Honda CB750 K2 - triple clamp replacement

Рет қаралды 3,678

2 жыл бұрын

Well.....it's been a while, but now the last of the parts are in hand we can get back to ''Project CB750''. It's time to remove the old triple clamp, take a look why it may have failed & fit the new, Genuine Honda, item.
In the video we cover swapping over the clocks, fitting the headlight mounts - no simple task given the info in the Honda Service Manual!
It's slow progress, often the case with old project bikes, but at least we are now going in the right direction!
Check out all the previous Episodes in this Series plus there will be a few more videos on this bike in the future...
Enjoy
Andy
Now remember, you can get your dirty hands on the new Andy Mechanic Merchandise through the new Andy Mechanic Zazzle store, just click on the link below:
www.zazzle.co.nz/store/andyme...
Also, if you’re keen to get an embroidered work shirt or jacket then visit:
andymechanic.uniformnz.com/
Both Zazzle & UniformNZ can ship to anywhere in the World so if you are far far away then just email them for a quote.
You can also become a Patron to the Andy Mechanic KZfaq channel. Patrons get special access to up and coming projects, future info about the channel & of course background info on the Tool Girls too! Here’s a link:
www.patreon.com/Andymechanic
If you'd like to send something through by post - a letter to be read out in the 'Mail Call' videos or maybe a parcel containing a surprise for your favorite Tool Girl, maybe a new tool for us to use in a video or a KZfaq channel sticker for the cabinet door or toolbox then you can send it here:
Andy Mechanic KZfaq channel
PO Box 6265
Victoria Street West
Auckland
Post Code 1142
New Zealand
You'll be sure to get a shout out on one of the videos too!
….or just flick me an email: andymechanic@live.co.uk
Oh…and here’s Tool Girl Lilli’s web site, that’s right, Lilli has her very own web site! Damn….
www.lillisteele.com
Thanks for all your support, until next time...
Andy

Пікірлер: 27

@brmelectric 2 жыл бұрын

Great video. I agree, those crappy homemade washers have to go.

@daveco1270 2 жыл бұрын

That D washer should be 2mm's thick according to one of my CB750 books. That's the earlier "unicorn" triple tree. Harder to find and more expensive than the later year 750's. Ive been looking for a video to explain how the fork gator goes onto the bottom of that head light fork ear. So glad you made this video. Now I know.

@AndyMechanic 2 жыл бұрын

Hi Dave, many thanks for the info on the washer thickness, very much appreciated - I'll cover this in the next video :-) Really appreciate your feedback Cheers Andy

@jondwyer3037 2 жыл бұрын

Ay up Andy, youve done it again with another great video, 12/10.

@AndyMechanic 2 жыл бұрын

Thanks John :-)

@moystonadv3651 2 жыл бұрын

mine did the same......bummer !

@johnnuttall6112 2 жыл бұрын

the flat on that D washer needs more taking off i think its binding on the fork tube and bolt andy liking the vid

@AndyMechanic 2 жыл бұрын

Hi John, yes you are correct. I had a much better view of what was going on when I was editing up the video. I'll be sure to be replacing these washers with some of the correct dimensions at the next stage of the build. Really appreciate all your help Cheers Andy

@simonrawle7885 2 жыл бұрын

about time you get back on to it lol . happened to end up in thomas bakers on monday . good your rite dam good sausage rolls

@AndyMechanic 2 жыл бұрын

Haha....lmao :-)

@simonrawle7885 2 жыл бұрын

@@AndyMechanic supplementary information for the 750 f with toque if you want that sent over

@AndyMechanic 2 жыл бұрын

Yes please Simon :-)

@harryburford6629 2 жыл бұрын

cool

@daveco1270 2 жыл бұрын

In my CB750 Clymers manual there's some torque specs but I don't see top triple tree fork holders listed. It does list "fork top bridge to front fork" and "front fork bottom bridge." Could those be upper and lower triple tree...or are they referring to something else? It has them at 13 to 17 ft pounds of torque. Nowhere near what you referenced.

@bobkinney2430 2 жыл бұрын

Interesting, I never has that issue on my CB500......it must have been exclusive to the CB750.

@harryburford6629 2 жыл бұрын

could u tig weld that back up or would it expand and to contract to much

@AndyMechanic 2 жыл бұрын

Definitely not. Here in New Zealand it's illegal to repair or modify a steering/suspension component. Besides, this is a rather important component on the bike & failure could likely cause serious injury or death... Cheers Andy

@digschopper9321 2 жыл бұрын

Would a K4 triple clamp have that same weakness? They still have D washers.

@AndyMechanic 2 жыл бұрын

Most likely if they are still using the washers...maybe the forums can confirm Cheers Andy

@alanjaldred 2 жыл бұрын

Nice :) Pretty dissapointing of the part supplier to make such a rookie paint job. You would think for such an expensive part, they would properly plug the screw holes for painting!

@AndyMechanic 2 жыл бұрын

Yes, I agree. Not impressed either given the cost & well....Honda? Cheers Andy

@johncrowley5612 10 ай бұрын

That doesn't look like a genuine Honda part. Should be a satin finish and Honda would have masked the threads.

@AndyMechanic 10 ай бұрын

Correct, the replacement is not a Genuine Honda part. Cheers Andy