Honda Accord Thermostat Housing Replacement with Basic Hand Tools

Рет қаралды 55,668

6 жыл бұрын

Thermostat housing replacement with basic hand tools. This specific vehicle is a 2003 Honda Accord, part Honda 19320-RAA-A02.
►Subscribe: / carsntoys
►► Tools: www.amazon.com/shop/carsntoys
►► Thermostat Housing: amzn.to/3cSgOn6
►►► Our most helpful videos (One million + playlist):
• 1 Million Views Playlist
Note:
Any attempt to repair automotive parts and/or systems carries risk of personal injury. Always adhere and follow safe practices when working on vehicles. Such as, safety glasses, jack stands, no loose clothing, etc. No guarantee or warranty is implied. Use the information in this video at your own risk. Carsntoys is a member of the Amazon Influencer Program.
Publication, reproduction or distribution of this film is strictly prohibited.
Carsntoys
/ carsntoys

Пікірлер: 51

@hawaiiknifeandgear5531 3 жыл бұрын

This same job on a 2004 CRV (along with water pump and power steering pump replacements) has taken me two straight nights. There is no room to work, and the entire front of the car has to come off. The metal pipe into the housing is the same setup, and I've been stumped for a while trying to remove it. Thanks for the view I needed!

@capnmatt41 4 жыл бұрын

I needed this vid to figure out how to get that metal pipe out of the housing. Snug Bunny! Thanks man!

@drewb5738 4 жыл бұрын

Thanks for making this. Exactly the part I needed to replace.

@CarsNToys 4 жыл бұрын

Glad to help!

@arthurfricchione8119 4 жыл бұрын

Wow great video. I just changed the radiator hoses and thermostat on my wife’s 99 Accord EXL with 60000 miles just for the heck of it. They were original hoses but I changed just because of age. The thermostat housing is metal though. Never saw plastic before. The hoses were original but in excellent condition. Anyway great video. Artie 👍👍👍

@CarsNToys 4 жыл бұрын

Awesome!

@chowder366 2 жыл бұрын

Thank fir showing the metal pipe !!!

@bigdoghernandez6479 2 жыл бұрын

I did it thank you 👍

@supersalezovlogs5923 3 жыл бұрын

Hell yea bless u

@donjuanob 5 жыл бұрын

Honda dealership just tried to charge me 867.00 to change thermostat casing their tech broke while changing my starter 2 weeks ago....thanks for your video cause i knew he done it when he replaced starter...

@CarsNToys 5 жыл бұрын

Glad to help.

@luiscruz9307 5 жыл бұрын

What kind of gasket do i buy to put on the housing? Thanks

@VinnieVega76 4 жыл бұрын

I had to replace my vtec solenoid and had to pull the housing from the side. Now i have the problem of trying to get the housing onto the pipe because the o ring on the neck won't stay in place. Also my thermostat housing only has 2 12mm bolts not 3. Any suggestions?

@bigdoghernandez6479 2 жыл бұрын

I have a 2005 Honda Accord squirting water from behind intake manifold but after watching Video I seen that housing has a secondary hose that runs by inner intake manifold I believe we’re my leak is at great video only one I found with my issue. Bad news for me I have to remove intake manifold.there a pain

@josh___3846 5 жыл бұрын

the level of visual detail you give is unparalleled.

@CarsNToys 5 жыл бұрын

Thank you. Glad to help.

@bigdoghernandez6479 2 жыл бұрын

It’s called a bypass hose do you have any videos on how to replace that hose 2005 Honda Accord? 2 videos out yours and 1 A auto

@vonix1565 Жыл бұрын

The head on my top bolt is stripped any tips to remove?

@gmotagking Жыл бұрын

any tips on taking of the housing with out breaking it? LOL its so hard to come offffff, im close to just calling a mechanic and having them do it lol

@smanueldacevedo 13 күн бұрын

What size is are the scond set of bolts?

@mariosegura6282 3 жыл бұрын

It seems like an oldie but it’s a goodie. My 08 si is leaking coolant from the thermostat housing. I might be able to get away with just replacing the gaskets but I’m thinking of just replacing the whole thing. Any suggestions?

@jamessmriga6999 2 жыл бұрын

I have the same question. What did you end up doing?

@mariosegura6282 2 жыл бұрын

@@jamessmriga6999 I replaced the housing it was a tricky area but not so so hard

@bigdoghernandez6479 2 жыл бұрын

Does anyone no we’re that bypass hose go two

@mdb831 4 жыл бұрын

I have a 2010 and I need the metal tube as well. FML

@javierpnd3625 Жыл бұрын

Ese tubo siempre entra flojo ?

@hiitsmartin 4 жыл бұрын

Do you need to bleed the system after changing thermostat?

@shamilsons 4 жыл бұрын

Yes the system must be bled in order to replace the thermostat

@davehofferbert7416 4 жыл бұрын

Is that manifold easy to take off and put back on?

@CarsNToys 4 жыл бұрын

It's not too bad - kzfaq.info/get/bejne/kN-Co7xi3tXXdac.html

@felipesilvausa 4 жыл бұрын

I did this job took me 2 hours removed intake and starting motor put wd40 on that oil ring metal pipe went in back very easy did everything from the top those two 10 millimeters screws on the back of the housing are very hard but take your time

@vanessat.pittman5340 3 жыл бұрын

I’m on my second time repairing this housing on base RSX - what would be the reason for this ? Like the cause of death to the housing would be what? It’ll last a month I’m thinking before it cracks again smh

@rickjames9477 7 ай бұрын

Buying aftermarket housings?

@DMAC3118 5 жыл бұрын

What is the name of the metal hose sitting in the thermostat housing

@CarsNToys 5 жыл бұрын

Connecting pipe :-)

@jamessmriga6999 4 жыл бұрын

Do you recall the Honda part number?

@CarsNToys 4 жыл бұрын

This site helps. Just choose your specific model and you'll find any part and the corresponding part number - www.hondafactoryparts.com/

@albertolopez8498 3 жыл бұрын

En español por favor

@attygarland6909 5 жыл бұрын

I don't understand why so many car manufacturers decided to put the whole thermostat assembly so close to the fan belt and alternator. Any leak that springs out of that assembly will drench the fan belt and get into the alternator, causing more havoc that will need to be repaired. Grrrr!

@CarsNToys 5 жыл бұрын

That's a very good point. Hopefully it doesn't leak! **fingers crossed**

@bryanmartinez6600 5 жыл бұрын

Hey but my Titan has it at the lowest point possible so if I ever have to cross deep water my alternator is now water-cooled.

@zoneb609 4 жыл бұрын

Nothing will happen if coolant leaks onto an alternator.

@spawnandbatman6975 5 жыл бұрын

Damn that's a crappy spot for honda to put a thermostat. You gotta pull back the intake manifold. cant remember what it is. But did you pull that back for easier access

@CarsNToys 5 жыл бұрын

The housing is in a tough spot. But if you were to replace the thermostat only, it isn't too bad. Just remove the lower radiator hose clip and it's right there.

@dreday7590 5 жыл бұрын

Found out the hard way that the thermostat for 50 buxs is fine its this piece behind it leakn

@stevenlackey5993 Жыл бұрын

What is that piece called? Asked the guy at auto zone for thermostat housing and he gave me a thermostat.

@xcorpio17 2 күн бұрын

There is no way to get one of the bolt off

@MPAutomotiveCrafts 4 жыл бұрын

Stupid pipe keeps leaking...

@variobro5922 4 жыл бұрын

reusing those clamps, tsk tsk.

@attackroflchopter4403 4 жыл бұрын

It'll be aight. Those clamps have one job.

@attackroflchopter4403 4 жыл бұрын

@Victor Y. I must be lucky, ive been wrenching as honda for a little over 20 years, they have worked great for me. They are getting harder to compress as hondas have gotten more cramped under the hood though. I find myself wanting to change them out with the screw type.