Honda 9005 LED DRL Daytime Running Light Install with Load Resistor
Рет қаралды 158,905
8 жыл бұрынUPDATE: The Auxbeam F16 9005 LED light does not require load resistors:
US: amzn.to/2kGfwnT
CDN: amzn.to/2nfnZ3G
If you need load resistors for 9005 bulb, you can buy this one
US: amzn.to/3paRPUU
CDN: amzn.to/30AHl6X
=======
** Watch new video on installing LED DRL without needing load resistors.
• Honda Odyssey LED DRL ...
=======
Shop Dial2Fast Store For List Of Tools & Parts
US: www.amazon.com/shop/dial2fast
CDN: www.amazon.ca/shop/dial2fast
=======
Support Dial2Fast on Paypal
www.paypal.me/Dial2Fast
Support Dial2Fast on Patreon
www.ptreon.com/dial2fast
Dial2Fast website
www.dial2fast.com
Like us on Facebook
/ dial2fastofficial
Shop Amazon
US: amzn.to/2LqTtuk
CDN: amzn.to/2L5QASt
Join Amazon Prime
US: amzn.to/31i05mP
CDN: amzn.to/3kG0D0R
Try Amazon Prime 30-Day Free Trial:
US: amzn.to/2S3GjHI
CDN: amzn.to/3kG0D0R
========
As an Amazon Associate, I earn commissions from qualifying purchases with the links provided here.
@reyk848 8 жыл бұрын
Great video as always! Love how detailed your videos are!
@tonyv1505 6 жыл бұрын
will this resister work on break rear strobe led light bulb? the reason why I'm asking is because I hear that without the resister these bulbs tend to burn out
@sunnnym4 7 жыл бұрын
hi i put hid on gem fog lights on honda odyssey and they worked for week and all of a sudden both of them stopped working, can you help of what to check ....please
@bigbuck762 7 жыл бұрын
I bought the same type LED headlights off eBay the problem I am having there's no difference between low beam and high beam on the brightness and the low beams cut out from time to time could this mean I need load resistors thank you
@spearius9059 4 жыл бұрын
I have an 05 Chevy Cavalier. I replaced my headlights with an LED bulb and the headlights function properly. However, once I switch to my daytime running lights (DRL), it then hyper flashes. Should I get the resistor or the Canbus decoder for my type of bulb instead?
@jake90770 8 жыл бұрын
Very informative thanks
@FleeGuy92 5 жыл бұрын
I’ve learned a lot from this video. Thanks a lot man!
@crazyviolent69 6 жыл бұрын
I wanna do the same thing to my s2000. It uses H1 bulbs but has drl so I need that load resistor
@rene1681 6 жыл бұрын
I love this I've been looking 4 a review like this for a while. This explains everything I wanna kno
@martinbasha1267 4 жыл бұрын
It’s not flickering a lot though, I’ve seen a lot worse. But my question is, is it okay to leave it as it is for ever? Is it going to affect negatively the car?
@ANTHONYNI33 7 жыл бұрын
hi i recently bought led headlight bulbs for my civic they work but as you drive they are not at bright as the factory halogen bulbs. you can barely see the ground. the seller claims load resistors would fix this and the would not be so dim. would you think load resistors would fix this?
@MrRangerZr1 8 жыл бұрын
On my 2010 Odyssey, I have the xenondepot 9005 led kit and I didn't need any resistors. It doesnt flicker or no DRL warning light. Still have my highbeams you lost your highbeams now with this particular led.
@rogerserafin 8 жыл бұрын
Gonna have to look into this. Did you also change out the 9006 main bulbs on your Ody ? I also have a 2010 Ody. Thx in advance.
@MrRangerZr1 8 жыл бұрын
+Roger S yeah i did xenondepots led kit is very high quality i highly recommend them
@angelguzman4955 7 жыл бұрын
MrRangerZr1 wat is xenon pot is that a difrent brand of leds
@musicpinas9935 6 жыл бұрын
Roger S
@SoundNationMusic 6 жыл бұрын
LASFIT led bulbs do the same thing, plug n play with no resistors or anything, built in fan for cooling.
@octaviosolano4615 3 жыл бұрын
I just one of DRL out. This upgrade will be ideal for me do on my ‘08 honda CR V. Thank you much! Your video will be helpful.
@iMotoTactic00L 5 жыл бұрын
Will this work on 06 accord with DRL and high beam.?
@philiphaverly4314 4 жыл бұрын
Thanks good explaining. is there a way to install LED daytime running lights that dim during the day but at night when you switch on the high-beam they go to full brightness. My 2010 Subaru with LED high beams during the day are running at full brightness. Is there some way to dim the LED bulbs during the day?
@chavreuil5533 3 ай бұрын
I know that was 3 years ago but i have the same issue on my kia forte did you manage to solve the issue?
@rogerserafin 8 жыл бұрын
It's really cool that you have the same Honda Ody as me, so it makes everything so much easier :) I used many of your videos and applied them to my own car. I'm gonna have to try this as well. I also changed out the factory bulb to a blue 9005 hallogen, but it still looked factory dim brown. Thank you for your videos and help. ~ Roger Serafin
@dial2fast 8 жыл бұрын
Thanks for your comment!
@waldomijangos49 7 жыл бұрын
I see flickering and is not from the camera, I did install led DRL on my corolla 12, and it does the same flickering, why is that?
@22wilove 2 жыл бұрын
Good video sir really helpful
@artyg1464 6 жыл бұрын
I got a 07 don't have drl how do I get them on it?
@franchisefred4066 2 жыл бұрын
Thanks alot. Just ordered those same resistors for $12 on eBay. Prices went up on everything now
@CharlesBridgTec 8 жыл бұрын
Nice job!
@dial2fast 8 жыл бұрын
+Charles BridgTec Thanks!
@jrsgarage7211 3 жыл бұрын
I have. 2006 sienna le whit halogen drl lights I tried to change them to led and won’t work! The high beam work perfectly! I use a resistor and nothing! Need help when I install one led and one halogen only the halogen turn on using drl!!
@brandonsample1 4 жыл бұрын
What kind of load resistors sis you use that has those connector peices
@claymeadows1702 7 жыл бұрын
Great video. The problem I'm having on my 07' Acura TL, is when changing to 9005 led bulbs, only one bulb will ignite. I can't get both bulbs to lite up. Do I need a load resistor for this problem too? THX
@ruthhernandez9403 2 жыл бұрын
Same issue I have right now
@chrisanthony144 7 ай бұрын
THanks for hte video bro! God BLess!
@fathutthekid1120 3 жыл бұрын
I tryed to put led lights in my 2007 Acura TL and 1 led bulb works wit stock bulb but doesn’t work with both led bulb?? Please help me out this is driving me crazy.
@MrTactiCALi 5 жыл бұрын
Do you need resistors for low and high beams?
@alinmatti786 7 жыл бұрын
will this work on acura tsx. high beam drl is 9005 .? .
@D4LM4R 5 жыл бұрын
Thanks
@themikeymikechannel2947 7 жыл бұрын
07 Bk/Luc , I need low and high beam bulbs @ 50w/low & 55w/high. who's got the best ones for cheap?
@chass5438 8 жыл бұрын
1rst : With my bright's switched on , they go off. I was thinking that load resistors may help this problem. I actually bought a new pair of these that are longer due to the fact that the ones I have from a couple of years ago are shorter and they don't go completely thru to the composites so it looks like only a "Dot" when you see them in a store window during the day. lol. 2nd: The new ones don't come on at all. I was going to return them as defective but this isn't the first time these have failed for this "Longer" style LED. This may also be a "Load" issue. I was going to try that and see what it does and if it would correct it before I returned them again. Load Resistors do correct other problems as well. I don't get an "Error" because my vehicle's a 2001. Any suggestions ?
@boricuaspr 7 жыл бұрын
Thank you for explaining PWM... I was going crazy to find out why my H7 LED DRLs were "pulsing" on a really fast rate while recording, but not noticeable to the naked eye. The set of LED I have do get very bright once you turn on the high beam and the "pulsing" stops. My only question is, would this pulsing damages the LED overtime? My set comes a very small ballast... BroView S7
@dial2fast 7 жыл бұрын
The pulsing will not damage LED.
@cix0606 7 жыл бұрын
hi how about may honda accord coupe i used led bulb hb3 and in the dashboard showing DRL ... should i used load resistor too/
@dial2fast 7 жыл бұрын
Please see my new updated video for DRL LED without load resistors. kzfaq.info/get/bejne/rttzadN2mpiVmYU.html
@THERIPPER216 6 жыл бұрын
I tried with my 06 accord and it didn’t work, same bulb not no resistor
@randyhawk 8 ай бұрын
is there any way I can covert headlights my Prius v 2013 to DRL as it does not have factory DRL headlights
@eddiewaters5445 5 жыл бұрын
Have you had any melting issues or fires? I have a similar setup where my front turn signals are also running lights. So I bought switchback bulbs that will be white when turn signal not in use and Amber when signaling. I see warnings not to use resistors on lights that will be on long. So will I have any fire hazards or melting issues if I use them for my lights and mount to metal surface?
@dial2fast 5 жыл бұрын
The load resistors will get very hot for DRL as they are running all the time. You need to securely mount the resistor heatsink to a metal surface to dissipate heat. The resistor itself will not catch on fire as they are rated to very high temp, but it must not contact other plastic pieces are wiring harness.
@alluvz2fish 5 жыл бұрын
I'd like to change out my headlamps to LED. Curious to know if I also need to add a load resistor?
@dial2fast 5 жыл бұрын
Here is the video of installing LED In low beam on Odyssey kzfaq.info/get/bejne/rttzadN2mpiVmYU.html
@watuzi 8 жыл бұрын
Can I use this 9005 LED for the low beam headlights on a Tahoe? The '05 Tahoe uses 9005 bulbs for low beam. Thanks
@dial2fast 8 жыл бұрын
+Edmund Mendez These LED are not bright enough for low beam use at night.
@miguelflores4306 8 ай бұрын
Nice video 👍
@ZeekerAdventures 2 жыл бұрын
The amazon page for the resistor says that it typically doesn't work for Japanese vehicles. Judging from the video, I'm assuming that's bs for hondas generally?
@latino4ever07 8 жыл бұрын
nice upgrade... can I install this on my 2005 Honda odyssey
@dial2fast 8 жыл бұрын
+alexander perez It should work the same.
@TLEE68 3 жыл бұрын
The high beam bulbs are hard to get a good hold and twist on my 06 odyssey, any suggestions one short of taking off the headlight assembly?
@Thankz4sharing 8 жыл бұрын
Thanks for the nice explanation of how Honda uses PWM to control running light brightness. Next, tell us why they put a 160MPH speedometer in the Odyssey! :-)
@MrPink2024 5 жыл бұрын
😂
@dennislau2227 7 жыл бұрын
Dr Fast, any tricks on how to reach the DRL? I've the same Odyssey as yours. Even on the left side w/o the PS reservoir's hindrance I still can't reach the DRL, and my hands are on the small side. Changed headlight and fogs into LED w/o an issue. Any ideas how you reach the DRL? Thanks
@jachobstikeleather3362 6 жыл бұрын
Do you need to install the canbus for the low beam headlights? 2004 honda accord.
@dial2fast 6 жыл бұрын
Take a look at this headlight bulb install I did. kzfaq.info/get/bejne/rttzadN2mpiVmYU.html
@winstonsaxonsdad 7 жыл бұрын
by any chance, can you leave a link for the Resistors? I bought some LED's to replace the DRL, Even though they are marked as 9005 they are round and don't have the right angle bend as the OEM lights have, There is plenty of room for the bulb but I can't get my hand in rotate them, especially on the passenger side. The right angle of the OEM 9005's allow a "handle" so to speak to twist the bulb into the socket. But there is no way for me to twist the round barrels of the replacement units. Local Honda dealer wants $40 for labor to swap them.... nice video!
@dial2fast 7 жыл бұрын
You should watch my latest DRL video using CAN BUS driver instead of load resistor and you maintain your high beam. kzfaq.info/get/bejne/b82DY7Vk0Jq7f2Q.html Some of these aftermarket bulbs are difficult to install, but you just have to take your time and try. If you still need to buy the load resistor, just search on Ebay and many sellers sell them. They are 50W 6 ohm resistors.
@davidmathews87 8 жыл бұрын
Whats that drill attachment for the tight spaces? Great video also, would like to do this.
@dial2fast 8 жыл бұрын
It's a Dewalt right angle driver. I have a video on it: kzfaq.info/get/bejne/oLZ7dcRizcucYH0.html
@davidmathews87 8 жыл бұрын
+dial2fast thanks, found one at home depot
@xLu7VaTiiCx 5 жыл бұрын
So I bought some high end Sylvania LED bulbs both high and low beam. I replaced factory halogen bulbs on my 2015 civic si sedan and the headlights look great, both high and low beam are working properly, my brights are working properly, the only thing that's strange is that my daytime running lights are still the factory halogen color. I have no idea how that possible since the DRL's come from the high beams, on my car. I called the place I got them and they said a few other people have ran into the problem and that basically they had no clue what was wrong. I don't understand how my bulbs would be outputting halogen light when I replaced all headlights and they are all working perfectly in LED. Please help if you can because I am so lost haha.
@elmerstree8179 4 жыл бұрын
Yo, how r u and the honda? Have u found this issue and how to fix it yet? I have a 12 civic, replaced o.g. bulbs with different halogens (high/low beams) Dell's are STILL PISSY YELLOW!!!! should I replace them all with LEDs????
@jchaka05 6 жыл бұрын
2012 accord did low beans and didnt turn on the headlights i put 9005 6000k and nothing but on the dash there was no light error
@gjamourifrancis9084 4 жыл бұрын
How did it work out for you?
@wc7484 7 жыл бұрын
would i be able to recreate this process but with the regular headlights (high and low beams) for my 2004 vw jetta?
@AlanTrades 4 жыл бұрын
The auxbeam light you said no resistors are needed, but in your description you put a link to resistors??
@dial2fast 4 жыл бұрын
Sorry, the links are confusing, since making this video, I installed the Auxbeam F16 LED light which did not require load resistors. That's the link listed. I have taken out the load resistor links. kzfaq.info/get/bejne/b82DY7Vk0Jq7f2Q.html
@gigi19mai1 6 жыл бұрын
I got some LED bulbs installed on my car but now I have no DRL. Mine are also running thru high beam. I also installed resistors but still no DRL. Do you know why?
@Willykamera 6 жыл бұрын
Emil Carlover you need to get low and high led b.
@johndeepfreeze8514 6 жыл бұрын
with drl, the voltage going to the bulb is lower.....around 6volts, so your led bulbs are not getting enough voltage to turn on
@blue1901 6 жыл бұрын
your explanation is funny mate... very simple explanation could have been perfect! LED uses DIODE which require a forward bias voltage to turn on and it is non dimmable. in my car it does dim, it depends on the brand your using.... and you could have used an OBDii to turn off the DRL instead of drilling holes in your car and putting a load on your car the resistors
@overlord6815 2 жыл бұрын
So if I replaced both sets of high beams and low beams with LED bulbs, I would need to buy 4 of these? And as long as the lights function properly is it fine to drive with the DRL light on?
@franchisefred4066 Жыл бұрын
You can pull the drl fuse to disable the light but the highs will still work
@overlord6815 Жыл бұрын
@@franchisefred4066 Thanks for that. My DRL light comes on an off so it doesnt really bother me.
@KlausSchneiderNp 8 жыл бұрын
nice vid , do you have a link for this in the Internet (where to buy the led)
@dial2fast 8 жыл бұрын
+Pyro Heart I have added the Ebay links in the description section.
@javiergarcia-hv5vs 4 жыл бұрын
Hi I already put on the resistor but my drl is still on. How can I fix this?
@romanrebisz4205 3 жыл бұрын
Hi I put ones on my 12 and I still have the DRL STILL ON
@ozziekuma 4 жыл бұрын
Do the DRL turn off when you turn on the low beam? Your video shows that the 9005 led is still on when you turned on the low beam headlights. The 9005 DRL are supposed to turn off when its dark out correct? Or when you manually turn on the low beam headlights the DRL automatically turn off. Correct?
@dial2fast 4 жыл бұрын
Turning on low beam headlight will turn off the DRL. In the video, I did not turn on the low beam, but instead I turned on the high beam light which on this Honda Odyssey will automatically turn on both the low and hi beam light. I did that to show how the DRL light will go to full brightness when high beam is on.
@ozziekuma 4 жыл бұрын
@@dial2fast ok thank you for your response and Awesome video sir.
@Jonathan-pr1wo 5 жыл бұрын
Hi I bought the same resistors you have and a led bulb for my drls on a acura tl 07 but when I plug one resistor the opposite light works that does not have a resistor and then when I plug in both resistors both bulbs do not light up but the resistors get hot which is weird because they are getting hot while no light output is given. Anyone able to help me out with this problem? I only worked on it for 30 minutes and gave up on it but will continue on it tomorrow.
@Jonathan-pr1wo 5 жыл бұрын
I tried the bulbs without resistors and just plugged them into the bulb sockst and they did not turn on. I know it’s not my bulbs because I seen them light up and plus they are brand new. I thought this
@masteraita 8 жыл бұрын
I have a 2015 Honda civic ex, I did the same thing, with a different decoder, and the DRL keeps coming on. any help???
@dial2fast 8 жыл бұрын
I know there are different decoders on the market. Some don't use resistor, but instead use a capacitor across the + and -. I am not sure what decoder the 15 Civic needs, but there is probably something out there that will work for it.
@masteraita 8 жыл бұрын
Well I know someone that has a 15, but it's an SI and they got the same one j did, however they're bulbs are different from mine. Would the bulb make a differemc, or the SI model?
@frededing4286 6 жыл бұрын
austin aita w
@pinoyeh 8 жыл бұрын
Use a LUX meter to measure the claimed 80watts.
@NightSociety 7 жыл бұрын
So the DRL is also a High Beam?
@SoundNationMusic 6 жыл бұрын
yeah, didnt know myself until i installed new led low beams and thought they were also high beams until i saw yellow when I turned on the high beams
@mrgio8381 8 жыл бұрын
these lds supports a 2006 Honda Odyssey?
@dial2fast 8 жыл бұрын
Yep, should be the same.
@sebastiancrabill444 7 жыл бұрын
were did u get the adaptor for the drill
@dial2fast 7 жыл бұрын
Home Depot
@justinyelverton 2 жыл бұрын
Hey man, are you still active here? I have a question.
@knowburtJ 2 жыл бұрын
Where did u buy the resistor kit
@dial2fast 2 жыл бұрын
See link in description.
@abhinavgaur13 8 ай бұрын
Hi. Would this turn on with ignition ?
@dial2fast 8 ай бұрын
DRL will turn on with ignition unless your parking brake is on when you start.
@bigcmcg3946 3 жыл бұрын
Why do they look like they are flickering still?
@John-bs5ug 7 ай бұрын
Because the LEDs are junk and they are indeed flickering!
@Ihaveadashcam 7 жыл бұрын
I installed led in DRL and now DRL doesn't work please help.
@JohnDoe-us1ek 5 жыл бұрын
“CarPro installs” lol
@johndavis-zr3hk 4 жыл бұрын
(Car Pro installs)nothing before watching KZfaq video’s and asking questions first
@franktorrez6356 Жыл бұрын
How did u fit ur hands
@dial2fast Жыл бұрын
It is very tight to get your hand in there. You might need to use a long needle nose pliers to help with removal. Be careful not to break the bulb.
@Lalambz Жыл бұрын
oh wtf! i didnt inow u had to use two for both 9005 lol! i used on 9006 and 9005 lol
@9363234 7 жыл бұрын
CAN i RUN THE led'S WITHOUT THE LOAD RESISTOR?
@semantinipassat8504 6 жыл бұрын
9363234 yes. ive done it 3 weeks no problem. just drl light in dash.
@THERIPPER216 6 жыл бұрын
InvisUser Tsal how did you do it I can’t get them to work without turning high beam pn
@THERIPPER216 6 жыл бұрын
On
@MrPink2024 5 жыл бұрын
3:24 I have a big *"LOAD"*
@ambassadorofcorruption3276 8 жыл бұрын
hb3 have 80 watt and drl must be 30 watt
@Bluesidian 3 жыл бұрын
That’s ok I’ll just ignore the ERL Lol
@franklinleung4253 5 жыл бұрын
what year is your Odyssey?
@dial2fast 5 жыл бұрын
2008
@keithplante1969 Жыл бұрын
Show the processbof the removal of the bulb lol
@roger3958 4 жыл бұрын
U must have baby hands. I can’t get the bulbs out.
@30jspecial 2 жыл бұрын
There is no way the halogens are brighter . I just replaced these and the LEDs are way brighter
@mblegend3056 5 жыл бұрын
The LED is way better.
@MikeApples103 7 жыл бұрын
And the resistor didn't come with screws because again you got a piece of 10$ trash off eBay m8.... you get what you pay for dude especially with car parts and eBay!
@mikethompson3534 3 жыл бұрын
What a piece of garbage , not worth the conversion, There are other bulbs out there which are plug and play with no modification
@MikeApples103 7 жыл бұрын
It's a "cosmetic" upgrade because you got the shittiest 10$ bulbs from eBay.... if you got real LED's they wouldn't suck, wouldn't be $5 each, and wouldn't have 12 5w LEDs. Use junk parts get junk results.
@juanacuna9031 7 жыл бұрын
I installed the led bulbs as high beams as well and it showed the DRL in the dashboard but the bulbs dont turn on in the daytime only when I turn on all my headlights at night. Will the load resistors fix that problem?
@dial2fast 7 жыл бұрын
The load resistor should fix the issue assuming the DRL was working to begin with.
@juanacuna9031 7 жыл бұрын
dial2fast yea because it didnt make sense to me that DRLs would only turn on when i turn my headlights on but thanks
@kacperkedzior2907 7 жыл бұрын
dial2fast same happens to me my drl only work when i turn on my highbeams. how do i fix that?
O'Reilly Auto Parts
Рет қаралды 174 М.
Xenon Depot
Рет қаралды 16 М.
Headlight Revolution
Рет қаралды 5 МЛН
Headlight Revolution
Рет қаралды 832 М.
Pinkfong en español - Canciones Infantiles
Рет қаралды 22 МЛН