Homemade Retractable Awning, Cargo Camper Conversion Trailer
Рет қаралды 33,736
Күн бұрынIn this video I show you how I built a retractable awning for my cargo trailer camper conversion. I used EMT conduit and connectors from a company called Maker Pipe. makerpipe.com/
If you are interested in purchasing any of my 3D printed components or merchandise, or to reach out, check out my website
northwoodsengineered.com
The parts i used from maker pipe are linked below
2X Telescoping connectors: makerpipe.com/collections/mod...
2X Adjustable Angle Connector: makerpipe.com/collections/mod...
2X Adjustable angle end clamp only: makerpipe.com/collections/mod...
3/8 /Threaded pipe inserts, no lip: makerpipe.com/collections/mod...
1/2" shim: makerpipe.com/collections/mod...
The brackets i used to mount to my trailer were from the local hardware store.
Here are some of the items that I used that I ordered off Amazon
Canvas: amzn.to/3nBsDov
Zipper: amzn.to/3IfE6Um
Spring clip on top of trailer: amzn.to/3y94nyS
Spring Clip on vertical EMT: amzn.to/3bG086d
M6 Knobs: amzn.to/3bOP32L
Full Cargo Trailer Vid: • Cargo Camper Conversio...
Cargo Trailer Folding Beds: • Cargo Trailer Conversi...
Cargo Trailer Electric: • Cargo Camper Conversio...
Here are some other items I used in the camper build.
Rubber latches for bed: amzn.to/30EbrXx
Cargo Net: amzn.to/3Cjwpb2
Blue Sea Fuse Block : amzn.to/3CrffID
Battery Box: amzn.to/3wWDcGz
Fuse containment box: amzn.to/3qIJnwH
Battery Kill Switch: amzn.to/3Dq7KD7
USB Charger: amzn.to/3wUQu6h
Master Electric Panel: amzn.to/3nopZmy
Folding Hooks: amzn.to/3noq8X8
Folding Countertop Brackets : amzn.to/3kKlaCA
Water Pump: amzn.to/3wZ0sUf
Cup Holder: amzn.to/3qNPDDG
Disclosure: I am a member of the amazon associates program, which means if you click on the link above and buy something off amazon, I receive a small commission for eligible items. This does NOT affect the price you pay for items.
@richardbrady2818 11 ай бұрын
Sure you're very happy with it just cause you made it yourself, and probly saved yourself a large amount of money, thanks for sharing your design.
@northwoodsengineered 11 ай бұрын
You bet, happy to share!
@MakerPipe 2 жыл бұрын
This is awesome! Thanks for sharing your build and process.
@northwoodsengineered 2 жыл бұрын
Thank you! Wouldn’t have been possible without your awesome products.
@danemmerich6775 9 ай бұрын
Great Awning set up. So far my Favorite. I have to pull from so many ideas cuz I want 15x9 Minimum. 15x15 will just give the hang down effect for sun or driving rain. I never knew about the extra pieces you can buy for emt pipe. Thanks for the video!!
@northwoodsengineered 9 ай бұрын
Thank you! Glad I could help with some ideas.
@michaelnash9970 Жыл бұрын
😳 WOW 😳 YEP THAT'S WHAT IT IS!!! Been tent camping for over 45 years. The memories are beautiful but the body an't. I've selectively watched personal videos on conversions as I already have a utility trailer. Your design is the simplest of five that I have watched. GREAT 👍 JOB !! Love the hardware and details. I was think'n about making several small ones for over the windows rather than one huge one on one side. Everyone else's designs included forced me to use lots of PVC and up-right poles. Your design relies on the side of the trailer 👍👍 I wish You the best.
@northwoodsengineered Жыл бұрын
I’m glad you like it so much! Love getting comments like this, thank you!
@flushot6513 2 жыл бұрын
Thanks for letting us watch your videos
@northwoodsengineered 2 жыл бұрын
You are welcome!
@ReelSouthernOutdoors Жыл бұрын
Nice build, I have been looking at doing something similar for my Suburban that mounts to the roof rack I built. Thanks for sharing
@northwoodsengineered Жыл бұрын
Thank you! Good luck with yours
@GalenGreenlaw 2 жыл бұрын
Fantastic build!!!
@northwoodsengineered 2 жыл бұрын
Thank you!
@user-id7ut4yf2g 10 ай бұрын
Wow, so clever!
@northwoodsengineered 10 ай бұрын
Thank you!
@ktwingstrom 2 ай бұрын
This is an impeccable build and the video is perfect. Well done!
@northwoodsengineered 2 ай бұрын
Thank you!
@jamiesomma2566 2 жыл бұрын
Very nice job and so we’ll explained!
@northwoodsengineered 2 жыл бұрын
Thank you!
@VANESSASVANLIFEJOURNEY 6 ай бұрын
I love it this is a great concept
@northwoodsengineered 6 ай бұрын
Thank you!
@bikinijohn Жыл бұрын
Very Nice. Good Job!
@northwoodsengineered Жыл бұрын
Thank you !
@andando_huellas 11 ай бұрын
Perfect idea! Thanks!!
@northwoodsengineered 11 ай бұрын
You are welcome!
@Erniesworld 3 ай бұрын
Nice job, I love the zipper
@northwoodsengineered 3 ай бұрын
Thank you!
@MakingItWork 2 жыл бұрын
nice job. i like it.
@northwoodsengineered 2 жыл бұрын
Thank you!
@sj-gw9wq Ай бұрын
I'm trying to design a little frame for my vintage canned ham trailer, this gives me some hope and ideas.
@northwoodsengineered Ай бұрын
Happy to help!
@sj-gw9wq Ай бұрын
@@northwoodsengineered And thanks for the parts list. I'd shopped Makerpipe before and did again, to find the telescoping connector and didn't see it on their site but your little link up there took me straight to it, much appreciated your time in attaching the links. All these little awnings you see take tent poles and a few guy-lines per pole to hold them up and that just isn't for me. To much work, too much clutter (ropes all over!) and my dog gets tangled in all those ropes. I want a quick n easy down and dirty shade. I'll paint the conduit and sew myself a cutsie little shade. Happy trails!
@northwoodsengineered Ай бұрын
Glad to hear the links got you what you needed. I agree, a lot of awning just have to much going on and too much screwing around. This one is much simpler
@jc9930 Жыл бұрын
Fantastic!!
@northwoodsengineered Жыл бұрын
Thank you!
@johnfarthing6174 Жыл бұрын
Great video! Very clever! Thanks for sharing!!!
@northwoodsengineered Жыл бұрын
Thank you!
@johnfarthing6174 Жыл бұрын
@@northwoodsengineered just out of curiosity, how much money would you say you had in the awning? I converted a 7x16 cargo trailer last August to a camper and the awning and solar panels are pretty much the only other things I would like to add. That and motorcycle tie downs lol
@northwoodsengineered Жыл бұрын
@@johnfarthing6174 I added it up and i have about $170 into it, which is not nothing, but is much less than anything you can buy from what i could find.
@johnfarthing6174 Жыл бұрын
@@northwoodsengineered Yeah that’s not bad at all! Ones I’m seeing are around the $6-$700.00 range! Thank you for your help!!!
@geauxadventuring6039 Жыл бұрын
Great little concept, I’m interested in that spare tire setup you have on the front, we camp out of a 6x12 Lark.
@northwoodsengineered Жыл бұрын
Thank you. So the tire carrier came with the trailer and is an option from triton. It was originally mounted on the inside but I moved it to the front
@stacyg9824 11 ай бұрын
Nice
@northwoodsengineered 11 ай бұрын
Thanks!
@sdnlawrence5640 3 ай бұрын
Very nice design and construction! I'd be tempted to put velcro straps on sides or some grommets with bungees or tarp holders to secure to horizontal arm. (But I'm a retired upholstery guy who doesn't like canvas flapping loose on sides.)
@northwoodsengineered 3 ай бұрын
Thank you ! That’s a great idea for improvement. Should be pretty easy to incorporate.
@shelleyconner9586 Жыл бұрын
Hey, that is my same sewing machine!
@northwoodsengineered Жыл бұрын
Nice! They work great
@hwfranjr 9 ай бұрын
PVC IS A GREAT REPLACEMENT FOR WELDING ❤CAN GLUE IT PWRMANENT WITH LIQIDNAILS WORKS GREAT AND STRONYE WE ALL HAVE ONE OF THESES SEWING MAXHINES IN OUR WORK SHOP,LOL
@dawnw3680 Жыл бұрын
Can this awning be used if the door is open all the way? Maybe the front pole could have a way to stand up on the ground to allow this to happen? Great concept
@northwoodsengineered Жыл бұрын
Unfortunately no I can’t hold the door open all the way if the awning is up, good eye. Yeah I’ll have to try to figure out how to make it work. Thanks.
@ralphramirez9375 2 жыл бұрын
Hi great build and video. If possible can you tell me where you got the ends and fittings? I would really apreciate it
@northwoodsengineered 2 жыл бұрын
Thank you! Yes they are all from a company called “maker pipe”.
@ralphramirez9375 2 жыл бұрын
@@northwoodsengineered Thanks for your attention and quick reply
@parkerjensen9503 3 ай бұрын
You should tie a piece of Paracord onto the zipper so you don't have to use a stool to unzip it
@northwoodsengineered 3 ай бұрын
Yeah that’s a good idea. I do have the stool on the trailer at all times cause we use it to get in and out, it a piece of cord would make it easier.
@sambulate 2 ай бұрын
Great build! It looks like something I could put together. If you have time, I have some questions: 1. Could you pull the awning out further? It looks as if it's extended about 5 feet from the trailer? 2. What would you do differently, if you had it to do over again? 3. How is it holding up over time?
@northwoodsengineered 2 ай бұрын
Thank you! 1. Yes I can pull it out a little further, but It’s limited by pieces of conduit mounted at top on the sides. Those are basically cut to the height of the trailer so when they stick down, they down still below. So if you had a taller trailer you could make those longer. 2. I would attach it differently where it actually goes to the trailer. Another person mentioned in an older comment about using an awning attachment which is basically an extruded piece of aluminum that you screw to the trailer, then sew in a piece large rope into the canvas, then that slides into the channel on the aluminum. Google it and you will see what I mean. Also, use stainless bolts if you will be driving in the winter at all. Salty roads have rusted the hardware. And also, instead of the round knobs, maker pipe sells bicycle clamp bolts that i would use instead. 3. It’s being holding up great so far, but admittedly haven’t used it a ton. But it’s been on the trailer for other trips in the winter when I didn’t use it but the structure is holding up great.
@chrislincoln489 Жыл бұрын
Could you send me a list of the fitting you used and listing for them cant find the 3/4 x 1/2. (I thinh ny computer sent the last one to spam or something) Think You
@northwoodsengineered Жыл бұрын
Yeah I sent an email back to you with a. List. I can try sending again.
@flywiseman Жыл бұрын
Great work, appreciate the links
@northwoodsengineered Жыл бұрын
Thanks for watching!
@craftyoldman 5 ай бұрын
Hey, I am trying to follow along with your canopy build and have a couple of questions. What size conduit did you use for the pocket up next to the trailer? I know you said you put the 3/8 insert in but did not catch the pipe sizing.
@northwoodsengineered 5 ай бұрын
I also used 3/4" pipe up there. Although since i made the video, someone commented on this video about using an awning track rail, which is what i would use if i did it again, you would have to fold the end over a small piece of rope and sew it then slide it into the rail. IF you just google it you will see what i mean.
@craftyoldman 5 ай бұрын
@northwoodsengineered actually, my brother had 2 sun shades that I am looking to piece together instead. It's kind of like what you are mentioning.
@dmc2087 Жыл бұрын
don't know if you thought about fixing a awning track to the trailer first and sewing in a 3/8 rope into awning that would eliminate gap between trailer and awning
@northwoodsengineered Жыл бұрын
No I never thought of that, I wasn’t familiar with awning tracks but just looked them up. That is a great idea, I think that would work really well. Thanks for the advice!
@kevinswinyer3176 Жыл бұрын
Nice job. I am in the process of paying off a 1991 22 foot Class A Motorhome that currently has no awning on it at all, and the prices for Motorhome Awnings are outrageously high, so I am trying to figure out how to do something similar to your Home made Awning... Any Suggestions ?
@northwoodsengineered Жыл бұрын
Thanks! I guess to start, take as many ideas from my video as you can. What about it would you be unable to do?
@kevinswinyer3176 Жыл бұрын
@@northwoodsengineered I am not mechanically inclined at all. I wouldn't even begin to be able to fabricate what you did for your rig.
@northwoodsengineered Жыл бұрын
Ok, not so sure I can do much for you then. You could try to make something way simpler than what I did, something out of stationary conduit that you take on and off each time.
@cabmanist 27 күн бұрын
I really like your design and aiming to use it for my cargo trailer as well but wanted to know if you found a structural reason for not extending past six feet?Im, hoping to get out to 8’ if possible, but didnt want to build if it cant handle it, thanks… awesome build!!!!
@northwoodsengineered 27 күн бұрын
Thank you! I guess for the distance out from the trailer, you are limited by how tall the trailer is, because the piece that ends up horizontal is about as tall as the trailer wall. If it was any taller it wouldn’t work. But I suppose you could make that one telescoping as well and then it could be longer
@cabmanist 27 күн бұрын
Thats what I was wondering if it would be strong enough, thank you sir for getting back to me, you’re a class act!!!
@northwoodsengineered 27 күн бұрын
@cabmanist no problem, let me know if you have any more questions along the way. You can always email me if needed.
@MichaelNelson-ln4ul Жыл бұрын
Could I get a list of all the specific pieces you used for this awning? I want to build this exact thing for my camper.
@northwoodsengineered Жыл бұрын
Yeah I need to add the list of parts to the description. I’ll try to get that done soon and let you know when I do
@MichaelNelson-ln4ul Жыл бұрын
Awesome! Thanks
@northwoodsengineered Жыл бұрын
@@MichaelNelson-ln4ul I posted links to all the parts i used in the description. Take a look there and if you have any more questions, feel free to email me. my email is the the "about" page of my channel.
@MichaelNelson-ln4ul Жыл бұрын
Thank so much!
@ronwatkins2507 24 күн бұрын
On the front of the trailer where did you get the spare tire Mount
@northwoodsengineered 24 күн бұрын
That’s an accessory directly from the trailer manufacturer, triton
@unlimitedj06 Жыл бұрын
👍👍👍👍👏👏👏👏
@richardhuffman58 Жыл бұрын
Dude! You are an Absolute Genius!!! I have a 6x12 cargo trailer. Do you make these to sell? I want one for my trailer!!!
@northwoodsengineered Жыл бұрын
Thank you! Unfortunately no, I do not make them to sell though. Maybe someday
@richardhuffman58 Жыл бұрын
@@northwoodsengineered I could do all the frame work but I have no way of doing the canvas
@northwoodsengineered Жыл бұрын
Im sorry man i just dont have the time right now to make another one. You might be able to find a local sewing shop that could do it for you if you cut it to the size you need and mark it out for where to sew it.
@pocketchange1951 11 ай бұрын
👍👌❤🇨🇦, sweet
@northwoodsengineered 11 ай бұрын
Thanks!
@joeherrold8263 11 ай бұрын
How many feet is the uprights you made
@northwoodsengineered 10 ай бұрын
They are about 4 feet, but the one that ends up being horizontal extends out to 6 feet
@joeherrold8263 10 ай бұрын
@@northwoodsengineered i cut mine off at 5foot and I got two of them for each one
@mikewasko5670 2 жыл бұрын
Are you sponsored? I see so much Polaris stuff?
@northwoodsengineered 2 жыл бұрын
I wish, just found a good deal on the shirts
@shandelebroyles1099 Жыл бұрын
Wouldn't it be cheaper and easier to use a tarp and paint poll's. And definitely less complicated.
@northwoodsengineered Жыл бұрын
Yep, there are a lot of different ways to do it
@chrislincoln489 2 жыл бұрын
Would you make one to sell.
@northwoodsengineered 2 жыл бұрын
I would if I had time but I just have too many other things to work on.
@chrislincoln489 2 жыл бұрын
@@northwoodsengineered Could you make a list of the fitting you used from Makerpipe
@northwoodsengineered 2 жыл бұрын
Yeah shoot me an email to northwoodsengineered@gmail.com
@hwfranjr 9 ай бұрын
The "T" parts can be PVC NOT WELDED,LOL
@hwfranjr 9 ай бұрын
WELDING ALIUMINUM is not easy,lol
@cjsmith6689 Жыл бұрын
I have a lung disease from welding galvanized. Be careful.
@northwoodsengineered Жыл бұрын
Sorry to hear the at and thanks for the heads up. I know that stuff isn’t good to breath
@hwfranjr 9 ай бұрын
IF YA NOT GOOD AT ALIUMINIUM,LIKE ME,YIU CAN SUSBITUTEMXONNECRIONS WITH PVC,THEY WORK,GREAT,LOL
Norex Overland
Рет қаралды 132
Stories From a Van
Рет қаралды 10 МЛН
CREATIVE COUPLE
Рет қаралды 62 МЛН
MotoRaido
Рет қаралды 11 МЛН
Sash Dun
Рет қаралды 22 МЛН