Honda Civic Roof Molding (Drip Side Molding) Windshield Trim Replacement (2006-2011)

No video

Honda Civic Roof Molding (Drip Side Molding) Windshield Trim Replacement (2006-2011)

Рет қаралды 256,055

Күн бұрын

Honda Civic Roof Molding (Drip Side Molding) Windshield Trim Replacement (2006-2011). In this video I show how to replace the Roof Molding (also called Drip Side Molding) on an eighth generation Honda Civic. Replacing the windshield trim roof molding on your Honda Civic is a good DIY project that can make the vehicle look much better. The exact vehicle in this video is a 2006 Honda Civic EX 1.8L Sedan. 2006-2011 Honda Civics should be similar.
Be sure to subscribe for more tool and car repair videos!
/ bigdog50001
/ bigdog50001
/ bigdog50001
The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com... (As an Amazon Associate I earn from qualifying purchases).
Disclosure: This channel earns a small commission using some of these links - at no additional cost to you.
Tools and Parts:
Small Screwdriver: amzn.to/34J4DWy
Scan Tool I use: amzn.to/3nKcnR0
Inspection Mirror: amzn.to/2HptvLb
Lisle Clip Remover: amzn.to/31v61LJ
Milwaukee 3/8" Impact: amzn.to/31txcGB
Sunex 3/8" Mid-Lenght Socket Set: amzn.to/34kxv8N
Trim Tool Set: amzn.to/2IIoJsD
Passenger Side Cowl 74220-SNE-A00: amzn.to/2Hptmar
Right Drip/Roof Molding 73158-SNA-013: amzn.to/31vtgp0
Left Drip/Roof Molding 73168-SNA-013: amzn.to/37tVdkE
White Bottom Windshield Clip 91570-SJD-003
White Bottom Roof Clip 91572-SDA-A01: amzn.to/2HjQtn2
Brown Trim Clip 73115-SNA-003
Yellow Trim Clip 73154-SNA-003
Blue Trim Clip 73153-SNA-003
Cheap Vernier Caliper: amzn.to/2ITIttB
240 Piece Trim Clip Set: amzn.to/3ji4n68
415 Piece Trim Clip Set: amzn.to/3dM5NEL
Want a free Big Dog50001 sticker? Send an email to bigdog50001@gmail.com requesting a sticker. Sorry, no international addresses or automotive questions.
Have something you would like to send to Big Dog50001?
Send it here:
Big Dog50001 Automotive Channel
P.O. Box 726
Cortaro, AZ 85652
2020 Epidemic Entertainment. All rights reserved.
Disclaimer:
Due to factors beyond the control of the Big Dog50001 Automotive Channel, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. The Big Dog50001 Automotive Channel assumes no liability for property damage or injury incurred as a result of any of the information contained in this video.
The Big Dog50001 Automotive Channel recommends safe practices when working with power tools, in on or around automobiles or other vehicles, automotive lifts, lifting tools, jack stands, electrical equipment, automotive modules and systems, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of the Big Dog50001 Automotive Channel, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not the Big Dog50001 Automotive Channel.

Пікірлер: 286

@BigDog50001 3 жыл бұрын

*Tools and Parts* Disclosure: This channel earns a small commission using some of these links - at no additional cost to you. Small Screwdriver: amzn.to/34J4DWy Scan Tool I use: amzn.to/3nKcnR0 Inspection Mirror: amzn.to/2HptvLb Lisle Clip Remover: amzn.to/31v61LJ Milwaukee 3/8" Impact: amzn.to/31txcGB Sunex 3/8" Mid-Lenght Socket Set: amzn.to/34kxv8N Trim Tool Set: amzn.to/2IIoJsD Passenger Side Cowl 74220-SNE-A00: amzn.to/2Hptmar Right Drip/Roof Molding 73158-SNA-013: amzn.to/31vtgp0 Left Drip/Roof Molding 73168-SNA-013: amzn.to/37tVdkE White Bottom Windshield Clip 91570-SJD-003 White Bottom Roof Clip 91572-SDA-A01: amzn.to/2HjQtn2 Brown Trim Clip 73115-SNA-003 Yellow Trim Clip 73154-SNA-003 Blue Trim Clip 73153-SNA-003 Cheap Vernier Caliper: amzn.to/2ITIttB 240 Piece Trim Clip Set: amzn.to/3ji4n68 415 Piece Trim Clip Set: amzn.to/3dM5NEL The Big Dog 50001 Automotive Channel Store can be found here: www.amazon.com/shop/bigdog50001automotive (As an Amazon Associate I earn from qualifying purchases).

@Nitrogeek101 3 жыл бұрын

Do you know the replacement for those plastic covers/slides that expose the clips on the weather stripping on sides of windshields.

@EmirMuhic 3 жыл бұрын

Thanks for doing these videos! I've now been able to fix four different things on my Civic thanks to your videos.

@BigDog50001 3 жыл бұрын

Good to hear they are helping, thanks for the comment!

@pughconsulting 3 жыл бұрын

Literally just ordered new roof molding for my Accord a few days ago and this video comes out. Crazy timing.

@BigDog50001 3 жыл бұрын

👍

@americo9999 Жыл бұрын

whoa, I just replaced the moldings on my 07 Civic today, I just had same problems at first when removing one of the moldings but all went very smoothly, this was a great video, I was hesitant to do it myself but this video helped me a lot on what to do. Thank you for making these videos! yeah 2023 and I'm still using and old 07 Civic :)

@hijoseph100 6 ай бұрын

Hey bro do you mind if you drop the link for all the parts you used? I drive a 2006 civic. Having a hard time finding the parts.

@MilagroValle-fy6ku 5 ай бұрын

@@hijoseph100 let me know if you find them I’m trying to find some parts for my 2009 Honda civic

@kevhed8 Жыл бұрын

Just got around to replacing both of my moldings on my 08 civic today. It went smooth and had no issues, thanks to your video. You have a great series of videos and your channel is always my first stop if I have work to do on my civic. Thanks for making the videos and making our repairs less troublesome.

@BigDog50001 Жыл бұрын

Thank you, I appreciate the comment!

@jimmyyking 3 жыл бұрын

Awesome vid. Still can’t believe how expensive these are and how they all almost always fail within a matter of time. I bought some home depot rubber with one sticky side, cut them to length and slid it underneath the space between the windshield to cover those clips. Excellent video and right to the point. Well done, sir.

@BigDog50001 3 жыл бұрын

Thanks 👍!

@dannilaser16 Жыл бұрын

Totally agree with you. Honda parts department quoted me a price of almost $400. Needless to say, I declined buying them. Ripoff.

@dannilaser16 Жыл бұрын

Great video. Thanks for sharing.

@Jez2008UK Жыл бұрын

jimmy, in what way did yours fail? I have a Honda Accord 2006 model and I've got a gap between my rubber and the glass, I'm wondering how that could have happened as my car hasn't been in any accidents and the molding doesn't look warped in any way?

@jimmyyking Жыл бұрын

@@Jez2008UK for the civics, the piece that contacts the windshield gets brittle and likely breaks and flies off on the freeway.

@reelreeler8778 3 жыл бұрын

I bought my first Honda when I got out of the Navy in January of 1977. It was a left over 1976 CVCC Civic, and I bought it brand new for $3000 even. These days we have a '12 Civic and a '17 Fit....Very much enjoy your informative how-to videos.

@BigDog50001 3 жыл бұрын

Glad the videos help, thanks for the comment!

@brawlman 3 жыл бұрын

Man, SPOT ON video instructions! Thank you for the time you spent doing a great job... Subbed.. I literally just did the install today and maybe spent 30min, more so making sense of the driver side first. It appears that the passenger side windshield clips are installed before the windshield is installed, because the windshield is flush against the clip. There is no way to remove the clip without breaking the bottom of the clip to lift it out... For the parts, check online with your local dealer's "Online Parts", because there's a significant price difference... In short the R&L Roof drip sides were $95.22 here in Southern California vs the same dealers price of like $130! My body shop wanted $109... The one note I would add is how to remove the front end towards the windshield. 1) To clarify, you don't need to remove any part of the cowel assembly; you did mention that you were doing it, but not needed to remove the roof trim. 2) start with releasing the windshield clips and then the roof clips 3) then flex the middle of the windshield section of the trim and pull the end back and out...

@BigDog50001 3 жыл бұрын

👍

@JuanMartinez-hu6jk 3 ай бұрын

Just replaced the roof moldings on my daughter’s 11 Civic. Great video and instructions! No broken clips other than the two I dropped into the engine compartment! I used a small quarter inch drive socket to compress those cowl fasteners to remove them. Thanks!

@patanderson7720 2 ай бұрын

We also have a 2011 Civic that needs this replaced. Would you please share where you bought the moldings? Would appreciate as much detail as you care to provide. The links provided by BigDog aren't all good anymore as they're 3 years old.

@arthurfricchione8119 3 жыл бұрын

Dave I’m glad to see I’m not the only person breaking clips. Nothing like working with dried out plastic. In the dessert where you are heat destroys everything and up here in the north rust destroys everything. On my Honda Odyssey sliding door there is a rubber bumper on the top aft inside of the door that completely melted.all junk and the parts aren’t cheap. Thanks for sharing. Hope everyone is well and safe Artie 😊😊😊

@BigDog50001 3 жыл бұрын

Thanks for the comment Artie!

@curtishouze1471 2 жыл бұрын

Thank you for the tutorial. I made my daughter watch it twice and she did an exceptional job.🙏🏾🙏🏾🙏🏾

@onemorekayaker1934 Жыл бұрын

Thanks for this very thorough video - I was hoping this would be a simple job, but now I think I'm just going to try the dealership lol 😂

@kimroth7868 2 жыл бұрын

Oh, by the way, your video was much more explanatory and easy to follow than any other I watched.

@southwindfall3583 4 ай бұрын

Great video! The OEM instructions were so bad but your explanations helped a lot. Also thanks for showing all the part numbers, made looking for replacements so much easier. Thank you so much.

@drdiabeetus3061 2 жыл бұрын

Good detailed video! I find that using a silicone spray lubricant really helps loosen up these clips so you don’t break them. I used garage door lube specifically for the brown clips and roof line. No breaks!

@drdiabeetus3061 Жыл бұрын

@@SarcasticCynic Blaster PN: 16-GDL. I picked it up from Lowes. It’s a silicone/Teflon spray.

@MrJalcantar32 3 жыл бұрын

Thanks again for your time in making these great tutorial videos I’m positive that everyone appreciates all your work. 👏👍

@BigDog50001 3 жыл бұрын

Thank you, I appreciate the comment!

@carlosquin4822 2 жыл бұрын

The 2008 accord coupe has a rubber seal on the inner edges of that moulding where one part goes under the glass and the other is on top of the windshield glass. Some mechanics forget that and then the mouldings don’t go down properly. Nice video!!

@Yourmommastinks 3 жыл бұрын

Hey man this is the most thorough video I have EVER seen. This video is terrific. I am definitely adding you to my favorites. Thanks!

@BigDog50001 3 жыл бұрын

Thanks 👍!

@ozzstars_cars 3 жыл бұрын

It's those small details that make a big difference. Nice job

@BigDog50001 3 жыл бұрын

Thanks, I appreciate the comment!

@CDFFL2012 3 жыл бұрын

Awesome video!! Nice job!! Your video saved me $256. My local Honda dealership wanted to charge me that for labor for both drip molding. I can't thank you enough. One thing I would like to add. I did what you said about buying new clips (which they are very cheap) but my local Honda dealership didn't have all the clips. I had to try and save one clip (the brown one). Your video said to snap them out, but be careful because I ended up breaking the small tab that locks the clip into place in the track. So what I found out because I tried it out on the other clips that I replaced is that you have to use a screwdriver and try to get underneath the rail somewhere near the middle of the clip and press down slowly and the clip should pop right out. Once again I can't thank you enough for making this video.

@BigDog50001 3 жыл бұрын

👍

@pgwarth 28 күн бұрын

Gosh Bigdog, I wished I had seen this video when I had to replace my trim pieces back in 2017. The clips were darn hard to get out, broke nearly everyone of them but I had ordered complete sets for both sides so I just replaced everything. I shot some video of me doing it but up against your video mine looks like crap so I never posted it. Thanks for doing such a great video. And thumbs down to Honda for building such a crappy part that deteriorated within the first 5 years! At the replacement part is fairing much better - maybe they built a better replacement!

@jason4454 10 ай бұрын

Don't bother taking off the cover. You can side the molding out and the new part in without all this extra work.

@mgmohile 2 жыл бұрын

Great detail video. I watched a couple of times before working on my car and replaced molding without any issue. Did not remove additional parts under hood though as I don't have all other required tools for that.

@danieljohnson2551 2 жыл бұрын

Great video, nicely done. My daughter and I are getting ready to do this on her car, so now I know what I need to do to prep for it (buying extra replacement clips, mostly). So thanks!

@Bruhski321 Жыл бұрын

What purpose does the molding serve? I have a leak coming into my car and trying to figure out if the roof molding /windsheild molding keeps water out?

@tj7516 Жыл бұрын

Excellent video Sir! You did a fantastic job explaining and showing every step. And most importantly, you provided OEM part numbers w/links!!! Thank you very much! I’m a subscriber!

@chuckkelsey8636 Жыл бұрын

This was sooooo helpful in finding the correct parts. Thanks so much!

@rebeccaf4414 Жыл бұрын

Agreed. I had no idea the part I needed was called a cowl…. Improving my daughters car one project a month.

@kimroth7868 2 жыл бұрын

There seems to be a piece of rubber seal along the drip moulding that I are missing on a 2008 Civic. I can't seem to find this part. Could you help a grandma out and tell me what this rubber part is called or send a link for it? Thanks

@localwaifu9794 3 жыл бұрын

Installed mine on Monday but I’ve put the comment on the window trim video. Thank you for this.

@BigDog50001 3 жыл бұрын

👍

@daviderhahon 3 жыл бұрын

"Just pry from the top and pray you don't break it ". Some seconds later, "Yeah, hey, we didn't break it " But I didn't hear you say a prayer.. 😁😁 Hey, thanks for the video. Really nice and helpful.

@BigDog50001 3 жыл бұрын

👍

@hattrick-df4bo 3 жыл бұрын

Excellent video, loved all the tips, step by step info, and part numbers!!

@BigDog50001 3 жыл бұрын

Thanks 👍!

@kelvera88chief67 Жыл бұрын

I got a killer deal on an FA5, 91k, clean title but the paint and seals are rough. But a little tlc and Im gonna bring it back. Such a great looking car.

@marculim1764 2 жыл бұрын

Awesome video! You were a massive help when I replaced my strip. Keep up the good work

@BigDog50001 2 жыл бұрын

Glad it helped, thanks for the comment!

@jimthecarguy 3 жыл бұрын

Nice step by step video. I hope all is well.

@BigDog50001 3 жыл бұрын

Thanks Jim!

@Christoph877 2 жыл бұрын

I have a leak, so was just going to remove molding and use sealant wherever looks like cracked or leak coming from. This is much more work than I anticipated, to remove all those other pieces just to remove the molding.... 🤦‍♂️. I may just be rebellious and remove molding without all the other under the hood stuff. Totally unprepared for something I need done in a rush, before it rains again.

@geoffstutzin2010 7 ай бұрын

Great video, extremely clear. I need to do this in any case for a ‘07 because the strips touching sides of windshield are practically disintegrating, but I’m also wondering, could this be the cause of water getting in passenger compartment and making car smell moldy? Thanks! Edit: also, I believe part# for brown clip is incorrect, based on internet search. Think it is 73155-SNA-003, not 73115 … (4th digit is 5, vs. 1)

@Allbbrz 8 ай бұрын

Thank you ! The video is awesome. But boy, it's a crapload of extra work.

@Nate.gardner96 3 жыл бұрын

Thanks man I used your step by step to replace both of mine and it really helped

@BigDog50001 3 жыл бұрын

👍

@Andrew-sv6zq 3 жыл бұрын

Thank you! I need to do this on my daughters 08 Civic on both sides and now I know what's expected. I figure we'll just buy all of the replacement parts at once and what we don't use, we'll take back to Honda.

@BigDog50001 3 жыл бұрын

👍

@mrcross5716 Жыл бұрын

Thank you for this! Proper job! Lots of bad videos on this subject, this however is spot on!

@BigDog50001 Жыл бұрын

I appreciate the comment, thanks!

@ShanerTheGrey 3 жыл бұрын

Wow I was just THINKING about this for my civic and youtube freaking read my mind😭

@BigDog50001 3 жыл бұрын

lol

@atown6123 Жыл бұрын

dudes a perfectionist. nice vid

@gerrybracamontes4369 Жыл бұрын

Great video. We'll explained and easy to follow instructions. Thank you. You made it easy for me to replace this expensive moldings. Good job.

@alejandrogomez-kp8gw 3 жыл бұрын

thanks

@rodrigoeduardotamasiadasil2296 6 ай бұрын

Thanks for your effort on this video. Was perfect. 👌🏼👍🏼

@BigDog50001 6 ай бұрын

Awesome, glad it helped!

@joedominick7517 3 жыл бұрын

Big Dog you make it look so easy. Great Video

@BigDog50001 3 жыл бұрын

Thanks 👍!

@cesaraugusto1879 Жыл бұрын

Very detailed video, unfortunatelly removing that front panel and even the car hook seems too much work to do but it’s the only way to do it correctly.

@itslife5070 2 жыл бұрын

Thank you for a very informative and clear video.

@BigDog50001 2 жыл бұрын

You bet , thanks for watching 👍!

@montyv9801 3 жыл бұрын

wow this was incredible really gives me the confidence to do it myself. Thank you

@BigDog50001 3 жыл бұрын

👍

@_ROLO_77 6 ай бұрын

Very good videos the Tips and explanations thanks !!

@BigDog50001 6 ай бұрын

Thanks 👍!

@JohnFKiley-uu4qo Жыл бұрын

the video is a tremendous help. i reattached the molding but it is old (2007 LX). I would have been better off replacing it. Please share where you found the part number for the roof trim. Thx

@castercyrus9076 3 жыл бұрын

awesome video sir! i have the same car and my trim is also mess up, this will help me alot. can u also make videos like brake fluid flush or coolant flush. thanks in advance

@BigDog50001 3 жыл бұрын

I will see what I can do, thanks for the comment!

@claudiaruiz2922 3 жыл бұрын

Not all heroes wear capes. Thanks for the amazing videi

@BigDog50001 3 жыл бұрын

Thanks!

@XtremeBordom 3 жыл бұрын

Damn that was an amazing video! Perfect step by step and didn't leave me guessing at all. Now I know I can do this myself!

@BigDog50001 3 жыл бұрын

Thank you, I appreciate the comment!

@OhioConcealed 3 жыл бұрын

Excellent instructions, you have the best DIY videos for the Civic. Thanks for sharing...

@BigDog50001 3 жыл бұрын

I appreciate the comment, thank you!

@pauldunning3551 3 жыл бұрын

Very helpful and nice video. Did the work myself, you made look easy. Thanks for the video.

@BigDog50001 3 жыл бұрын

Glad it helped, thanks for the comment!

@aaronparker1070 2 жыл бұрын

Once again thanks for the great video! I have also watched your videos for the rear shocks and flushing the ps fluid. My '08 Civic is about to roll 200k miles. Roof molding should be good for another 200k :-)

@raulmorales9967 2 жыл бұрын

Thanks for the video.Have a great day.

@BcCam 3 жыл бұрын

What a great video! Good Job. This really helped me. Those clips are very difficult to figure out, and your video explained exactly what was needed.

@BigDog50001 3 жыл бұрын

👍

@susashsh 3 жыл бұрын

can you provide the part no. of rubber seal (25.01 on your video) or the amazone link. Thanks

@momentwander 3 жыл бұрын

Can i Just change the plastic at the side that covers the windshield?

@thatzlyght755 2 жыл бұрын

Amazing job man thank you nice little project for me on my 07 Si

@davidoliver6402 6 ай бұрын

Awesome video thanks 🙏

@BigDog50001 6 ай бұрын

Thanks 👍!

@juanfelipe1213 3 ай бұрын

Thank you.

@dannilaser16 Жыл бұрын

Thanks for sharing. Very detailed video.

@brooklyn91eg Жыл бұрын

Did it step by step easy swap thanks 👍🏾👍🏾👍🏾

@muhammedharis6316 Жыл бұрын

Fantastic work

@philmccracken4501 2 жыл бұрын

Thanks for the vid. Just swapped mine out!

@BigDog50001 2 жыл бұрын

👍

@ABCABC-hn1xw 3 жыл бұрын

Not required to remove wiper cover save time .Probably will need to buy a few windshield white n yellow clips and the bottom brown clip

@paulk468 10 ай бұрын

very good video but you do not really shoe the seal that goes from.the top og the windshield down to the end. The 2009 Civic i just bought has nothing sealing from the top of the windshield to the end. Is that part of this replacement or is that a seperate part? Have a keak around the winshield so going to replace the windshield but nned to know how and where to get the rubber from the top of the of the windshield to the end. Is it part of the replacement pieces that you put in or us it seperate?

@rockyroad3130 3 жыл бұрын

Are you working mainly on this generation of civics or do you do other cars? I just got a 2011 civic. And I’m interested to learn how to work on them. Great video thank you.

@BigDog50001 3 жыл бұрын

I will work on just about anything but I specialize in Hondas (and not just this generation Civic). Thanks for the comment!

@tuliozeron6774 3 жыл бұрын

thanks for the guide, amazing

@BigDog50001 3 жыл бұрын

You bet 👍!

@angelofthewest1 9 ай бұрын

Hey I got a 2007 Honda civic having a wet carpet issue on a passenger side , already replaced the inner and outer weather stripping they are brand new and still having the same problem any idea what else could be the problem? Thank you.

@ipdtt 2 жыл бұрын

Great video sir thank you!

@BigDog50001 2 жыл бұрын

Thanks for the comment!

@petrusgoel Жыл бұрын

nice...guess its the same step for honda stream rn6

@heatherhewett6682 7 ай бұрын

Thank you so much!

@BigDog50001 7 ай бұрын

Thank you, I appreciate the support!!

@ejd.1536 Жыл бұрын

Great video! What is the part number for roof molding windshield trim replacement?

@dietice8955 3 жыл бұрын

what happens if you don’t have these on your car? are there any long term effects?

@MAKOLA61 Жыл бұрын

Very informative video thanks a lot

@annly666 2 жыл бұрын

my 8th gen is moulding too. T.T great video xx

@chris12321222 5 ай бұрын

I just hit mine with a blow torch, back to black again!

@momentwander 3 жыл бұрын

Hi I want to know if what is the left side and the right side? Is the right side when you are inside the car?

@BigDog50001 3 жыл бұрын

Left and right sides are when you are sitting in the vehicle.

@momentwander 3 жыл бұрын

@@BigDog50001 thank you.

@kojam1 Жыл бұрын

I have the drip side molding still, however, the rubber which covers the white clips that run along the side of the windshield were ripped off in a car wash. I didn't realize what they were. I thought it was a piece of the car wash. LOL. I thought it was the drip which I needed to replace but it's just those rubber pieces. I have no idea what they are called! been looking everywhere online to try to find out. any idea?

@abechristensen1053 2 жыл бұрын

Incredible viedo man! Amazing quality

@fishingwithpabs8391 2 жыл бұрын

Where can i purchase the rubber seal that fills in the cap from the moulding to the glass i replaced my windshield and the rubber fell apart and i need new one if anyone can tell me where to buy or the name of the piece for 2006 civic lx sedan

@Fallo7 11 ай бұрын

Hi, my trunk is leaking water and after further research on 2013 civic Si other people have had same issues. One person found that it’s leaking at the roof seam - body weld seams - under the roof moulding … do you know how to fix this issue?

@chadtomasoski7869 2 жыл бұрын

At 25:01 you talk about the rubber seal laying nicely against the glass. This rubber seal is the part I need on both sides not the roof drip mounding. Do you have a video for that part? Where do I get replacements of that?

@smokebigweed4207 3 жыл бұрын

Looks great!

@BigDog50001 3 жыл бұрын

Thanks!

@american4427 Жыл бұрын

I want to ask you a question... Can I do this work at home, even though I have no knowledge or experience in changing this...???

@isalee5249 5 ай бұрын

Bro what to do if the Clip slides down the side of the engine bay where will it end up? I keep hearing a noise in my engine bay since dropping my clip in the side..

@Robert-wj5pd 2 жыл бұрын

Great instructional! Only part that confused me-you say the bottom brown clip was seated in the windshield epoxy, so it broke off when you were removing the passenger side molding. When you replaced it, what did you secure it to? I’m struggling to understand how a replacement clip there would be functional if the old one was held in place by windshield epoxy. Thanks! -Robert

@BigDog50001 2 жыл бұрын

The new one probably wasn't doing much to hold it in (it just popped into the same epoxy void as the old one), but those bottom clips typically don't do much (due to their style) and don't have much strength. The other type clips are strong and what holds the trim in. I don't recommend cutting or messing with windshield epoxy. Thanks for the comment!

@ndangla Жыл бұрын

Excelent video. Thanks for sharing.

@Tinker25 6 ай бұрын

I've got an 11 accord would this be similar work for it?

@alexander11mendez85 3 жыл бұрын

Those are in Amazon , thanks for the video , from LA

@BigDog50001 3 жыл бұрын

👍

@Hellspawn100 Жыл бұрын

Great video. Have been looking for a proper demo like this one to do the same thing on my FD4. Big thumbs up for you & +1 sub. Thanks a lot man!

@AppleShortss 3 жыл бұрын

Thanks for the video I have been watch replace the same on my civic

@BigDog50001 3 жыл бұрын

👍

@polaridadx9120 2 жыл бұрын

Thanks my brother

@Hayzin 2 жыл бұрын

Excelent video! It will help alot to change mine!

@BigDog50001 2 жыл бұрын

👍

@localwaifu9794 3 жыл бұрын

Very helpful

@BigDog50001 3 жыл бұрын

Thanks 👍!

@Jez2008UK Жыл бұрын

Hi there, can you explain WHY you did this job please? I have noticed that on my Honda Accord there is a gap between the rubber seal and the glass (on the driver's side) whilst there is no gap on the passenger side. I've just gotten a quote from Honda UK and it's around $350 to do one side.....In your video, did you take off your rubber seal? I'm concerned that if I replace mine, I'll still have that gap, but I'm pretty certain my car isn't damaged in any way, so to know why you changed yours could help me understand better (for sure they do dull and don't look so well after x number of years, like mine and yours now look a lot smarter, so did you do it only for cosmetic reasons? Many thanks :)