Honda Civic ECU Chip Tuning GS2 Box '😵Whats inside!' +OBD2 Bluetooth Fault Code Reader

Рет қаралды 5,172

Жыл бұрын

/ @grooveon #diagnostictools #hondacivic #obd2scanner
Following on from my installation video for the ECU ChipPower GS2 module, and adjustment video, today curiosity got the better of me and I decided to open up the unit ti see how it works and whats inside !
Also covered is reading fault codes with OBD2 bluetooth adaptor and how to clear codes.
GrooveOn Amazon Store: www.amazon.co.uk/shop/grooveon
(I get a small commission to help make my videos, but the items do not cost you anymore)
Product Listing for GS2 Chip Tuning available on Amazon here: amzn.to/3SsvYUf
OBD2 - Bluetooth code reader used: amzn.to/3PGjTwv
OBD2 - Mini Bluetooth code reader: amzn.to/3Xubpup
Software used for OBD2 Bluetooth code reader was 'Torque' on Android and iPhone.
Full installation for the ChipPower module is here:
• ECU ChipPower GS2 Inst...
Overall I felt the GS2 gave the car less lag in power, you were able to pull away even if not in the optimal gear. There was a smoothness and fluidness between gear changes and the pick up was improved too.
Adjustment is via the screw on the front of the unit, of which you turn counter clock wise 4-6 turns up to a maximum of 24 turns.
Disclaimer:
This video is for information and guide purposes only and cannot guarantee against improper use or unauthorised modifications of this information. I assume no liability for damage or injury incurred as a result of any of the information contained in this video. I recommends safe practices when working on vehicles using correct PPE, equipment and processes. Take care and thanks for watching. / @grooveon I really hope my content helped you, 'Super Thanks' is available by clicking the button under the video thanks so much ! ❤️
Alternatively, you can just buy me a ''thankyou'' coffee!: ko-fi.com/grooveon

Пікірлер: 17

@circlemunozramirez8266 8 ай бұрын

Thanks for your video. I am thinking about this its good to know it works and the code issue. By connection and the code, looks the module is faking the air temp. to the ECU to giving more fuel for the power.

@xmadmikey1994xGaming 3 ай бұрын

Very useful information :) also nice car I’m a civic driver myself 😃

@GrooveOn 3 ай бұрын

Thanks mate

@TheAncientMarinersBlog 7 ай бұрын

I just installed one of these GS2 boxes in my Peugeot RCZ 1.6 Petrol and, after 200 miles and with no screwdriver adjustments, I am very favourably impressed. The car may, possibly, be a bit quicker through the gears, but it is definitely much smoother (especially up to 2500 rpm) and fuel economy appears to be about 5mpg better on a motorway run at 60mph. You are not going to shake the earth for £81, but I would certainly recommend this unit as a simple, cost effective and refreshingly impressive upgrade on a mid-range car

@GrooveOn 6 ай бұрын

yep those are my thoughts too, nice one !

@No.Handle31 Ай бұрын

I have a 1.4 T Hyundai I30 I don't want extra power not fussed but all I want is the take off to be smoother. Is it worth getting one of these units for my car?

@dash2001imi 4 ай бұрын

Could you maybe do a 0-60 to see the difference in performance with the chip?

@No.Handle31 2 ай бұрын

Need to make my car a bit better in driveabilty i dont want flat out power just snoother. Is this worth it?

@hytear Жыл бұрын

Based on your experience with this "Chip Tuning GS2" box, do you recommend it ?

@GrooveOn Жыл бұрын

I still think it makes a difference, if I unplug it and go back to stick it seems sluggish

11 ай бұрын

I got 2 of those OBD2 devices and never made any of them read anything of my 07 Civic. Is there any trick about the connection or protocol that must be setup? I mean, the phone can see the OBD2 device, it just never talks to the car for some reason.

@GrooveOn 11 ай бұрын

I know what you mean. What I find works is plug in the OBD2, then go to Bluetooth on your phone and find the device, it may not be obvious just search for new device, then connect. It won't show connected on phone, but go to the app for your OBD2 ( I use torque) and make sure your connection settings are set for a Bluetooth device

11 ай бұрын

@@GrooveOn Thank you. I will try again later today and I’ll get back to you. And thank you for the videos, they are really helpful.

10 ай бұрын

@@GrooveOn Just letting you know that it worked. Thank you so much.

@GrooveOn 10 ай бұрын

@ that's great news, well done you!!

@AndreiGheorghe-df3wl 4 күн бұрын

kzfaq.info/get/bejne/qNiphNOnuZnWh40.html the wires go straight , not through the chip unit, watch minute 16:40 , only power and the values that were supposed to be tuned bypass the unit and remain the same:)))) save your money fellas

@Rob-st5ll 6 ай бұрын

Totally fake. If you open up the wire harness, you will see only the red and black wires go to the unit So power going in, but nothing coming out., SCAMMM