Homemade paramotor built out of EMT conduit part 1
Рет қаралды 9,187
3 жыл бұрынWhat's crazier than buying a motor and propeller and attaching it to you back to fly? Building one at home! I'm going to follow this up with final construction, hang tests, and maybe a test flight.
Do not try this at home. This is for your viewing entertainment only.
@sandrainthesky1011 2 жыл бұрын
That's what I used for mine too, pretty light and trouble free!
@pippadot679 3 жыл бұрын
No wonder you retired the other paramotor building a brand new one!
@itukuppoo4280 3 жыл бұрын
You forgot to mention that trying to weld through the zinc coating produces a weak weld that tend to crack.
@sandrainthesky1011 3 жыл бұрын
I made mine with conduit and MIG welding, if it's piled on good it's quite strong, but yes the zinc should be right off of it
@PRATHI21Jaga 3 жыл бұрын
Cool 😎
@devsss648 3 жыл бұрын
Waiting for the final result..... Best of Luck👍
@zoeconner11 2 ай бұрын
Would you have or know a link with plans? Thanks
@ezequiel.c4351 2 жыл бұрын
could you share the plan?
@bradbrown2168 2 жыл бұрын
Weight of frame?
@luisalfredoarias4590 2 жыл бұрын
Excelente proyecto Me puedes enviar el plano Aca en colombia es muy caro comprarlo Me gustaria fabricarlo Gracias
@HilltopZombieShop 2 жыл бұрын
Lo siento. Yo no hice planos.
@luisalfredoarias4590 2 жыл бұрын
@@HilltopZombieShop amigo la estructura es con tubos de acero de que diametro y espesor?
@jasonjares1936 2 жыл бұрын
@@luisalfredoarias4590 1/2 in.
@luappaul7240 3 жыл бұрын
Just grind the coating off the best you can before welding that coating causes cancer hope it turns out for ya so far looks good
@bradbrown2168 2 жыл бұрын
Anyone use aircraft aluminum on this plan?
@joatmon_servant Жыл бұрын
6061? Expensive no?
@themechanic4222 3 жыл бұрын
Too heavy at least if u going to put on it 747 engine
Modeling propeller blade from linden wood which will be used to make a mold for carbon fiber product
Szczepan Rachwal
Рет қаралды 6 М.
Mark Huneycutt
Рет қаралды 14 М.