HOMEMADE TRACKED VEHICLE testing t-unit vs tandum hydraulic pumps and 21cc pumps
Пікірлер: 33
@cereus573 жыл бұрын
I like seeing you and others thrash these units! The real difference between the pumps layout comes from the units they were designed for and the space available, I asked the Hydro-gear folks and that was their answer.
@mimimitchell19893 жыл бұрын
How you been , we noticed the tee unit has been out performing the tandum pumps with the same set up so we are going to swap engines in the two machines to see if that might be the difference.
@cereus573 жыл бұрын
@@mimimitchell1989 I think those t-units were over engineered especially for the crazy Dixie Chopper people that always had speed on their minds and the machines were short but wide. I like the way you are doing your research especially when you film it and post it too!
@dzikusdzikusdzikus3 жыл бұрын
Hey Boss! Could you please finally provide some technical details of this machine? Engine and gearbox, power, torque, overall length and width, ground clearance, track width and total weight of it?
@JB-vc2wl Жыл бұрын
Really cool concept. Id say the 21CC pumps are a little small or under powered./not enough flow. They seem to struggle climbing almost like my zero turn mower when they hydros are worn. This would be a great up north vehicle but definitely needs to be a 2 seater.
@kurtschmidt50054 ай бұрын
You should make a panzer 1 replica!! Reenactors would pay too dollar for accurate tanks to use in re-enactments
@chriscecchini2 жыл бұрын
Can you make a video on the track building
@user-bt8xx8st9pАй бұрын
على ماذا اعتمدت لحركة المقاود للتحكم بالجنزير ؟؟؟
@scottmcnichols48858 ай бұрын
May i ask where did you buy your bogey wheels? bogie however ppl spell it thanks in advance
@mimimitchell19898 ай бұрын
I make my lower wheels and the smaller upper wheels I purchase from Harbor Freight.
@anuraggaikwad4441 Жыл бұрын
Please make a detailed video of hydraulic system.
@MrKillaruna042 жыл бұрын
What a great machine. Did you use a differential gearbox or two hydraulic motor instead sir?
@mimimitchell19892 жыл бұрын
I used 21cc hydraulic pumps, pushing two 21cc hydraulic drive motors at 3000 psi of pressure . powered by a 35 HP engine .
@MrKillaruna042 жыл бұрын
Thanks for the answer
@Rodrigues680 Жыл бұрын
Are you going to have some for sale in the future new sub here
@robertd69253 жыл бұрын
Whats a t unit?
@jaridkerwin21993 жыл бұрын
What is the top speed of one of your latest versions?
@mimimitchell19893 жыл бұрын
The new machines will top out at 10 mph . We can make it go as fast as we want but for what we are doing with these units 10 mph is a safe speed .
@jalalja29403 жыл бұрын
Sir, I want to see how to make a wheel chain
@mimimitchell19893 жыл бұрын
I will be showing you how to make the wheels and the tracks in up coming videos . I am refurbishing a older tank and updating the tracks wheels and engines . Thank you .
@MichaudDaniel3 жыл бұрын
Wanted to buy 4 but never have any news from him.
@dzikusdzikusdzikus3 жыл бұрын
Boss, what about some new stuff? :)
@mimimitchell19893 жыл бұрын
Lost footage due to theft so i will be posting what I have starting this week end, about to start editing when I finish this reply . The machine weighs 2200 lbs ,has a 35 hp Vanguard engine , direct drive from engine to 21 cc tandum pumps, supplying 21 cc drive motors . The MAV's length is 9 feet by 5 feet wide . Tracks are 18.5 feet long 11 inches wide and weighs 306 lbs each. The black MAV with the dump bead weighs 3000 lbs . Machines are slow because they were made for climbing steep terrain with a 1500 lb payload over a 50 degree slope .Sorry for the slow reply .
@danfreitas7905 Жыл бұрын
I think you need a better roll cage.
@suroonnguyen80722 жыл бұрын
Can you share more about how it works more specifically?
@mimimitchell19892 жыл бұрын
37 HP engine direct drive to 21 cc hydraulic pumps pushing 3500 psi pressure to the 21 cc hydraulic wheel motors . Thank you .
@kieranh20052 жыл бұрын
Thank you very kindly sir! Much appreciated
@jeremycrisp44883 жыл бұрын
What is the t-unit?
@mimimitchell19893 жыл бұрын
A t-unit connects two hydraulic pumps together so you can drive them with one input shaft .
@jeremycrisp44883 жыл бұрын
@@mimimitchell1989 so what's the difference between that and tandem pumps?