Honda Civic Front Strut Replacement 2006 (2006-2011 Similar)

Рет қаралды 202,526

5 жыл бұрын

In this video I show you how I replace the front struts on a 2006 Honda Civic. The procedure is the same on each side but the part numbers are different. 2006-2011 Civics should be similar. The exact vehicle in this video is a 2006 Honda Civic EX sedan.
Be sure to subscribe for more tool and car repair videos!
/ bigdog50001
Buy Big Dog50001 T-Shirts, coffee mugs and other gear here!
bigdog50001automotive.mysprea...
/ bigdog50001
/ bigdog50001
The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog500... (As an Amazon Associate I earn from qualifying purchases).
Disclosure: This channel earns a small commission using some of these links - at no additional cost to you.
Tools and Parts:
KYB Strut ONLY (Front Left): amzn.to/2NaRPlx
COMPLETE KYB Strut Assembly (Front Left): amzn.to/2QgoYPg
KYB Strut ONLY (Front Right): amzn.to/2NbFops
COMPLETE KYB Strut Assembly (Front Right): amzn.to/32GgRfQ
Daytona Jack (Cheaper at HF with Coupon): amzn.to/2LtHfUP
Jack Stands (Cheaper at HF with Coupon): amzn.to/2LLWSWr
MIlwaukee 3/8" Impact Wrench: amzn.to/2LRwryu
Sunex 3/8" Impact Sockets: amzn.to/2NXij9O
My Favorite Small Screwdriver: amzn.to/2Lv0HAp
GearWrench Ratchets: amzn.to/2Nc1YOJ
GearWrench Sockets: amzn.to/2NYlr5m
Milwaukee M12 3/8" Cordless Ratchet: amzn.to/2NT7KEG
Branick Professional Spring Compressor: amzn.to/2Nbdl9K
Snap-On Torque Wrench: bit.ly/2TzsaU0
GearWrench Metric Wrenches: amzn.to/2LQ4Rle
Neiko long hex sockets: amzn.to/2N9Acm0
Craftsman pass through socket set: amzn.to/2LsKyvn
Upper strut mounting nuts Honda part # 90304-S10-024
Lower strut bolts Honda part # 90190-SNA-000
Lower strut nuts Honda part # 90213-SR3-013
Want a free Big Dog50001 sticker? Send an email to bigdog50001@gmail.com requesting a sticker. Sorry, no international addresses.
Have something you would like to send to Big Dog50001?
Send it here:
Big Dog50001 Automotive Channel
P.O. Box 726
Cortaro, AZ 85652
2018 Epidemic Entertainment. All rights reserved.
Disclaimer:
Due to factors beyond the control of the Big Dog50001 Automotive Channel, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. The Big Dog50001 Automotive Channel assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
The Big Dog50001 Automotive Channel recommends safe practices when working with power tools, in on or around automobiles or other vehicles, automotive lifts, lifting tools, jack stands, electrical equipment, automotive modules and systems, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.
Due to factors beyond the control of the Big Dog50001 Automotive Channel, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not the Big Dog50001 Automotive Channel.

Пікірлер: 285

@BigDog50001 5 жыл бұрын

*Tools and Parts* This channel earns a small commission using some of these links - at no additional cost to you. KYB Strut ONLY (Front Left): amzn.to/2NaRPlx COMPLETE KYB Strut Assembly (Front Left): amzn.to/2QgoYPg KYB Strut ONLY (Front Right): amzn.to/2NbFops COMPLETE KYB Strut Assembly (Front Right): amzn.to/32GgRfQ Daytona Jack (Cheaper at HF with Coupon): amzn.to/2LtHfUP Jack Stands (Cheaper at HF with Coupon): amzn.to/2LLWSWr MIlwaukee 3/8" Impact Wrench: amzn.to/2LRwryu Sunex 3/8" Impact Sockets: amzn.to/2NXij9O My Favorite Small Screwdriver: amzn.to/2Lv0HAp GearWrench Ratchets: amzn.to/2Nc1YOJ GearWrench Sockets: amzn.to/2NYlr5m Milwaukee M12 3/8" Cordless Ratchet: amzn.to/2NT7KEG Branick Professional Spring Compressor: amzn.to/2Nbdl9K Snap-On Torque Wrench: bit.ly/2TzsaU0 GearWrench Metric Wrenches: amzn.to/2LQ4Rle Neiko long hex sockets: amzn.to/2N9Acm0 Craftsman pass through socket set: amzn.to/2LsKyvn Upper strut mounting nuts Honda part # 90304-S10-024 Lower strut bolts Honda part # 90190-SNA-000 Lower strut nuts Honda part # 90213-SR3-013 The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog50001automotive

@tahjo7 2 жыл бұрын

Sadly, after doing this job, got an alignment, and it slightly pulled to the right. 3 alignments later, same results. Did some searches, it's a prevalent issue, lots of reports, no solid answers.

@wyattoneable 5 жыл бұрын

Man I'm loving your options in tools. I like that Craftsman socket and ratchet set. Anyone who owns a car like that and wants to tackle this job now has a complete set of video instructions. Nice work.

@BigDog50001 5 жыл бұрын

I know, I know, I have a tool problem lol! Thanks for the comment Wyatt!

@Longtrailside 5 жыл бұрын

As we all do..lol.

@h4l121 5 жыл бұрын

Its amazing how clean, organized, and thorough you are in your videos. You deserve WAY more subscribers!! Ill make sure to spread the word.

@BigDog50001 5 жыл бұрын

Thanks, I appreciate it!

@a7mad421 5 жыл бұрын

Just wanna say thank you for this video. Just finished replacing the struts on mine.

@BigDog50001 5 жыл бұрын

Thanks for the comment!

@hectord7154 4 жыл бұрын

Thank you for posting these, I’m subscribed now , I own a ‘07 civic and ran into your channel while searching for videos on front strut replacement. Very well detailed and clear video. Much praise from me

@BigDog50001 4 жыл бұрын

Thanks for the comment and welcome!

@pavanmari7453 3 жыл бұрын

The reason I like watching your videos compared to other DIY’ers is that you are concise to the point and thorough job. Well done sir. I have ordered some parts through your links to say my thanks!

@BigDog50001 3 жыл бұрын

Thank you, I appreciate the support!

@subzuru 5 жыл бұрын

Really great quality video and you didn't miss out on a single detail. I appreciate the hard work, thanks!

@BigDog50001 5 жыл бұрын

Thanks!

@ranjdall 5 жыл бұрын

Such a well done video, you just saved me so many unforeseen headaches and I haven’t even started.

@BigDog50001 5 жыл бұрын

Thank you, a lot of work goes into making a video in addition to the work necessary for the repair, I appreciate the comment!

@thecordlesscarpenter7956 4 жыл бұрын

Thanks for the video brother, clean and simple! For those that don't know, auto parts store usually have spring compressors to rent that work also... just did it. Easy peasy, super quick maintenance.

@thecordlesscarpenter7956 4 жыл бұрын

Also, for installing the piston nut on top (you know, the one you MUST replace (before releasing spring tension) without grabbing onto the piston itself and ruining your new strut, use a 1/2" drive deep well socket (my new one was a 19mm I believe), and since you can't stick a regular ratchet on there, just grab onto the outside of the deep well socket with a pair of vise grips and stick your Allen driver through the socket's drive hole. If the center of the piston on the new strut (or old one for that matter) does not receive an allen wrench but instead takes a regular socket (like my new ones), just stick a 1/4" drive socket on it (in my case it was a 9mm) right on the end and then put your big nut socket on OVER the small 9mm socket and stick a 1/4" extension through the nut socket's drive hole to engage the 9mm socket. Its a great work around and even ratchets! (assuming you use a 1/4" drive ratchet). Hope that helps the next guy.

@s.j.5850 6 ай бұрын

Great tips Big Dog. Best video on replacing the front struts on the Honda Civic.

@martintassin4510 5 жыл бұрын

Extremely well done Sir. Great detailed explanations and precise specifications.

@BigDog50001 5 жыл бұрын

Thank you for the comment!

@AudreysKitchen Жыл бұрын

Doing this job right now, and you've got the best video on the net. Thank you!!!

@rickmcneil9566 4 жыл бұрын

I followed your video from start to finished and I was able to change out my daughters front strut assembly as well as the rear struts without any issues. Your video provided a step by step method that allowed a novice like me to do the work. It saved me money as well as provided me with knowledge and satisfaction of doing the work myself. Thank you.

@BigDog50001 4 жыл бұрын

Awesome! I appreciate the comment, thank you!

@ng30753 Жыл бұрын

Oustanding video. Thank you very much for sharing with all of us. I am trying to help out a friend of mine with the replacement of the struts on her 2006 Honda, and your video shows all is needed to do the work. Thanks again.

@eno_7206 3 жыл бұрын

Your attention to details helps so much thanks.

@BigDog50001 3 жыл бұрын

I appreciate the comment, thank you!

@dilshah Жыл бұрын

I just enjoy your work .Very neat and clean . Excellent. Wish the shop guys do the same way

@danielavila9648 3 жыл бұрын

Felicidades, de verdad que se aprende con tu canal. Saludos desde Panamá.

@rankispanki 3 ай бұрын

You're the best man, I'm doing this tomorrow morning and I've watched endless videos in the last few months to get prepared. Your's is the most informative, thorough video I've found

@BigDog50001 3 ай бұрын

Thank you, I appreciate the comment!

@groundleaf865 4 жыл бұрын

Great Mechanic! You’re a top notch Mechanic.

@BigDog50001 4 жыл бұрын

Thank you, I appreciate the comment!

@angelcastro9830 5 жыл бұрын

Yo man you know how to make excellent videos and your a great mechanic instructor/teacher love your videos makes a job more easier Thank you keep up your good work.

@BigDog50001 5 жыл бұрын

Thank you, I appreciate the comment!

@speedracersworld 5 жыл бұрын

Awesome! It's easier & faster that I expected. Thanks for the Great Tutorial Video!!

@BigDog50001 4 жыл бұрын

Thank you for the comment!

@robham7752 4 жыл бұрын

Excellent video. A lot of people can do a job, but explaining how to do that job in a manner that others can duplicate is an art in itself. You showed everything you need to know to get the job done, straight and simple. My new go to channel for car repair. Keep up the good work and thanks!

@BigDog50001 4 жыл бұрын

Thank you, I appreciate the comment!

@joelawoyomi5864 Жыл бұрын

Please keep doing videos for us, get a project car, break it down into all the different automobile sections such as engine, ignition, chassis, transmission systems. Charge us a small fee to access the channel. You are a gifted trainer, Legend!

@Steve-O_FPV 11 ай бұрын

You rock Big Dog!!! Followed your directions to the T and was able to do this. Thank you.

@msmarshall854 2 жыл бұрын

Excellent honest and very complete content. It's appreciated.

@BigDog50001 2 жыл бұрын

Thanks for the comment 👍!

@ainticool81 2 жыл бұрын

Dude your videos rock! Very helpful!

@GDavis49 5 жыл бұрын

Very thorough and well presented. Keep em comin !

@BigDog50001 5 жыл бұрын

Thanks!

@Cardoza0727 Жыл бұрын

Thank you sir. Definitely coming back to your video when I decide to tackle this job. Earn a subscriber.

@wguan5885 2 ай бұрын

So detailed, so professional, so awesome.

@BigDog50001 Ай бұрын

I appreciate the comment, thanks!

@earvill 4 жыл бұрын

Muy buen video, muestra un trabajo profesional y un gusto por hacer las cosas bien. Te felicito Dave y agradezco tu tiempo.

@BigDog50001 4 жыл бұрын

Thanks!

@alphatruckersinc.9417 3 жыл бұрын

Great video, straight to the point and very good explanation. Thank you, God bless.

@BigDog50001 3 жыл бұрын

I appreciate the comment, thanks!

@TheEnvirotest 2 жыл бұрын

Good job,I’m learning something today,thanks

@radicalrenegade8528 5 жыл бұрын

Excellent as always Big Dog500001!!!!!

@BigDog50001 5 жыл бұрын

Thanks, I always appreciate the comments from you!

@denadude1049 3 жыл бұрын

Great video. Learned a lot. And kudos to the camera man, Dave

@BigDog50001 3 жыл бұрын

Glad it was helpful!

@24hrs365 3 жыл бұрын

Just about to do a complete strut/shock replacement on my Type R FN2. I'm a prevention is better than cure kind of guy so anything that looks slightly worn i will replace it. Great video, clear information, good camera work and audio.

@BigDog50001 3 жыл бұрын

Thank you for the comment!

@rohankhemraj 5 жыл бұрын

Just changed my shocks. It went just as you described. Thanks.

@BigDog50001 5 жыл бұрын

Thanks for the comment!

@felicillo100 3 жыл бұрын

very professional and detailed I respect your job

@BigDog50001 3 жыл бұрын

I appreciate the comment, thanks!

@rt00500able Жыл бұрын

Best explained video ever. Thanks

@TheEnvirotest 2 жыл бұрын

Good job,I learned something today, thanks

@GT350JOE84 2 жыл бұрын

Very good tutorial 👌 👍 Thanks Joe

@raymundocedillo5430 Жыл бұрын

Really good explaining videos, nice work

@arthurfricchione8119 5 жыл бұрын

Just love your videos but I have to change all my tools from standard aircraft tools to metric automotive tools but being a tool junkie mechanic I love it. Will get the sockets and the spring compressor. Absolutely love your videos and your selection of quality parts. Like I said I own Hondas and they are in immaculate condition and have no intentions of replacing them. 👍❤️

@BigDog50001 5 жыл бұрын

Thank you, I really appreciate the comment!

@Nothingiswhatitis 3 жыл бұрын

A great video the instructions and guidance greatly appreciated

@tonylangford8689 3 жыл бұрын

Great video helped me out a lot!

@rrvfr800rr 4 жыл бұрын

Well done, Good process and method, safe and smart.

@BigDog50001 4 жыл бұрын

Thanks!

@RockAlittleSquirrel Жыл бұрын

excellent as always thank you for your work.

@BigDog50001 4 жыл бұрын

Be sure to subscribe for more tool and car repair videos! kzfaq.info twitter.com/BigDog50001 instagram.com/bigdog50001/ Disclosure: This channel earns a small commission using some of these links - at no additional cost to you. The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog50001automotive

@brzilcanal 5 жыл бұрын

Good thank you see you tomorroy, Brazil!

@drdiabeetus3061 Жыл бұрын

I have the same craftsman set. I rarely use it, but for moments like these, it’s clutch!

@ezekieloz 4 жыл бұрын

nice. really appreciate putting this video, i have a civic mk8, but still this is a fabulous video :) hats off...

@BigDog50001 4 жыл бұрын

I appreciate the comment, thank you!

@jjcs1381 5 жыл бұрын

Excellent video

@BigDog50001 5 жыл бұрын

Thanks!

@shhpopes2903 Жыл бұрын

Great video well explained thank you

@Extra330lsapac Жыл бұрын

great video!!

@gRosh08 Жыл бұрын

Another great job!

@kentbenton 4 жыл бұрын

Great video. Thank you!

@BigDog50001 4 жыл бұрын

You bet!

@BADD400 5 жыл бұрын

Cool video. Very thorougher

@BigDog50001 5 жыл бұрын

Thanks!

@SuperZoomster 4 жыл бұрын

The 12 people who thumbs down this video are probably not as handy and are super jealous. Great Video! Very Detailed!

@BigDog50001 4 жыл бұрын

I appreciate the comment, thanks!

@Jennifer7Seven 3 жыл бұрын

Good job, excellent video!

@BigDog50001 3 жыл бұрын

Thank you very much!

@bsm6776 5 жыл бұрын

that torque wrench is awesome!

@BigDog50001 5 жыл бұрын

It does work well, I don't want to use a click style anymore after getting used to this one lol. Thanks for the comment!

@pglazzari1 5 жыл бұрын

Very helpful, thanks brah!!!

@BigDog50001 5 жыл бұрын

Thanks!

@diykhan 2 жыл бұрын

Very informative thanks

@BigDog50001 2 жыл бұрын

Thank you for the comment!

@diykhan 2 жыл бұрын

@@BigDog50001 you are welcome thanks

@diegoreddevil 3 жыл бұрын

Great video

@BigDog50001 3 жыл бұрын

Thanks!

@haidar2638 2 жыл бұрын

Thank you! Not going to do it myself but very informative

@BigDog50001 2 жыл бұрын

Thanks 👍!

@hydster123 4 жыл бұрын

Thanks big dogg...

@BigDog50001 4 жыл бұрын

👍

@rmwarriors16 5 жыл бұрын

Thank you. The video helped.

@BigDog50001 5 жыл бұрын

Thanks for the comment!

@ovidiubuinoiu2746 2 ай бұрын

Imi place tare mult cum lucrezi cu dinamometrica!!

@autobotsvsdecepticons9165 2 жыл бұрын

Great video, thanks! New subscriber here

@BigDog50001 2 жыл бұрын

Thanks and welcome!

@dannysautorepair 3 жыл бұрын

Great video thanks

@BigDog50001 3 жыл бұрын

No problem 👍!

@mornvanhxay1604 4 жыл бұрын

I love it video very helpful 👍🏼

@BigDog50001 4 жыл бұрын

Glad it helped, thanks for the comment!

@lynnwillocks7323 Жыл бұрын

Thank you!!

@faisaljaveed631 2 жыл бұрын

Great video, do we really need a wheel alignment after only shock replacement

@thatpointinlife 5 жыл бұрын

Thank you for this video. My '06 Civic sedan likely needs new front struts. The right front makes a clunking noise going over any bumps, even small ones. This doesn't look terribly difficult or time consuming, especially when using a complete replacement strut. Both the dealership and a local independent have now quoted me at over $1,400 for replacing both front struts and alignment. The Honda dealership will be using OEM, which of course costs more than AMP, but the independent shop is only $60 less for KYB's, but they're saying I'd need new mounting brackets, bellows(?), and bearings. I can't even imagine what bearing there is to replace! What's a fair price I should be expecting to pay for replacing both front strut assemblies, as I don't have the tools or confidence to do this myself. Thank you

@BigDog50001 5 жыл бұрын

When you buy complete strut assemblies they come with all of that stuff, bellows, upper mounts, bearings, springs etc. On this Civic, you can buy complete assemblies from either Honda (online $350 each) or KYB (online $125 each), but the bolts/nuts that should be replaced would need to be purchased separately. As far as installation costs, it varies by region and shops generally charge the fee based on their hourly rate ($75-$150 per hour is the norm) x how long the job should take. If a shop replaces the entire strut assembly the shop should charge less labor per side than if they have to replace the strut with a spring compressor like I showed in this video. An alignment would be another labor charge (typically an hour). If you live in the rust belt, an additional charge for dealing with older rusty fasteners would be appropriate. $1,400 seems about the norm for a dealership but seems a bit overpriced for an independent shop especially if they are using aftermarket parts, at least in my opinion.

@thatpointinlife 5 жыл бұрын

@@BigDog50001 Thank you so much. I was just watching your video on checking for a broken engine mount- lol. The car seems to drive just fine. There's little to no dive or body roll when braking or turning. When I push up and down hard on the front end, there's no noticeable slop or softness in the suspension. The alignment is a tiny bit off, though. I can't find anywhere that says that a clunking noise is associated with worn or bad struts, but ball joints, yes. Looking over the dealer inspection report, it seems as though a tech just test drove it and heard the clunking noise, and decided I needed all new struts just based on that. I know they rotated the tires as part of a basic service, but no mention of actually checking for looseness or damage anywhere while they had it up and the wheels off. They just wanted to charge me $1,400 to replace the struts w/o actually positively identifying the source of the passenger side clunking noise.

@timsager6153 3 жыл бұрын

You can do the strut replacement yourself. Alignment is another thing. You are getting f----d.

@TheDisgruntledMechanic 5 жыл бұрын

It is so unfair!!! no rust for you. That is like cheating! haha! I have a set of the pass thru and have not needed them yet but I have them if I do! great instructional video as always.

@BigDog50001 5 жыл бұрын

I do feel guilty a little bit, just a little bit though! Thanks Mike!

@joseovando5187 Жыл бұрын

Buen trabajo.

@TheDjetic 2 жыл бұрын

Thank you !

@BigDog50001 2 жыл бұрын

No problem !👍

@JoshMelodyMusic 3 жыл бұрын

nice job

@BigDog50001 3 жыл бұрын

Thanks!

@josemedina9412 3 жыл бұрын

Hey bud if I don't have the tools you used for the top nut strut assembly can i get it done with a impact driver? Thank you

@restlessjack0042 5 жыл бұрын

Great quality content! Could you do a honda video about lower ball joint and front wheel bearing replacements? Thanks!

@BigDog50001 5 жыл бұрын

Thanks! I will see what I can do.

@gary4738 10 ай бұрын

Sir, thank you for this excellent video. You mentioned the torque specs for the SI on the upper bolts but did not give specs for the lower 19 mm bolts. Any chance you have that info? Thanks

@albert007e Жыл бұрын

Hi great video, i follow your instruction it work great for the driver side (right hand model) but somehow the passager side wont slide in properly it like the axel shaft get in way, any idea how to solve it?

@cloud-ny5ux Жыл бұрын

how have the kyb struts been holding up? how do they compare to the oem strut? and loud noises or clunks?

@knightsway100 2 жыл бұрын

Fantastic video. Wife’s car just failed the mot test because of a broken front spring.

@BigDog50001 2 жыл бұрын

Thank you for the comment!

@dizziebabyy Ай бұрын

Great video! Question, if I have to replace the cv axle as well; can I do both at the same time? Seems like it would be easier with the strut out of the way, but I’ve never done it. 😅

@arturohernandez2313 2 жыл бұрын

I just replaced both my struts on my 06 Honda Civic LX Sedan. I did half of these steps and my process was faster but I had to come watch this to double check I installed mine correctly. If you know what your doing it shouldn’t take more than 10-15 minutes per strut. Edit: I took off both windshield wipers and the black cover he’s working under. For whoever is reading this don’t take off the bolts from the top like he is. If you know what your doing you can take off that whole black panel up on top and work with a ratchet and extension way easier and faster.

@authenticcalisthenics7825 Жыл бұрын

I have never worked on a car before. You think I should attempt it myself or take it into the shop?

@markanderson2904 8 ай бұрын

@authenticcalisthenics7825 Are you mechanically inclined? If so, you could do it. If not, take it to a shop.

@Exia2004 4 жыл бұрын

Good job

@BigDog50001 4 жыл бұрын

I appreciate the comment, thank you!

@realazzicc2435 3 жыл бұрын

Do you need to put the bolts all the same pressure? Or I can do it with a normal one just tight it up?

@someguyfromthenetherlands394 3 жыл бұрын

Are all the coilovers the same for FN1,FG,FD3 etc? (Civic 2006-2011 included Hybrid)

@godflash3091 4 жыл бұрын

Amazing video I need to change my ASAP but where did you get the tool for tuning the torque on the bolts would really appreciate feedback thanks!

@BigDog50001 4 жыл бұрын

If you mean the torque wrench I used in the video, its a 3/8" Flex Tech Angle Torque Wrench from Snap-On. They are not cheap bit.ly/2TzsaU0 Thanks for the comment!

@big2927 11 ай бұрын

Good video. Is there any particular reason you like KYB?

@MRSOMTHINBASIC 5 жыл бұрын

Jeff Parker told me to stop by... cool channel bud 👍

@BigDog50001 5 жыл бұрын

Very cool, thanks and welcome!

@scottmagyar 2 жыл бұрын

Sir great video, quick question?, I just picked up 2007 coupe Honda Civic, 81,000 miles. And the strut boots are shredded, I ordered new oem boots, any tip to install with out removing strut, thks

@michaelrosenberg852 10 ай бұрын

You load the suspension bu jacking under the lower ball joint. I can’t do that because I have a grease fitting in the way. Can I jack under the rotor instead?

@jlynch916 8 ай бұрын

Random question. When I replaced my front struts I didn’t put the strut under load when torquing all the bolts (top 3 bolts and the 2 bolts that go through the steering knuckle). Been driving the car for 6 months now and have a creaking sound coming from driver side when turning at slow speeds. I’m thinking its possibly because I didn’t torque the bolts when under load. Would I be better off just buying brand new struts again or could I use the struts that are currently on the car but retorque all the bolts when its under load?

@samcarter2371 Жыл бұрын

Do you have to use that compressor tool? I'm asking because I don't have that.

@croustian68 5 жыл бұрын

Where did you take the torque chart for the bolt

@martinmoffitt4702 3 жыл бұрын

Thank you very nice presentation first rate ..What about the top bearing plates?? ..are they reusable all the time also boot and bump stop?...Thanks again Happy New Year! Be safe

@BigDog50001 3 жыл бұрын

They don't have to be replaced every time, but if there is any doubt then it is best to replace them. At that point I generally buy the entire strut assembly which comes with everything. I stick to KYB for Hondas when I buy complete assemblies.

@cheyennew9659 4 жыл бұрын

Dave, I appreciate the professional approach to your video. I'll check out others too. I need to fix a power steering leak (Honda Civic 2006-2011), either its the pump or the "O" rings. Do you have a video on that process or plans to complete one? Can you give me the socket set kit number from Craftsman or the correct tool name since it's hollow shaft? Thank you! Cheyenne

@BigDog50001 4 жыл бұрын

I do not have a video on those yet. Here is the link to the pass through socket set I have, other companies make a similar set. Craftsman pass through socket set: amzn.to/2LsKyvn Thanks for the comment!

@SAr-vc3iw 7 ай бұрын

For 2017 Honda civic what is the torque for the front struts flange nuts (3) on top ? Is it 68ft pound or no.

@MIKEYSREVIEWS Жыл бұрын

After the struts have been changed do we need a wheel alignment?

@mathewphilip7445 3 жыл бұрын

Gr8 job...

@BigDog50001 3 жыл бұрын

Thanks 👍!

@godisgoodatht 4 жыл бұрын

Thanks for the video! Recently hit a decent-sized piece of metal from debris on the interstate cut a good hole in my tread wear. After it happened I noticed a banging sound when I hit bumps even small ones like someone hitting the floorboard with a sledgehammer, so I think it damaged the strut plus the car has over 300,000 miles on it LOL. Do I need to Jack the entire front of the car off the ground or can I jack up each side independently to get the wheel off the ground? Thx.

@BigDog50001 4 жыл бұрын

Personally, if I can avoid it, I don't work on vehicles that are only lifted on one side (more unstable). Another issue is if lifting only one side with a jack (and using the designated side lift point), then there is no place to put the jack stand. For this reason I generally use the lift point in the front center and use 2 jack stands (faster and easier than jacking up car twice when doing work on both sides). On these Hondas I only use the designated lift points and I don't get under vehicles unless jack stands are in place.