Did it exactly how you said and we idle under water no issues
@SamTheLumbee6 жыл бұрын
Did a great job
@colemarlowe11544 жыл бұрын
would you recommend the flex hose or pvc pipe?
@crafty9276 жыл бұрын
do u have to run a vent line from the bottom of the carb? from the bowl of it ?
@connersnow2982 жыл бұрын
Awesome video
@cdstruckandoutdoor72197 жыл бұрын
I don't have Facebook or I'd comment there...but anyway, what tire would you recommend for a 1998 big bear 350, full time 4x4, at stock height, with no GR, on stock wheels? I trail and creek ride mostly...
@moo2k127 жыл бұрын
when I put my crank case breather in the airbox it started to idle funny and it would cut off sometimes what's wrong with it ?
@supercanam57057 жыл бұрын
Mud puppy could i snorkle a 2002 honda foreman 450 just by replacing the stock snorkle and doing what you did?
@hadenpalmlund95826 жыл бұрын
So your saying cut and plug the front brake drum breathers right
@masonsebrnn32974 жыл бұрын
Do you use spring clips to seal your vacuum line on the carb? I tried to find some hose clamps small enough to seal it up properly but no luck
@MudPuppyOffroad4 жыл бұрын
Tiny zip ties
@josephelloret36624 жыл бұрын
How do tou go through without turning off the quad
@gardeningathomewithpattyan61817 жыл бұрын
Nice Vid man right on,, looks good so far that spa hose was it 2 inch i take it ?
@MudPuppyOffroad7 жыл бұрын
more like 1.5
@gardeningathomewithpattyan61817 жыл бұрын
ok i was just curious on what size
@Rowdy_Drawdy7 жыл бұрын
you should go ride richloam swamp wma in Webster Florida
@youngguns41447 жыл бұрын
can't wait to see it go deep
@gofastfilms25197 жыл бұрын
What are vent lines
@davidgacia5537 жыл бұрын
Where did you get vent lines form ?? And what size?
@MudPuppyOffroad7 жыл бұрын
+David Gacia Lowes sprinkler line and fittings lol 1/4 outer
@loganlogan7327 жыл бұрын
What if I put a loop in the carb over flow line or will it still stal
@keatin10635 жыл бұрын
Logan Logan no just gotta make it able to come undone
@thelargeone75237 жыл бұрын
Have you ever had any trouble with your rear foot break getting stuck in the down position on your rubicon? I have a 2015 Honda rancher all stock and was wondering if I was the only one having these problems. It is to the point now I can't even push it down. The rear break on the handle bar still works fine it's just the foot break.
@matthess94467 жыл бұрын
i have a 2014 rancher and the foot brake gets stiff like you described on your rancher..i spray where it pivots with wd-40 and its fine for a while..i haven't had time to pull it apart and grease it yet..it would be nice if it had a grease fitting
@thelargeone75237 жыл бұрын
Matt Hess that would be nice! I have tried wd40 but that didn't seem to help. I think it might have a bunch of dirt and mud in it or the cable might be rusted from all the water.
@michaelwaltman14357 жыл бұрын
Clargin check to see if there is anything stuck in it or if the cable on the rear drum has something in it
@matthess94467 жыл бұрын
Sounds like its time to pull it apart!
@thelargeone75237 жыл бұрын
Michael Waltman yep. I'll look tomorrow and see if I can see anything that might be stuck. Thanks for the info
@fl3xfrosty2177 жыл бұрын
cool
@garrettmonk84327 жыл бұрын
Its a pool hose
@909Logan4 жыл бұрын
What size are the vent lines ? Thanks
@evanburns36713 жыл бұрын
1/4 in or 6mm clear tubing
@ObsChevy973 жыл бұрын
Did you use 1.5 inch ?
@cruiselivingston60352 жыл бұрын
1.25
@lmKrispy7 жыл бұрын
i have a 2014 honda rancher 4x4 sra, if i got an hmf would i have a problem with 28 outlaw 2s?
@lmKrispy7 жыл бұрын
or are there any other tires or exhausts you recommend?
@MudPuppyOffroad7 жыл бұрын
you def need a ,35% gr for those
@keepitdownsouth63097 жыл бұрын
FA Krispy my buddy runs them no problem no gr
@MudPuppyOffroad7 жыл бұрын
a 500 can do okay on 28 2s in some mud a 420 hell no geared too high. useless in anything but water
@CanAmXTP7 жыл бұрын
ha ha...boots little fucked up so I just electrical taped it! It's a Honda...it will run anywhere!!!
@corbinboyer1919 Жыл бұрын
Ever heard of water accumulating into crankcase vent
@MudPuppyOffroad Жыл бұрын
Yeah the factory vent setup is not great
@corbinboyer1919 Жыл бұрын
@@MudPuppyOffroad I ran mine up the snorkel and kept having water from moisture puddling inside my loops in the tube. Just ended up running up over my carb and back to the left side of my air box poking the filter
@4968Pete7 жыл бұрын
or I couldn't just watched this video lol
@hondaforlife12367 жыл бұрын
first
@CanAmXTP7 жыл бұрын
ha ha...boots little fucked up so I just electrical taped it! It's a Honda...it will run anywhere!!!