Ladies and Gentle Men. Words can not express the level of skills that this man has showed. He has figured out how to build a shop. That tools that he needs he can build his self. And he knows what the metal is. And he knows that it not cheap metal. I stand up and give you a great big chap of ✋ ✋ hands. Great content keep up the great work. Real Talk 101 !!!!!

1:13 Hands of steal... My shop teacher always used to say "careful it's heavy..." and after we burnt our hands and dropped it he would say "told you it was heavy" Dude smokes of a layer of skin and doesn't skip a beat! One of the best scratch builds I have ever seen anywhere!

What a beautiful piece of work. That bandsaw is far better than any commercial unit one could buy. Magnificent build by a man with exceptional skills. Great video to watch.

Compliments for your creations. I mostly admire the fact that you use the machines you created to cut, weld, drill holes and bend metal parts to create other machines you'll use. Keep it up ;)

Здорово! Очень понравилось то, что для Вашей реализации этого проекта не потребовались сложные и дорогие инструменты, например токарный или фрезерный станок - все сделано инструментом, который есть практически у любого мужика в гараже. Результат просто огонь! Успехов в этом замечательном деле! Спасибо за ролик!

Complimenti perché questo non è un restauro ma costruito dal niente con una precisione assoluta. Un operaio con attributi. Molto Bravo!!!!!!!

How I love the masters who briefly and clearly lay out on the topic in 5 minutes

This is a marvel of Mechanical Engineering. Your skills, plan, execution, and design all are of highly engineering knowledge. What a beautiful project and well done. I don't know how to put a better comment than that. I am wordless. Thank you for sharing and I did like your video. I am a doctor but like to watch mechanical project like this. It reminds me of my childhood when I used to watch lathe machining and mechanical work in our town at that time I was 9 years old and now I am 39 yrs. I love to see rusty steel cut into pieces and then turns into shining metal. The cutting is so cool like cutting a birthday cake. I love it.

Great work! Nice to see you used a proper ball bearing race mounted on it's edge for the back of the band saw blade to run up against. Many cheap band saws just have the band saw blade continuously scuffing on the side of a ball bearing outer race to give back support.

the best metal band saw in the video I've ever seen.

I watched this build a year ago and it just came back up in my pull-pile. It's bided on my mind all year. I believe I'll gather up the stuff and add it's distinctiveness to my hobby-shop. (It'll beat trying to cut stuff straight and square with a Spede-Cut disk.) THANK YOU

Absolutely breath taking, what an incredible build!

This build is awesome. I've seen a lot of wood band saw builds, but this is the first metal band saw. Great job!

Cool made, much better than from the store . You can immediately see a real professional . Respect

You have a lot to be proud of. That’s one of the most amazing videos I have ever seen on KZfaq. Your fabrication and engineering skill is remarkable. Thanks for making the video

Outstanding build and design! One of the best I've seen in fabrications from scratch. Thank you for sharing your talent, skills and passion!

Bro introduced your own brand of band saw. You would sell these like crazy

I would love to take a trip to Poland 🇵🇱 and witness some of this craftsmanship Live in Action!!! 👍👍AMAZING SKILL!!!

One thing i love about building power tools like one you built is that you can maintain it and fix it easily and there is not unnecesary electronics inside just good old electromotor and safety on/off switch. Keep up good work.

I really like it! I told my wife if I had the bearings I could do that. You know what she did, she went and found them online. I now have my next project. I’m a lucky dude. Thanks Ron

This channel should be called Heavy Industry Workshop From Scratch! Your amazing!:))

That bandsaw looks better built than most industrial saws I have seen. Well done sir.

He imagines all the blueprints of each part inside his head.amazing

Absolutely superb attention to detail, amazing video, the compressed timeline makes this easy to watch.

Really amazing and incredible high quality made metal band saw. For guy which has made it only highest respect.

И как мастеру, и как оператору - респект!

Man you clearly know how to make good, functional, professional looking stuff!

Это шедевр!! Я "залип", смотрел как завороженный!! Мастер!! Все шикарно сделал!!! Респект тебе и уважение!!!

wow. you are some kind of mechanical genius to build the things you do. amazing. well done.

Your skills and knowledge base are truely remarkable. This is a high quality build, but so is all your other builds. Much that I can learn from you.

When a machine builds machines. Skynet anyone?

one of the most impressive videos I ever chose to sit and watch. the talent shown is remarkable.

Man, that's one of the most awesome machines I've ever seen made. Just amazing work!

Thats some high craftsmanship skills right there , i can watch this dude all day ... Great job , hugs from USA

It is impressive how straight you can cut with the angle grinder

Perfect job. You have gold in your hands. Congratulations

I like the fact that it has a 3/4" blade

Man you are a genius. Your work is ART !

Your passion is clear in all your work.

LOVELY COLOUR. Total enjoyment after a day in our Model Engineering Workshop. David and Lily Reading England.

Wow! That went way beyond my expectations! Amazing work!

This guy could mass produce these That's how good he is. I'm impressed

Woah! That is an insane work! It is like the high quality, and like a branded band saw that are bought.

This guy is a tools master ... 👍 and i am jeleous not only with the high quality product he made but also the complite tools he use... Amazing....

You are creative in the full sense of the word, I am happy to join you

ONE LIKE WILL NOT BE ENOUGH FOR SUCH A BEAUTYFUL WORK GOOD JOB MAN!!!!

That is BAD TO THE BONE! Great job! Thank you for sharing your work.

My belief in humanity is restored

Very nicely done. I am going to save to a playlist so I can reference it for a future build.

Kawał dobrej roboty, i wykonanie na najwyższym poziomie, Pozdrawiam z Polski.

Very impressive. Thank you for making and sharing the video. Looks rock solid.

I recently discovered your channel (and subscribed) and have been watching your many videos in utter fascination. I am an advanced level fabricator as well and I am absolutely amazed and inspired by your skills. Well done, Sir! Well done indeed!

Fantastic work, best bandsaw ive seen

You handled that build very well. I know there had to be research and tons of other preparation , but still.. Nice job.

I think the most important link you omitted is to where to buy the motor or the right angle gear compartment in front of it which is the heart of the bandsaw.

Você é daqueles HOMENS que merece MEDALHA DE HONRA. Parabéns pelo Trabalho. Sta Catarina - Brasil.

Holy Fraggle Rock, that's about as cool as it gets right there.

I dream of having a desk like you.

Amazing job and really nice video as well! Thanks for letting us watch.

Love that hydraulic vise !

Великолепный станок вышел из под рук профессионала. Ждём последующее видео. Нужно обязательно добавить систему СОЖ. Жаль что заранее ванну на нижней станине станка не предусмотрели. Хотя с такими руками это не вопрос. Удачи вам, и вашему каналу.

Brilliant. I wouldn't even know where to start.

I'll bet that saw is better than one you can buy in shops. Excellent attention to detail.

Hello from Yorkton, Saskatchewan, Canada. Thanks for sharing your great video’s please keep them coming.

Wooooooaa!! That's amazing!! Just put your signature on the cover! A work of art.

Muito bom, muito bem feita essa serra, ótimo profissional. Multiuso, corta em vários ângulos.

I came from the wheelbarrow you built and I saw the belt saw which I definitely would need to. But this one is almost as complicated to get the parts for as the wheelbarrow itself. Also very well done!

fantastic is understatement, really appreciate your talent, skill and the PASSION!!!

That is seriously a kick ass build.

Damn! Talk about heavy heavy duty band saw.

Good day! I hope a person like you has students, because such an experience as yours must be passed on to the next generation! After watching your videos, I understand that I don't know how to do anything.

Brother I wish you was my neighbor man bro you have mad skills an talent out of this world good job

That was amazing to watch. I was trying to imagine what the drawings would look like for those blade guides you made, too much for my simple head though. Big thumbs up.

Your content is amazing 👏

If you ever need a Company name, "Eternity" it is, this is build to last a eternity, absolut great workmanship and attention to detail. Thank you for sharing.

Lavoro fantastico! Certamente deve essere stato progettato prima, vista la precisione dei vari pezzi.

This man got some skills 😎👍

I really congratulate you on one of the most successful jobs I've ever seen. and it would be nice if there were material lists.😁😁😁

Mistrzostwo! Lepsza niż moja fabryczna taśmówka cormak!

Djenkuje bardzo... that was the best video ever with god like confirmation at the the end with 2x45 degrees spot on. Awesome! Spokko!

Seriously you need more subscribers... At least more than 500k

There is nothing nowhere near as robust as this on the market. Impressive!

I've watched a few of your videos now. Great channel keep them coming, very few channels now that I find worth watching!! Excellent work!

One of best build I have seen

As an additional bonus to it you could swing it to vertical and make a table with a slot for blade in it and one leg to tighten into vise. Then you could freehand some part cutting.

А многие думают что кустарное это хуже и дешевле.... Кустори рулят!!!!!! Спасибо и удачи 👍👍👍👍👍👏👏👏👏

The hydraulic cylinder is genius

Just wish I had all ur tools used to make this! incredible build as always 👍

In another video, you could make a coolant system for the blade 😊

been waiting for this... Thank you

I REALLY CONGRATULATE. YOU HAVE INTELLIGENCE AND ART TO BE RESPECTED...

Nice project and looks great.

Очень крутая ручная работа! Золотые руки! Подача СОЖ ещё нужна. И корыто для этого.

No hope of a normal person doing this. I'm in awe that you did this, but obviously know what you are doing.

Your videos are sensational, I'm an industrial designer and system developer, I work more as a developer than a designer, but in my spare time I'm manufacturing my CNC Router, to open a company and act more as a designer. I have no experience with soldering, I see this machine you are using it seems to be super simple, there is this model of machine here in Brazil.... I will definitely want to make my tube cutter as well.

A plan professionally implemented and accomplished.

Fantastic work, dude! Really well done!!! 😃 Stay safe there with your family! 🖖😊

Excellent project

Super impressive, especial without a lathe or a mill. Well done, respect. Regards Alan

If one day the youtuber of this video could build a lathe machine from scrach by just using off shelf product bearing,shaft,jaw plate, it would be an amazing achievement.