Honda Odyssey LED DRL Install AUXBEAM F16 9005 LED

Рет қаралды 51,873

Күн бұрын

Auxbeam F-16 LED Light (9005)
US: amzn.to/3qXSoiJ
CDN: amzn.to/3pY700m
=========
In this video I will show you how to replaced the factory 9005 halogen bulb with LED light for the DRL.
=======
Shop Dial2Fast Store For List Of Tools & Parts
US: www.amazon.com/shop/dial2fast
CDN: www.amazon.ca/shop/dial2fast
=======
Support Dial2Fast on Paypal
www.paypal.me/Dial2Fast
Support Dial2Fast on Patreon
/ dial2fast
Dial2Fast website
www.dial2fast.com
Like us on Facebook
/ dial2fastofficial
Shop Amazon
US: amzn.to/2LqTtuk
CDN: amzn.to/2L5QASt
Join Amazon Prime 12 Months
amzn.to/31i05mP
Try Amazon Prime 30-Day Free Trial:
amzn.to/2S3GjHI
========
As an Amazon Associate, I earn commissions from qualifying purchases with the links provided here.

Пікірлер: 111

@Mr.Worf63 7 жыл бұрын

I installed the F16's on my 2016 Elantra GT for DRL / Highbeam . There H7's and not easy to install . However they offer great DRL light output and fabulous HighBeam light . I'm running Auxbeam the S4 series for Lowbeam , great light output !!

@losso__ Жыл бұрын

After watching your video, i just purchased these exact same lights for my 2014 Honda Odyssey. Got the warning on the dashboard.

@itsmesomeguy 3 жыл бұрын

I've been looking for hours to find something that might work ...thanks man

@angelguzman4955 5 жыл бұрын

Nice lights thank u for ur videos they are bright too

@henryphan6200 4 жыл бұрын

hi, I have tried on my 2018 mazda 3 and it works perfectly. I also have tried all other products from auxbeam but just only this product actually works on my car

@addmeons3701 5 жыл бұрын

The 9005 the sent me didnt have a ballast... just straight stock connector. And they done work..

@melisaesco1760 7 жыл бұрын

great review was worried about the warning light

@sganet_ 7 жыл бұрын

Very good review, thank you!

@dial2fast 7 жыл бұрын

Thanks for your comment!

@mohammedpatel7884 3 жыл бұрын

Hey buddy love the videos👍🏼 just wondering if these would work with a 2014 Honda Odyssey cause the ones I just installed are giving me a drl warning light

@samyuk2548 Жыл бұрын

Thank you for showing the video. I installed it to my 2017 Honda Odyssey. And still showing the DRL warning on the dashboard. Is there any solution?

@MrWill_H 3 жыл бұрын

Looks like you need to align the bulbs to the light housing. The LED chips should face left and right to get the optimum output.

@mif1965 7 жыл бұрын

I'm not sure why but installing these is really cumbersome!! There is no problem installing the low beam bulbs. But the two high beam/drl is difficult. I can't make the three groves match the socket and the right side bulb location behind the power steering reservoir makes it worst!

@mdkgod43 6 жыл бұрын

does this effect the cover, seems like the dust an moisture will get into the bulbs

@miker5044 5 жыл бұрын

Is the constant currant canbus driver replaceable mine is shorted out its poping my fuse immediately as soon as i turn it on even with the bulb removed

@jasonalexander6417 6 жыл бұрын

So could you use these for low beams and not worry about the load resistor?

@iTry2DiM 11 ай бұрын

Great video, do you think this will work on 2005 honda odyssey ex-l

@semantinipassat8504 6 жыл бұрын

Ive used some cheaper ebay decoder cable kit. Worked good for few days then the drl dash notification light came on flickering then stopped everything was ok, then again it flickered on/off/on/off etc. 1 week later left drl bulb topped working and few days later both stopped working. no power in inlet, tried oe bulb nothing, fuse is good. Is there a module somewhere that blew? 2011 acura rdx, checked behind glove box nothing. Where could it be located?

@rolandjacques649 7 жыл бұрын

Do you know what voltage you Odyssey DRL operate at? i'm trying to figure out if other LEDs can work as DRL's

@Osme79 6 жыл бұрын

Nice that's what I need

@zeazy164 5 жыл бұрын

Where did you shove your canbhs driver? Installing some 9012’s in my 2014 sierra.

@bdub6512 7 жыл бұрын

I still get the DRL error w/CANBUS on my 2011 Odyssey TE (w/HID). But it comes on after a driving a few miles. Any suggestions?

@andrewward4486 5 жыл бұрын

Im looking to do the same for my drl,how are your drl on ? My car and truck drl only come on when i shift it into drive

@sunnnym4 7 жыл бұрын

i have a 2007 honda odyssey and i do not have DRL system and i am trying to install the DRL system like you have done in your Nissan quest can you help me with how to do the diagram for honda odyssey 2007 .. please

@iMotoTactic00L 5 жыл бұрын

It will work on 2006 accord with high beam DRL?

@fortniteunleashed750 5 жыл бұрын

does this also solve problem for corolla 2013?

@isaiaheckert4429 5 жыл бұрын

The auxbeam f-16 does not come with a canbus driver. It comes with a constant current driver to avoid error

@mccraejoey82 7 жыл бұрын

what did you Mount the code resistor to?

@Rippseyy 7 жыл бұрын

Are these for 2014 honda accord sport?

@marcoabrigo8714 5 жыл бұрын

It this work for Honda Odyssey 2015 with out DRL ?

@ineedandrenaline 5 жыл бұрын

If I buy ones on Amazon that are CANBUS ready, I shouldn't have a problem right? Since it does say it will most likely not give an error code unlike non CANBUS LEDs

@davidmathews87 7 жыл бұрын

Thanks for the review, just kicking myself for buying the DRL leds mentioned a few months ago but haven't installed yet. Also your link to the auxbeam site does not include the drivers, although there is a listing on Amazon that does include for almost the same price.

@dial2fast 7 жыл бұрын

This F16 bulb comes with the driver. You can't connect it up without the driver.

@davidmathews87 7 жыл бұрын

dial2fast ok I'm just confused because the auxbeam site lists an optional driver add on. Also are there any issues using these in the reflector housing versus a projector one?

@GR8GUY54 7 жыл бұрын

David Mathews it comes with a driver. What you might have seen was their "error free" box that can connect as well in case your dash pops with errors. Put three sets of F16s on and they all come with the LED and driver as one unit.

@alinmatti786 7 жыл бұрын

ao this will work with any car with 9005. ? drl . high beam . ?

@vanjiny 6 жыл бұрын

Thank you for your video. I watched this and ordered the same led bulb for my 2007 odyssey. It is really difficult installing them. I installed driver side but I gave up passenger side one. I've tried about an hour. Could you tell me how to install it for passenger side? Thank you.

@gokusayayin8051 Жыл бұрын

Take the whole bumper off

@urielreyes750 5 жыл бұрын

Will this work for a 2015 honda civic DRL ?

@angelguzman4955 7 жыл бұрын

How bout some yellow fog lights like this those are nice by the way

@BillyMackDaddy Жыл бұрын

Great video. I got this item for 2016 Odyssey and it worked for the most part as you said. However, when the headlights are on and the DRL turns off, I see a dimmish flicker in the high beams. Did you get this too?

@dial2fast Жыл бұрын

I have seen that before.

@rolandjacques649 7 жыл бұрын

Do you know if these LED's interfere with FM or AM radio reception? i plain on putting this in my 2008 Odyssey i want better looking DRL thanks

@dial2fast 7 жыл бұрын

I only listen FM and no problem.

@joelgomez4616 3 жыл бұрын

It works for the Honda odessey 2011 DRL??

@johna.6725 7 жыл бұрын

hi there! did you have any issues on the brightness at night? do you think its blinding on coming vehicles?

@dial2fast 7 жыл бұрын

At night, once you turn on the headlight, the DRL turns off, so no problem blinding anyone.

@gochovin 6 жыл бұрын

Hi, I got both 9005 and 9006 to replace all four bulbs. Low beams where easy to replace but I tried for more than 2 hours to install the 9005 DLR and I couldn’t do it, what is the trick? I had to reinstall the old ones back, I have a 2009 Odyssey. Please help!! Thanks for your video!!

@gochovin 6 жыл бұрын

Actually I figured it out by watching another video for the same bulb type, the problem was the o-ring. The one that comes with the bulb is too thick, you need to use the one from the halogen bulbs.

@vaypet 7 жыл бұрын

how do you get the running lights out? This is the only part that is giving me trouble. I cant reach my hand, Im wondering if there is a good way to reach in there!

@dial2fast 7 жыл бұрын

It's a very tight fit behind there. I know it took me several tries. See if you can put plier on the back of the bulb and twist it.

@IBRUNO151 5 жыл бұрын

Hi great video help a lot :) i replaced mine as the hi snd low beam on my honda odyssey 2008 all works fine but DRL wont lit only hi beam i have the cambus no errors on my led i notice during instalation driver side completed LED lit omly when passager side still having old halogen also drl warning on my dash but when intalled led cn borh side no more drl message on my dash but nothing lit in drl mode hi beam works ? I thought relay or something with fuse all fine so re-installed old halogen and drl working fine why ??? Also Bought resistor kit but still the same result do you have an idea ? Thank you

@cremonam7936 5 жыл бұрын

@dail2fast hello mr i see u understand a lot about LED lights i have that problem whre my passenger bulb is not working, i tryed switching the bulbs but after the switch still the passenger side bulb is not working do u have any idea why could it be. thank you am runing vauxhall astra H

@dial2fast 5 жыл бұрын

If the light is not working, you need to find out 1) if there is voltage on the plug side, you need a multimeter to test for 12V on the positive and negative wires, 2) if there is no voltage, then you have to trace back the wire to find out if there is a cut or short in the wire, 3) if there is 12V, then check the physical connector to make sure the metal contacts have connectivity to the contacts on the bulb. You will have to isolate which part of the circuit it's not working.

@marcosaldana632 7 жыл бұрын

Would this kit work with other Cars? (2017 toyota 4runner), Would there be an issue with flickering? this is the main issue with the toyota 4 runner.

@dial2fast 7 жыл бұрын

Sorry, I don't have a 4runner to test out.

@niffysha 5 жыл бұрын

hey! How did you DIM the output of your High beams to run it as DRL's. I was under the impression that the DRLS run at full output like the high beams. thx

@dial2fast 5 жыл бұрын

Most DRL run at half the voltage

@billd4056 3 жыл бұрын

Some cars DRL's are on the low, some are on high.

@rigobertohernandez8496 7 жыл бұрын

I have maxima 05 problem slip tcsoff

@mdkgod43 6 жыл бұрын

What about parking lights

@cruzbsn1 6 жыл бұрын

Will this work as drl for Lexus GX460 without error on dash

@javivalle13 4 жыл бұрын

With these Auxbram bulbs the DRL will work in the Lexus like the SUV in this video?

@hawk362 6 жыл бұрын

Thank you for the video Bro. I have a question for you. Why there are some LED lights that looks clearer than others? For example, I seen some light that are crystal clear, you could see through the inside of the headlight. That Light that you are showing us is white but you can't see through the headlight. I hope you understand what I mean.

@dial2fast 6 жыл бұрын

That clarity is simply due to the age of the headlight lens cover. If the lens cover is oxidized and scratched or dirty, then it will look opague. My van is a 2008 and definitely has a haze on it. Will soon be reconditioning them for better clarity.

@hawk362 6 жыл бұрын

dial2fast Please, upload the video when you do so and thank you for your time.

@valentinrivas3078 4 жыл бұрын

I put them on my Honda Odyssey 2014 and I have drl light on the dash

@optimusprime3384 4 жыл бұрын

DRL LIGHT CAME UP ON MY 2016 TOURING ODESSEY BUT I WAS TOLD TO GET RESISTORS

@donziceman 2 жыл бұрын

I have a 2011 honday odyssey, will this work with mine? Also is there something more powerful for highbeam? Thanks a lot

@dial2fast 2 жыл бұрын

Yes this fits 2011 Odyssey

@donziceman 2 жыл бұрын

@@dial2fast thank you for replying.

@ozziekuma 5 жыл бұрын

I noticed in your video the drl lights are on and you're demonstrating the low and high beam funtions of the 9005 led bulb. thats great but why didnt you show in your video the drl's turning off, like they are suppose to, when the regular headlights (H11) are on? is that because they dont? when the H11's (headlights-low beam) are turned on (at night) the 9005(drl) are supposed to turn off automatically. Correct?

@dial2fast 5 жыл бұрын

All headlight function works as original. Just that it is using LED bulb.

@ozziekuma 5 жыл бұрын

@@dial2fast ok so my question is simple. Do those led drl lights turn off when the headlights (H11) turn on?

@jeremymoreside1444 3 жыл бұрын

Fyi. The collar on the bulb needs to be adjusted. The chips should be facing 3 o'clock and 9 o'clock so you're not blinding others and retain cutoff line

@kyangsable 6 жыл бұрын

Dang wished it worked on mine

@juanmanuelgraciasalinas2852 7 жыл бұрын

wath modelo for Nissan Quest 2004 please

@louieong8 6 жыл бұрын

Hello, when in DRL mode does it blind the incoming cars? do you get any driver complaint? thank you.

@dial2fast 6 жыл бұрын

The LED is brighter than the regular halogen, but during the day, I never had anyone flick the high beam on me. You do need to check your headlight alignment after installing this to make sure the beam pattern is aimed correctly.

@louieong8 6 жыл бұрын

Are they adjustable? what should be the beam pattern? 9 and 3? 10 and 4? thank you, really appreciate it for replying.

@dial2fast 6 жыл бұрын

The adjustment I am referring to is the headlight alignment on the factory headlight housing. Search youtube and there are tutorials on how to aim the headlight.

@louieong8 6 жыл бұрын

Thank you so much, Merry Christmas to you and your family!

@912443aaron 3 жыл бұрын

Does not work without flicker or error on my 2013

@Rockin_Roll 7 жыл бұрын

these bulbs appear to be exactly what I am looking for....can you answer a few question....? 1. Does the internal cooling fan make a lot of noise.....? 2. have you noticed any "Flickering" in either DRL *or* high beam mode...? 3. Is there a temperature rating....ie....5000K, 6000K....? Please let me know ............thank you.

@dial2fast 7 жыл бұрын

+justin case You can hear the fan if standing outside but you don't really hear it when you are in the car driving.

@Rockin_Roll 7 жыл бұрын

Hey, thanks for getting back to me...I watched this again, and when you were showing the Auxbeams against your garage wall....I noticed some flickering....(both sides, but mostly when the Passenger side was shining on your tool box....did you notice that as you were standing there...or perhaps it only shows in the video...? Perhaps there is an additional relay you can purchase to make the flickering go away? ALSO, how long have you had the Auxbeams installed....I'm wondering if the by using this configuration.....it might shorten the life expectancy of the bulbs...? ALSO, I asked a couple questions on the Auxbeam web site....and gave them my year, make and model... (2008 Honda Accord Coupe)...and told them That I wanted to use their F16 as a DRL....I got a response from some woman...who I don't think knew what I was talking about...but instead of "making a sale"....she told me to only use this bulb as a Highbeam....I'm thinking to myself...."it's the same bulb"...so she was no help......I think I found them best price....for 50 bucks on Amazon....thanks for your time...I appreciate it.

@josephortiz7138 7 жыл бұрын

Hey please someone can help me install led day light to my 2013 honda civic and the light drl was lit on the board what type of resistor i need to use the lights of my car are 9005 please help

@speakz26 5 жыл бұрын

Did you fixed this problem?

@biancavargas4576 5 жыл бұрын

@@speakz26 I have the same problem, do you have a solution?

@Phil-D83 5 жыл бұрын

Auxbeams dont work properly in my Toyota 9005 system. They flicker in lowbeam mode

@ivandeeterrible8037 5 жыл бұрын

From what I’ve read and seen from other people you’re supposed to aligned the led bulb in a 9-5 position once inside the headlight.. looked like you had it different in both your headlights

@fh7804 4 жыл бұрын

What application do I need for 2013 Honda Ridgeline? H11 ?

@dial2fast 4 жыл бұрын

Please see this video: kzfaq.info/get/bejne/hN-CdKeKmL2omGQ.html

@fh7804 4 жыл бұрын

dial2fast hb3 9005 same as in your video thanks again!

@xryokaii 7 жыл бұрын

Hi dial2fast, So I have these lights installed and I think they are really bright. Is there anything I can do to dim it so it's not as bright? Thanks

@romanrebisz4205 3 жыл бұрын

Hi will this work with 2012 odyssey

@romanrebisz4205 3 жыл бұрын

They don’t make them anymore

@kaimanson3174 3 жыл бұрын

U can find it in amazon under a different brand.. it Should work

@brineshwarrambali6716 7 жыл бұрын

Can it work on a 2013 civic

@dial2fast 7 жыл бұрын

It should work fine.

@kacperkedzior2907 7 жыл бұрын

dial2fast quick question. i installed led drl but they only work when i put the highbeam on. any idea how to fix that?

@alexbird2942 6 жыл бұрын

What year is your odyssey that you did this on? I’m getting these to install on a 2015 odyssey.

@dial2fast 6 жыл бұрын

2008 which is model run up to 2010. Your model should have same bulb.

@alexbird2942 6 жыл бұрын

So do you think I will have the DRL error issue?

@dial2fast 6 жыл бұрын

Alex Bird Most Hondas / Acura will report DRL error if it does not see a proper load (light bulb).

@alexbird2942 6 жыл бұрын

dial2fast Yeah, that’s what I was hoping to avoid. Since you didn’t have that error, I was hoping mine would do that same thing.

@alexbird2942 6 жыл бұрын

I wanted to thank you for your hope. This specific bulb with a 2015 Odyssey EL-X does not trigger the DRL warning on the dash. *celebrate*

@ammarselo Жыл бұрын

Those are flickering. I haven't seen any 9005 high/low that does not flicker. installing an anti-flicker adapter will solve the problem, but eventually the DRL will become as bright as the high beam, which is a deal breaker for me.

@brineshwarrambali6716 7 жыл бұрын

H11