Honda Accord Stoplight Switch Replacement

Рет қаралды 43,895

5 жыл бұрын

Watch for helpful tips on replacing the Stoplight Switch on a Honda Accord.
Level of difficulty: Intermediate
Approximate time: 1/2 Hour
Vehicle used: 2010 Honda Accord 3.5 Liter
Tools needed: straight blade screwdriver
To learn more, visit www.StandardBrand.com
Motorist: If this job is beyond your skill level, visit your automotive service professional.This video is for general information purposes only. The provider makes no representations or warranties as to the information contained in this video or its usage, completeness, quality or accuracy. Any use of such information is at the user's sole risk, and in no event shall the provider be liable for any consequential, incidental, special, punitive or direct or indirect damages arising from such use.

Пікірлер: 17

@iplahalo Жыл бұрын

This helped a ton. I simply replaced the switch on my Honda Ridgeline, but inserted it to full depth. This was causing my brake pedal to not fully return, causing my brakes to drag while driving. I thought the corrugated ridges were for depth adjustment, but I didn’t see logical confirmation that I wasn’t supposed to insert the switch ALL the way in. Thanks a ton.

@jerrellhoggard6599 21 сағат бұрын

My stop light is on but won't light up when I depress the brake pedal?????

@markopolo4851 Жыл бұрын

I need to know how to take the cover off

@CarlosGarcia-di7do 3 жыл бұрын

This is awesome. Showed me how i could actually adjust the depth of the switch to make contact with the brake pedals bump stop. I bought a new one for $8.99 from AutoZone, my trusted parts hub; and that switch vs my switch both tested out perfectly. The real problem was the piece that was on the pedals frame itself. I rigged up a solution for that of an o-ring that fit perfectly & this man right here showed that it actually adjusts according to the pedals setting in place. Great solution. Thank you

@holy_lettuce 11 ай бұрын

Ok so that part is what’s broken on mine as well, what did you do to replace the O-ring? I know this is 2 years later

@luvyu6102 4 ай бұрын

Very clear and responsible description.

@KEVL5050 Жыл бұрын

How did you replace the retainer clip

@HermeticSuperstars 2 жыл бұрын

Perfect!

@kmst1962 3 жыл бұрын

thank you so much

@TheAnonymousDipper 2 ай бұрын

Does this address any issues with the push to start, start stop switch?

@TrippinWithTodd 2 жыл бұрын

You didn't show how to got the retainer clip out. What is the secret? I tried to pop mine out with a screwdriver, but it doesn't just pop out as you say.

@thesportsjunkie4827 Жыл бұрын

I was waiting for that part also

@luvyu6102 4 ай бұрын

very easy, just use an adjustable plier.@@thesportsjunkie4827

@remmsterr 3 ай бұрын

I’m confused too.

@Mad-productions.Jay. Ай бұрын

It's just a little tighter then you think. Gotta throw your purse at it a little

@gettingstarted7075 7 ай бұрын

What wire send power after the pedal is pressed

@jadenramos2522 3 жыл бұрын

Switched it on my 2014 accord but my car takes two to three tries before it cranks . Also, when I’m driving my emergency brake feels like it is on. If I don’t hit the gas my car will come to a complete stop with pushing the brakes .