it up in a CAD software and just print out 1:1 size parts (the rails just make a segment 1:1 that u can locate ez) and stick it to ur metal should make it easier to make less mistakes.

@ghettmo50 4 жыл бұрын

This is excellent. The only oversight is a belt guard over the pulley's and belt for safety purposes. Without the guard, this lathe can also be used to slice, dice & julienne fingers!!! Adding a belt-guard would not be difficult or expensive... and well worth the effort & expense. It will also protect the belt from unintended damage.

@grt8guy03 4 жыл бұрын

today I went and bought 8" channel steel base, ordered rails. this is going to be one fun project, Thank you for sharing

@kellytedder7768 4 жыл бұрын

why the 8" channel rather then the 2 x 4" channels? i like the that the 4 '' gives you a little more supporrt down the center of base

@sterlingdavidgrasssr 4 жыл бұрын

How about just going and buying you a lathe... you will never finish it ?? I bet'u don't..

@KrovGame 4 жыл бұрын

D Grass shut up , many people have more determination and courage than you sheep.

@dreizenit7758 Ай бұрын

@@sterlingdavidgrasssrit's simple really. esp. if u have a tig or/and mig. i did a shorter version.. for my coil cores (tattoo machines). a 2800 rpm motor, steel plates and rail. i only use it for coil cores i dont worry much about runout and all.. way better than those cheapass mini lathes online (plastic gears 😂)

@tolimense8882 2 жыл бұрын

Algo tan complejo, lo hizo ver como un juego de niños. Asombroso, mil felicitaciones, Ingeniero.

@raulestrada7796 2 жыл бұрын

Amazing vídeo without excesive words & advertisings & ego You shown only knowledge

@colinfurze 4 жыл бұрын

thats brilliant and a lot of work, I tip my tie a cap.

@letslearnsomething30 4 жыл бұрын

Woooow 😯😯 Thank you colin I always watch your videos

@solidol_workshop 4 жыл бұрын

🤔

@letsbuildsomething4317 3 жыл бұрын

oh my two idol. you two are great. i want to be like you two.

@frzzzdtm 3 жыл бұрын

lmaoo this british dude

@bigstretchdaddy 3 жыл бұрын

Woe dude. COLIN FRICKIN FURZE!!!! SWEET!! Man your doin something right when the inventor and engineer king himself says your doin good!! Congratulations!

@MrStarTits 3 жыл бұрын

the best part is when he uses his homemade lathe to make better parts for his home made lathe!

@sociallyawkwardguy7106 3 жыл бұрын

I was about to say that 😆

@balexfox Жыл бұрын

Cool project it can repeat more people who need this. Thank you very mutch.

@balexfox Жыл бұрын

Next step servo and auto

@zoesdada8923 4 жыл бұрын

Yeah I'm a big fan of those linear bearings too. They really simplify the whole process. I've wanted to do this for some time.

@SomeTechGuy666 4 жыл бұрын

The non raised linear rails actually flex less. They are used in smaller Fadal and several other VMCs.

@Relax72Relax 4 жыл бұрын

Можно много тут трындеть о том что станок не точный,не жесткий и не долговечный. Но сам факт что у чела руки ростут откуда надо достоин лайка и подписки.

@dariogonzalez6249 4 ай бұрын

My utmost respect for you,multy craftman with great precision,thanks i was looking for this video, one thing for all making videos plz chield your welding that only those of us with brain stem cell problem causes great damage,i just learned the hard way,👍 thanks again.

@LilMissMurder3409 4 жыл бұрын

Remarkable piece of fabrication, my young friend. Beautiful!

@paflyfish 3 жыл бұрын

Unbelievable. I have a small Sherline mini lathe and this puts that to shame. Was impressed how true the headstock spun. Wasn't sure it would.

@Hedrix01 3 жыл бұрын

Although i'd say that even that mini lathe is more accurate than his homemade one. Lots and lots of unmachined surfaces and everything is measured with rather basic tools or by eye. Also this doesn't look very rigid. So next step would be using the lathe to build a mill, then building a new lathe and a new mill with those tools.

@thedolphin5428 10 ай бұрын

My only alignment worry was the bow caused by the initial channel welding for the table sliders. Thicker C-section, or box section a bit better.

@martinda7446 2 жыл бұрын

If you want to be even more mind blown, In fact on another level of mind blown reserved for likes Leonardo and pure genius. See Dan Gelbart and his home made lathe. Wait for it...

@ebrahimhamid5204 4 жыл бұрын

Hi, I am an Iranian and I live in Iran. I saw this clip that you made and I fell in love with it. I wanted to make one myself like the device you made, but unfortunately I did not find any of the devices that you used in Iran? I wish I could see you up close and make friends with you and learn from your knowledge. Your family will surely be proud of you. Blessed is the happiness of your family and friends who have you. May you always be successful and victorious! Ebrahim Hamid from Iran, Ahvaz

@Molb0rg 4 жыл бұрын

what kind of tools do you have?

@ulysses_grant 3 жыл бұрын

This was an amazing job. A piece of art. Thank you for sharing this brother, God bless!

@justinraab8062 2 жыл бұрын

Very impressive my guy, you’re one smart fella 👏🏼👏🏼

@didimoco5457 Жыл бұрын

Você é um gênio parabéns pelo magnífico trabalho na construção deste torno mecânico abraços.

@Fahmy3333 4 жыл бұрын

The idea of the lathe machine is perfect and so for the black smith who is genius!

@-danR 4 жыл бұрын

Now he can use the lathe to build a drill press and make screws, bolts, nuts, and ball-bearings. and the drill press and lathe to build a planer. And the planer, drill press, and planer to build... ...a lathe...

@JohnTurner313 3 жыл бұрын

This might be the best KZfaq video I've ever watched. Nice build, extremely impressed!

@prostoy_sovetskiy_inzhener 2 жыл бұрын

It turned out a good working model of a lathe. It is the model, because the rigidity of the frame does not stand up to criticism, especially in torsion. It was necessary to use at least tubular profiles of large cross section.

@user-rr8tb1xm9p 2 жыл бұрын

Отличная идея!!! Всё просто и доступно!!!! СПАСИБО!☝️😉👍👍👍👍

@joeyetwaru5500 4 жыл бұрын

Your knowledge of engeneering is awesome ,hatsoff to you

@carioca762_-_ 3 жыл бұрын

Lindo trabalho !!!! Ficou espetacular , sua máquina . Parabéns e obrigado por compartilhar seu conhecimento conosco 👏👏👏👏👏👏👏👏👏👏👍👍👍👍👍

@AutodidactEngineer 2 жыл бұрын

*The only asian channel that doesn't suck!*

@icecreamtruckog3667 2 ай бұрын

Routing the power cable farther away from the spinning belt would be a good idea and making a cover for the belt so you don't hurt your self should help.