IBC tank wrapping | rainwater harvesting

Рет қаралды 7,347

3 жыл бұрын

We are wrapping our IBC tote for our rainwater harvesting system. This is stop any algae forming from the sunlight / UV getting into the water. Simple garden polythene from the local DIY store and duct tape.
Also a cheap inlet filter made in just a few minutes from a €6 pool filter.
Ian & Julie are building their tiny homestead and soon to be starting the biggest project of their lives - a Passive House Container Home which will be totally off grid.
Please subscribe to follow along with our story and also drop comments below if you have any ideas, questions or advice for us. Also click on the little bell for future updates and to help us grow - kzfaq.info/love/JtD...
#nodig #nodiggardening #howtomake
-- Related Content --
► Homestead Overview [6 months] • Homestead Overview | 6...
► Poly Tunnel / Hoop House Construction • Polytunnel / Hoop Hous...
► DIY Chicken Coop Automatic Door • DIY Automatic Chicken ...
** GEAR WE USE **

Пікірлер: 20

@HomesteadingUncontained 3 жыл бұрын

Be sure to LIKE & SUBSCRIBE! It is the best way to support our channel ❤ Thanks for watching! - and sorry for the bunged up voice, a little bit of a cold..... 🤧

@irfanboro65 2 жыл бұрын

Hello, thank you for your answer, I like that you posted it. Best regards.

@kirmavremmok7306 9 ай бұрын

Great work, I myself am planning an IBC container in a much smaller garden..these tips and workflow is much appreciated..nicely done on the wall-fixing of the tools in your shed

@HomesteadingUncontained 9 ай бұрын

Thank you - we have done the same on our new off grid plot too where we are building. Also put in a 4100litre underground tank so we have plenty of water now 😀

@Graysail0r 2 жыл бұрын

It's so nice to see a project I want to do before I stumble through it myself. I like your DIY strainer! I didn't know why I needed to wrap my container either. I have a container already and will be working on this project soon. Thanks!

@HomesteadingUncontained 2 жыл бұрын

If you can find a black container they are much better and saves the wrapping. But you can buy covers too

@Thankful_. Жыл бұрын

Same!

@simonmiddleton4977 2 жыл бұрын

Great job Ian!

@HomesteadingUncontained 2 жыл бұрын

Thanks! 😀

@teamtechremovall 11 күн бұрын

If I have black and white poly wrap, would it make sense to put the white side facing the sun and black inside?

@mr.weaver2682 2 жыл бұрын

I’m getting everything to do a system like this. My question so far, would a good quality flat black paint work instead of wrapping them? Thanks for your videos.

@HomesteadingUncontained 2 жыл бұрын

I think the paint would peel after a while with the heat of the sun and the expanding of the IBC. They do make black IBC units and I am on the hunt for some locally. You can also get pre made covers for them to save wrapping them. Thanks for watching

@tonyacrittenden4879 8 ай бұрын

Are you doing anything to keep groundhogs or other animals from living or digging under the tote? If so, how? How hot will the water get in the covered totes? Will you mitigate that somehow before watering?

@HomesteadingUncontained 8 ай бұрын

Hi Tony - we don't really get small animals like that - of course we have Mols but they stay to open fields. The totes do not get that warm at all. Only in the black pipe but once it is flushed through it is cool again.

@tonyacrittenden4879 8 ай бұрын

How do you deal with water freezing in winter?

@HomesteadingUncontained 8 ай бұрын

We get a small crust of ice but mainly it is the plumbing - so I do disconnect the pump in winter and replace with a straight thru pipe.

@SuperAudiowizard Жыл бұрын

Hello, do you think koi pond liner might last longer since it’s thicker?

@HomesteadingUncontained Жыл бұрын

It could be but what we have found the tape is the issue. We have started using purpose made covers from Amazon. €20 and they work great. Cheaper than the plastic.

@irfanboro65 2 жыл бұрын

Hello, can you tell me what size tarpaulin you used to wrap the tank. Thank you.

@HomesteadingUncontained 2 жыл бұрын

I am sure it was 3.5m x 4m. It was a standard size off the role at the local builders merchants. I bought 7m for 2 units and the plastic was folded in half.