Honda CRV 2013 to 2017 Front PADS and ROTORS REPLACED

Рет қаралды 32,612

3 жыл бұрын

Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic
#hondacrvbrakes #hondacrv #crv #hondacrvfrontbrakesandrotors #frontbrakepads #frontbrakes #hondacrvfrontrotors #2014hondafrontbrakes

Пікірлер: 65

@gregnewlin1009 2 жыл бұрын

Thank you for posting this very helpful video! Your suggestion about how to remove the rotor retaining screw saved me a lot of aggravation, much appreciated!

@ashrafsiddiquee3190 Жыл бұрын

Bro you are a honest and clear macanic. I can tell for sure from something I heard you said. Thanks for the video. I'm going to do the same brake job on my 16 crv in another 5000 miles. Thank you

@RBTheMechanic Жыл бұрын

Yup it’s good to keep it honest and real I even say bad stuff when it needed to be but it’s honest bad lol anyways let me know how ur job goes

@ashrafsiddiquee3190 Жыл бұрын

@@RBTheMechanic sure I will. Thanks

@admiralking 2 жыл бұрын

Great video! Thank you for your efforts. Be sure to specify front or all wheel drive when you order front brake pads. There is a difference in length.

@RBTheMechanic 2 жыл бұрын

Sure will!!

@gianni5752 11 күн бұрын

Merci beaucoup tu a sauvé ma journée 👍

@RBTheMechanic 11 күн бұрын

Sorry idk the language

@newfie8065 2 ай бұрын

Thx keep the videos coming i appreciate u

@RBTheMechanic 2 ай бұрын

Yup!

@CJ-214 10 ай бұрын

Great video, peace and love from Denver, Co.

@RBTheMechanic 10 ай бұрын

Thank u

@HMcdon 2 жыл бұрын

Great illustration.

@RBTheMechanic 2 жыл бұрын

Thank u

@imloggedin 9 ай бұрын

If you are watching this, make sure you watch a video on the rear pad replacement too if you plan on doing those. They are not the same and require much more effort to deal with the electronic e-brake.

@RBTheMechanic 9 ай бұрын

Yup I have videos on electric rear brake system

@mr.archippus1561 2 жыл бұрын

Nice video

@RBTheMechanic 2 жыл бұрын

Thank u

@condor5635 2 жыл бұрын

Great video - you say 14 mm and 19 mm. At the end of the video it seems to be 8 mm (caliper pins) and 14 mm ( bracket). Seems anti seize on that Phillips screw would be a good idea. Thanks for posting

@RBTheMechanic 2 жыл бұрын

Yeah thank u it’s just look small on camera

@joeo8396 9 ай бұрын

Great video! Wacked the rotor trick worked like a charm. The screw came right out. Perfect. Thanks!

@RBTheMechanic 9 ай бұрын

Nice good job

@joshfrancis9069 3 жыл бұрын

Dont know how to message you need a little help with my grounds in a 93 accord where it goes from bat to block or chasis or starter confused please help

@RBTheMechanic 3 жыл бұрын

I can check it tomorrow and I can let u know just remind me around 11am

@liggerstuxin1 5 ай бұрын

My rotors are shiny and new (under a year old), but one of them got prematurely, worn down due to the brake pad not being replaced in time. Do I still need to replace both rotors? Obviously I need to replace both brake pads regardless, but I’m wondering if both routers are new if I need to replace both of them. Because one of the rotors has grooves in it where the brake shoe thing was brought down to metal and put grooves all in the rotor.

@RBTheMechanic 5 ай бұрын

I would replace both them to be equal

@liggerstuxin1 5 ай бұрын

@@RBTheMechanic damn. Thank you 🙏

@RBTheMechanic 5 ай бұрын

@@liggerstuxin1 welcome!!

@ashrafsiddiquee3190 Жыл бұрын

1 question. On a AWD vehicle do u have to replace all the brakes in same time ??? Dose it matters bcz of AWD ????

@RBTheMechanic Жыл бұрын

Yes they r diffrent I think this was awd

@BlondieSL Жыл бұрын

Near the beginning, when you mention the impact tool, I have to say, before watching all these kinds of videos, I had not heard of that tool. So the other day, I went and bought on that was on sale for $15 and I had a chance to try it on that very screw. It was amazing. Just 2-3 slaps with the hammer and the screw came out nicely. I wish I had known of this tool years ago. LOL I have a question. Is it true that the rotors on the front ARE vented, but the rotors on the rear are NOT vented? Specifically, on a 2016 CRV SE AWD ???

@RBTheMechanic Жыл бұрын

No rears are not

@BlondieSL Жыл бұрын

@@RBTheMechanic Well, I finally bit the bullet and did the brake job, back and front. New pads and rotors. It took me a while because I used the die grinder to clean up a lot of rust here and there. But what a difference now. Thank you so much for your extremely helpful video. Cheers

@RBTheMechanic Жыл бұрын

@@BlondieSL nice good job doing it urself!!!

@mor7464 Жыл бұрын

Does the 19mm need to be foot lb torque as well. Please give me a reply back. I’ll be doing my brakes soon. I would like your opinion on it.

@RBTheMechanic Жыл бұрын

If u have torque wrench and specs do so

@RBTheMechanic Жыл бұрын

@@Main-street no rear are diffrent

@RBTheMechanic Жыл бұрын

@@Main-street what year make model is ur car

@StreetMoneyTv Жыл бұрын

What program is that at the end of the video that show you what bolts and socket you need

@RBTheMechanic Жыл бұрын

That’s shop data

@StreetMoneyTv Жыл бұрын

@@RBTheMechanic where can I get that? work on brakes and would love to use that

@RBTheMechanic Жыл бұрын

@@StreetMoneyTv u mean parts?

@StreetMoneyTv Жыл бұрын

@@RBTheMechanic no at the end of your video it showed what size socket was needed to take of calipers bolt and pin

@RBTheMechanic Жыл бұрын

@@StreetMoneyTv that’s shop data $400 month subscription

@lintangmahari7549 4 күн бұрын

thats the same rotor for crv gen 4 and gen5?

@RBTheMechanic 4 күн бұрын

Not sure I would confirm with parts depertment

@maurics78 2 жыл бұрын

Great video. Please I need torque specs for honda crv EXL 2013

@RBTheMechanic 2 жыл бұрын

80 and 25

@maurics78 2 жыл бұрын

@@RBTheMechanic Thank you so much. These specs can used for AWD...?

@RBTheMechanic 2 жыл бұрын

@@maurics78 yup

@maurics78 2 жыл бұрын

I appreciate it. I have a question. I bought an acdelco rotor, but apparently it is a little bigger than the original rotor, can this cause a problem or should I look for a rotor that is the same as the original? Which one do you recommend Crv 2013 Exl?

@RBTheMechanic 2 жыл бұрын

@@maurics78 I’m not expert on parts but those rotors wount even fit u can go with electric coated rotors that’s what I mostly use also the acdelco is good