Honda Element Console Light Replacement

No video

Honda Element Console Light Replacement

Рет қаралды 59,035

Күн бұрын

Here is an easy repair you can perform and save yourself a lot of money in the process. You might be surprised at how easy this really is. I think the hardest part will be sourcing the bulbs, but I’ve made that easy for you further down in the description.
#ETCGVideo
My Patreon Account: / ericthecarguy
The best place for answers to your automotive questions: www.ericthecarg...
Check out the ETCG Blog for the latest info: www.ericthecar...
Check out my ETCG1 channel: www.youtube.co...
Thanks for watching!
Parts
Dial Bulbs: 79629-SV3-A01
Button Bulbs: 79629-SCV-A01
Shifter Bulb: 35505-TA5-A51
Tools
Trim Tool: www.jbtools.co...
Related Videos
Honda Element & CRV Alternator Replacement With Diagnosis: • Honda Element & CRV Al...
Honda Element/CRV 110K Service (Part 1): • Honda Element/CRV 110K...
Honda Element/CRV 110K Service (Part 2): • Honda Element/CRV 110K...
How To Reset Honda Element Maintenance Light: • How To Reset a Honda E...
Honda K Series Valve Adjustment: • Honda K Series Valve A...
Honda Element/CRV Thermostat Replacement: • 2004 Honda Element/CRV...
How To Change Power Steering Fluid Honda Element: • How To Change Power St...
Honda Element Front Stabilizer Link Replacement: • Front End Noise, 2003 ...
Honda Element Lower Control Arm Bushing Replacement: • Honda Element/CRV Fron...
How To Replace Ball Joints and Tie Rod Ends Honda Element/CRV: • How To Replace Ball Jo...
Finding and Repairing Rear End Noise Honda Element: • Finding and Repairing ...
Honda Element Hood Cable Replacement: • How To Replace a Honda...
Honda Element HID Headlight Installation: • How To Install an HID ...
How To Install Projector Beam Headlights: • How To Install Project...
Battery Care and Maintenance: • Battery Care and Maint...
New Grill for my 2004 Element (Bumper Removal Detail): • A New Grill For My 200...
How To Install Element Fog Lights (Part 1): • 2004 Honda Element HID...
How To Install Element Fog Lights (Part 2): • 2004 Honda Element HID...
**Answers to your automotive questions found here: www.ericthecarg...
Social Network Links
Facebook: www.facebook.c...
Twitter: / ericthecarguy
Google+: plus.google.co...
Instagram: / ericthecarguy
Wanna see more stuff like this from ETCG? Information on Premium Membership: www.ericthecar...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy®.

Пікірлер: 270

@malcolmyoung7866 3 жыл бұрын

One of those jobs you out off but when you actually do it is immensely satisfying..

@benicioatlas4951 3 жыл бұрын

a trick: watch series at Flixzone. Been using it for watching loads of movies during the lockdown.

@Mrsteve4761 3 жыл бұрын

A good design allowing easy lamp replacement - refreshing

@gaveintothedarkness 3 жыл бұрын

BMW - Step 1. Remove bumper and engine.

@panzerveps 3 жыл бұрын

@@gaveintothedarkness Audi: Assume the service position VW: Remove all necessary trim covers with a handy tool (does not specify which tool)

@AdinBriggs 3 жыл бұрын

@@panzerveps "Use special tool." Proceeds to print blurry picture and not list part number for tool, tool is only mentioned once in all of manufacturer's history but is required for job.

@panzerveps 3 жыл бұрын

@@AdinBriggs So true. It's even worse for Skoda. They skip entire sections of instructions for disassembly, and when it's time to assemble it again, it's "assemble in reverse order". I've worked 6 years with Audi, 7 with VW and 3 with Skoda, and this is driving me nuts, but for some reason, I can't see myself working for another brand...

@bingjimenez566 3 жыл бұрын

Thanks for the video Eric. I need to do this myself. So many of us in the Element community find your videos amazingly helpful. Sad to hear you're getting rid of yours, I hope to see more Element video on your channel in the future before that happens. '07 EX original owner.

@sirnik84 3 жыл бұрын

Just did this job on my 84 Mercedes. Its amazing how lovely the controls are when its all illuminated.

@labradormcgraw 3 жыл бұрын

Probably the most valuable part of this video is showing where exactly to go in with the trim tool. It's so easy to break clips if you use leverage in the wrong place. Thank you for the insight.

@ericthecarguy 3 жыл бұрын

I'm glad people notice stuff like that as it is very helpful when doing the job. Thanks for that insight. Have a great weekend.

@roz7353 Жыл бұрын

Yep! I rewound and then freeze-framed and inserted tool just where Eric did. Popped right off!

@ReadySetElement 3 жыл бұрын

Eric you're the man thank you for these Element videos. Really has helped us save lots of money being able to do our own repairs watching your channel.

@MS-hd8yq 3 жыл бұрын

Will never need to do this probably, but I watch because Eric is the man.

@ericthecarguy 3 жыл бұрын

Thank you!

@JW--dc8ri 3 жыл бұрын

Same, we don't even have a Honda

@IxIxColexIxI 3 жыл бұрын

Bill Burr mentioned you in the Mike Tyson podcast. Thats gotta be cool

@ericthecarguy 3 жыл бұрын

Bill Burr is my favorite person in the world.

@IxIxColexIxI 3 жыл бұрын

@@ericthecarguy its at 59 minute mark on the new hotboxin' with mike tyson video if you're looking for it. Congrats on the shoutout tho man this channel deserves it

@davidb.fishburn9338 3 жыл бұрын

Eric, you did not need to turn the key on to take the shifter out of park. There's a shifter override right there at the bottom of the shifter slot, that little panel hides a tab that you push to pop the shifter out of park, no need to even have the keys to do it. For those who are not aware, many cars now have an override of one type or another to allow the trans to be put in neutral. Mainly for towing with a dead battery, but it is also useful for when wheel alignments are done, since the car has to move a little on the alignment rack during the compensation procedure. Allows the trans to be taken out of park without having everything staying on and draining the battery. One thing i do like here is the easy access and replacement of the bulbs, much cheaper than having to replace the entire HVAC control panel. Many cars have leds in the panels that are not replaceable, which means that it can get expensive to replace the entire panel assembly.

@joegatz334 3 жыл бұрын

Had to do this on my Element and initially tried bulbs from other sources that didn't work out. I was surprised at the little differences in similar size bulbs; seems like they would standardize this. I love all of your Honda Element video's and Save every video you do. Please keep the Honda Element in your lineup. I don't naturally get my hands to dirty but with encouragement from you I enjoy the challenge.

@ericthecarguy 3 жыл бұрын

I wish I would have mentioned that in the video. Use of aftermarket bulbs or LED's doesn't often work out for repairs like this in my experience. As for more Element content, I'm actually giving this one to my brother soon. I'm not sure how much I'll see it after that. I have done a bunch of videos with it already though. Many are linked in the description. Thank you for your comment.

@maxwolf6285 2 жыл бұрын

Perfect ! I have a 09 SC with the shift bulb out. I watched this video in hopes that you would reveal a way to do the shifter. Boom ! You rock Eric. Thank you Now if I could just find a original rear hatch wing. The cool one.

@chkndnts 3 жыл бұрын

I had an 03 Acura RSX where the HVAC lights all went out...same bulbs used here. I decided I didn't want to spend $10 a bulb and instead soldered an LED w/ resistor to the contact pads for the bulb. Worked great and was an economical fix if you aren't squeamish about soldering

@panzerveps 3 жыл бұрын

I've never been a fan of the Element, but I have to say that it has aged well. Most car models from that era looks super old and outdated now, but the Element looks like it was released just a few years ago.

@Fenlandia Жыл бұрын

So happy to have a car I can actually work on again, these videos are super helpful, thanks!

@jorgeglez7112 3 жыл бұрын

Normally I do not comment, but I will make an exception: years ago my dad bought a 2004 oddysey (used and quite abused), most of the lights of the buttons no longer worked (including those of the a/c); here in Mexico they are quite difficult to find and too expensive at the dealer. To make a long story short, I changed them to led (mini led), I put a resistor in series and it worked. It's been 5 years now and they still work. Greetings Eric from Ciudad Obregón.

@ericthecarguy 3 жыл бұрын

Also, every time I go to the salvage yard I look for components like this to harvest bulbs from. I save the good ones for when I need them. I cut that part out of the video unfortunately. Thanks for the comment.

@MaximumDIYGarage 3 жыл бұрын

Very timely video, Eric! Thank you! Gotta replace these in my 06 CRV

@RandomGreymane 3 жыл бұрын

I did this for the gauge cluster bulbs on my 2006 Element but went with a pack of LED ones. About $10 from Amazon - I think a dozen in the pack. Only issue was having to flip the orientation 180 degrees if they didn’t light up - LEDs require proper +\- orientation or they won’t work. They don’t dim well but my eyes need the bright dash anyways.

@ScubaCat3 3 жыл бұрын

I learned my lesson on sourcing bulbs for my Toyotas - just go to the dealer parts counter. They cost just about the same as Autozone but they actually fit! 😁

@ericthecarguy 3 жыл бұрын

I would only recommend OE bulbs for something like this for that very reason. Thanks for the comment.

@ScubaCat3 3 жыл бұрын

@@ericthecarguy the sylvania brand just didn't quite fit and didn't even work when I finally jerry-rigged it in. Then the OEM slipped right in and came on no problem. Sylvania was $4.99 for 2 (only needed 1), dealer $3.02 for 1. Everyone - save yourself the trouble and go to the dealer LOL

@panzerveps 3 жыл бұрын

@@ScubaCat3 This is why I don't like aftermarket parts. Replaced the PCV on a friend's Audi, and while the part looked the same, it had some serious fitment issues. He checked with his supplier, and they confirmed it was the correct replacement part when he gave them the oem parts number, but gave in when he showed them pictures of the two parts side by side.

@pprkuts 3 жыл бұрын

Feels like my birthday every time I see a new video from you!

@markwilliams2620 3 жыл бұрын

Was going with the replace them all comment, but as usual you have it coverrd, Eric. Good show! To bad their proprietary and can't be replaced with LED's.

@wanderinggaijinnerd 4 ай бұрын

Thank you for the video, replacing the bulbs was simple and I also liked that you had the light bulb part numbers as well which was a great help.

@motorjed 8 ай бұрын

Thank you SO much for this - I just swapped mine out and it only took a few minutes thanks to you sharing. Much appreciated!!

@Perly53 3 жыл бұрын

Thanks as always Eric. Be safe. Take care! You've helped me out so much in maintaining my son's '03 element. Up next is adjusting the engine valve clearances.

@ericthecarguy 3 жыл бұрын

I have a video on that linked in the description. Good luck.

@eduardomartel1530 3 жыл бұрын

Hi erick the machine shop can do the valve adjustment with the head off the block? 2008 honda odyssey front head the guy tell me hi can fo that just i wanna make sure asking you thanks

@jorilarson4141 3 жыл бұрын

Have to do this asap been bothering me for a bit

@BruceRichardsonMusic Жыл бұрын

Thanks, man. This video was timely and perfect. Excellent tutorial.

@onefixitman 3 жыл бұрын

Always love your videos on so many different vehicles and systems.

@Sergeyrse 3 жыл бұрын

Man, thanks a lot. These there on my bucket list for a while, now after I saw you replacing them, I will pull the trigger on mine

@erichadler5737 Жыл бұрын

Bro, I am glad i found these video's. I just Bought and Element from my sister and it needs some maintenance.

@goodnewscruz 5 ай бұрын

This is great. Question, can you also do a video to replace the bulbs on the 3 dash gauges?

@handycrowd 3 жыл бұрын

Just done mine on the CRV. Even easier to get out, just the little cubby hole above the panel and you're at it. I used LED's, but you have to check they're all on before you put the screws back. It's a 50/50 shot at getting them the right way around and yup, I was exactly wrong on half of mine lol! Dont'cha love probability stats ;-) p.s. don't stuff it up, these units cost hundreds and hundreds of bucks new...

@jblyon2 3 жыл бұрын

The same happened to me when I replaced the instrument cluster lights on an old Corolla. A couple had burnt out so I decided to go for LEDs because why not. Exactly half went in the right way and lit up the first time.

@panzerveps 3 жыл бұрын

Get a multimeter, and check the polarity of the LEDs before installing. That eliminates the guess work.

@handycrowd 3 жыл бұрын

@@panzerveps Kinda, I didn't see any polarity marks on the panel though...

@handycrowd 3 жыл бұрын

@@jblyon2 I know right? I did 6 bulbs, of which 3 needed flipping :-)

@panzerveps 3 жыл бұрын

@@handycrowd That can be checked with the multimeter as well....

@613lcd 3 жыл бұрын

Thanks for this cause I have exactly this problem with my 06 element.......I proudly like to add I'm pushing over 322,000 miles, all me. I love My E. HONDA 😉

@johnathoncastro 3 жыл бұрын

I have an 05 element with 193kmiles....ive replaced radiator, struts,all mounts, starter,alternator,leaky oil pan twice, compressor etc....motor and transmission still strong and original.

@613lcd 3 жыл бұрын

@@johnathoncastro nice, sounds similar to my history lol. my next replacement is the rackinpin 😑

@Patrick94GSR 3 жыл бұрын

375,000 on my 94 Integra GSR, original engine and gearbox!

@613lcd 3 жыл бұрын

@@Patrick94GSR yeah Hondas are great 👍👍

@johnathoncastro 3 жыл бұрын

@@613lcd have you replaced the catalytic converter and O2 sensors? I just left the shop with a check engine light stating problems with the cat. im not noticing any bogging down or anything. the car runs great.

@fallbrookdave 3 жыл бұрын

Thanks for the Element videos. I have a 2007 with 250k and love it.

@waxingchandler3895 3 жыл бұрын

09 with 246K and still going strong!

@raymundocarlos5790 14 күн бұрын

You Make All This Look Easy

@edpewalkee 3 жыл бұрын

Dude Im driving cross country and the HVAC light went out on my Element LAST NIGHT. I was like, well thats just awesome. Open my cpu at a hotel in Flagstaff this morning and this is the first video that pops up. Either Gods real or we live in the matrix.

@ericthecarguy 3 жыл бұрын

That's pretty cool. Sourcing the parts is probably the hardest part of the job. Thanks for the comment.

@Vancouversour Жыл бұрын

Most impressive part of the video is how you were album to pull that bulb out with one hand so flawlessly. I can’t get it out for the life of me.

@nighthawkj30A4 3 жыл бұрын

Did this to TCS and Sunroof and Seat Heater bulbs. On my 7th Gen Accord

@dtoaain 3 жыл бұрын

Love Honda element content!

@elexisdorsey670 5 ай бұрын

Just followed your directions, thanks! Super helpful ❤

@austinpfoster 3 жыл бұрын

Well, I may have to finally get to replacing the bulb for the seat heater switch in my TSX.

@Kizzle001 3 жыл бұрын

I’ve done that a few times, very easy to do on a first gen TSX anyway.

@NuMooX 3 жыл бұрын

Cool. I need to do this for my Camry.

@Pantherman1979 3 жыл бұрын

I had to replace the bulbs in my 08 Odyssey climate controls. I elected to go with LED replacements rather than bulbs; took awhile to get all the LED's polarity right so they'd light up. But now I won't have to worry about it for a long time.

@danstephensen9032 7 ай бұрын

PROBLEM SOLVED. PROPS TO YOU, MY BROTHER.

@memathews 3 жыл бұрын

Excellent! My Element has a half dozen dead bulbs now also it's time to replace them all. Also, the factory stereo has intermittent operation, mostly just the aux/mp3 connection works, I'm thinking a cable is loose.

@jaydee3046 3 жыл бұрын

Great video, and reminds me there are some designers with some sense still out there. My 06 commander does not have removable bulbs. Once the bulb goes, you are supposed to replace the entire panel. To get to the panel requires pulling the dash and shift console bezel.

@ericthecarguy 3 жыл бұрын

That's unfortunate.

@SmittySmithsonite 3 жыл бұрын

Our '93 940 has strange, model-specific bulbs like that. Not on a stick, but they're tiny, oddball pieces. Reminds me of micro-sized Christmas lights, lol. They last a LONG time, though. I've only replaced 3 in the nearly 7 years I've owned the car, all when I first bought it. The rest could be original for all I know.

@panzerveps 3 жыл бұрын

I had to replace the IC bulbs in my '85 Audi 80, and according to the dealer (that I worked for) they were no longer in production. Checked with a friend of mine, who works for VW, and the exact same bulbs were still in production, but with a VW parts number... They even had a few in stock.

@MrStanwo 8 ай бұрын

Thanks Eric.That was very helpful.You Rock man!

@OxbowSummer 2 жыл бұрын

Hi Eric. Do you know what bulb is needed to replace the one that illuminates the hazard switch? Thanks for a great video!

@ssola7045 22 күн бұрын

Try researching Honda OEM Bulb 35871-S3N-901

@ronwatson4902 3 жыл бұрын

I like a quicky every now and then.Thanks

@johnathoncastro 3 жыл бұрын

how do you replace the Flux capacitor bulb?

@grassroot011 3 жыл бұрын

First go get some blinker fluid,, then ,,,Oh wait, you make sure you have a DeLorean?

@Perly53 3 жыл бұрын

It can only be done if you transport yourself to a particular year. I'm just not sure what year that is. Good luck.

@MrSamPhoenix 3 жыл бұрын

We’ve done this to my little brothers 2007 Acura TL. We did it with LED versions instead of the original incandescent bulb versions.

@charleslounsberry442 5 ай бұрын

thank you Eric !!!! looks easy even for me!

@1hjehje 3 жыл бұрын

An excellent video …. Thank you!

@carlosramos2228 3 жыл бұрын

Miss these kind of videos

@ncfatcyclist 3 жыл бұрын

Oh yeah ! Great info 👍😎

@HotRod-wv4vm 2 жыл бұрын

Thanks Eric my hazard switch bulb on my 04 Element just went out

@southernautodiy2643 2 жыл бұрын

2:35 "Bulb on a stick" reminds me of José Jalepeño on a steeeek lol

@amo757 3 жыл бұрын

Very helpful, thank you.

@HouseCallAutoRepair 3 жыл бұрын

Thanks for the ideas... ;)

@andyehrens9873 3 жыл бұрын

Honda charges a small fortune for these bulb/sockets. You can also get just the tiny bulbs on ebay, maybe Amazon. Take the old bulbs out of the socket by bending the fine wires that wrap around the socket base and then slip the new bulbs in. I've done this on my CR-V and Accord. Works great - just check for the right bulb size, brightness and color before ordering.

@Mrxdyuxd 3 жыл бұрын

Had to change my Honda Fit/Jazz G2 AC controls light, was a nighmare had to take almost the whole dash apart, changed all the bulbs to led.

@TheChaps83 3 жыл бұрын

Last time I put a LED replacement bulb to my car (cigarette lighter) it last way less longer than 1,2W bulb lol

@elab8461 3 жыл бұрын

Thank you Sir for sharing this👍

@SaberusTerras 3 жыл бұрын

The shifter bulb looks like a white Christmas tree lamp, just without the nub at the end. Surely they aren't compatible, but the similarity is notable.

@HM3FMSS Жыл бұрын

Thank you for your tutorial.

@johngrant1337 3 жыл бұрын

Good video

@AntonioClaudioMichael 3 жыл бұрын

Nice work @EricTheCarGuy

@heavyicerx 3 жыл бұрын

Thank you, Eric!

@Madmike772 3 жыл бұрын

Genius automotive design engineer win.. if only they all were that convenient. Haha

@Amazingmotivations 3 жыл бұрын

Honda simplicity 👍

@brianmedeiros3781 3 жыл бұрын

Awesome video Eric !!!!!

@shootr04 3 жыл бұрын

Awesome. I have a couple burned out bulbs for my heated seat switches in my 04 Accord, I’m assuming this will help! Thanks Eric!

@VileMisanthropy 3 жыл бұрын

Remember when ErictheCarGuy sported long black hair and a goatee? Times have changed.

@peacock7708 3 жыл бұрын

-Yeah! ELVIS is alive!!!! - We all knew it.

@porCristo777 3 жыл бұрын

Good information!my friend have a 2003 Honda Element. There is no leaks but the is loosing oil. Do you think is a head gasket. I forgot to mention. The coolant is always low .

@lakespeed 3 жыл бұрын

Yesssss, I need to do this on my element, thank you.

@wobblysauce 3 жыл бұрын

Not just replacing bulbs... but with a mist of paint, you can dull them down as well as some are really bright with no control

@AntonioClaudioMichael 3 жыл бұрын

My mother's 2005 honda crv always aggravates me with the blower motor off and ac not in use air always comes through the vents its frustrating if people want air they wouldn't have the system off have you seen this problem on crvs as well as other Hondas Eric @EricTheCarGuy

@PhillyDee215 3 жыл бұрын

Simple jobs are the ones u only need one tool😉

@applepietech Жыл бұрын

Thank You for Your video! You have part number for the dial bulb a little wrong in your description. It’s 79629-S3V-A01. Love my element :)

@claycook2723 3 жыл бұрын

Great video unusual looking bulbs.just like Honda to have something that takes a special Honda part.Clay

@ericthecarguy 3 жыл бұрын

So true.

@Nick-wk2xo 3 жыл бұрын

Have to do the same on my 06 Mazda 3. Except nowhere near as easy. The temp and fan direction are cable controlled, in tight quarters

@julianarodriguez3635 3 жыл бұрын

Your the man eric

@Bot.number.69420 3 жыл бұрын

I was boring and soldered led in there 7 yrs ago.

@ericthecarguy 3 жыл бұрын

I don't recommend the use of LED's for a repair like this as I've often seen that cause issues, especially with the dimmer function. I wish I would have mentioned that in the video. Thanks for the comment.

@sherannaidoo2712 3 жыл бұрын

Been a while since I watched your channel. Nice beard mate.... Good content too....

@ericthecarguy 3 жыл бұрын

Thanks for watching!

@RebelliousHutterite2 2 жыл бұрын

Thanks for the vid! Looks like the correct item number for the dial bulbs is actually "79629-S3V-A01" rather than "79629-SV3-A01" as mentioned in the description?

@yonofuni 2 жыл бұрын

what size is the hazard switch bulb?

@brianglenary 2 жыл бұрын

Thanks - Easy and Quick instructions ! Love the video

@MaikEletrica 3 жыл бұрын

Very nice Eric!

@nunjabyasniz9491 2 жыл бұрын

Hi Eric, the dial bulb part number is 79629-S3V-A01, small typo in your description.

@vijayantgovender2045 3 жыл бұрын

Thank you Eric you look at your local spare store for the bulbs they should be cheaper I am from South Africa

@ericthecarguy 3 жыл бұрын

I don't' recommend that. Fitment of aftermarket bulbs isn't that great, not to mention they have different resistance values that could screw other things up. I'd recommend OE bulbs if you were doing this job for best results.

@vijayantgovender2045 3 жыл бұрын

@@ericthecarguy thank you for sharing your advice Eric I am from South Africa

@TreyCook21 3 жыл бұрын

Need to do this on my Subaru's cluster. I don't know if it's difficult, but I'm not looking forward to it.

@cybercamba 2 жыл бұрын

Thank you for your videos...you are a truly MVP!

@gideonwashere 6 ай бұрын

Thanks! Is it possible to replace the factory wiring to the stereo? Mine was cut before I got it and I would like to avoid splicing it back together if possible.

@TratzPatratz Жыл бұрын

Came here just to see how to do this. I just bought a 2008 EX-P and the fan speed light is out. question: worth swapping all the bulbs out to LED style bulbs? and if so, which ones would you recomment? 2nd stupid question: are the CH / Vol / Mode / RES accel / Cancel / Set Decel buttons on the steering wheel supposed to be illuminated?

@kennethcooper1846 3 жыл бұрын

Mannnnn wtffff!!! I never even knew they lit upin my Element! For the longest time I have been saying why tf didnt Honda make these light up 😂😂😂

@thomasrossi31 3 жыл бұрын

I’ve replaced similar bulbs on my old Ridgeline... they’re expensive for what they are. $7 - $8 each if I remember correctly.

@bradenwuesthoff5639 3 жыл бұрын

Dealer markup

@panzerveps 3 жыл бұрын

Probably because they are specialty light bulbs. Would be way cheaper, if they were ordinary household light bulbs.

@joesatosa4792 6 ай бұрын

Thanks

@johnwesterman 3 жыл бұрын

12 vdc LED replacements available? They should last "forever". Surprised to see incandescent bulbs.

@ericthecarguy 3 жыл бұрын

I don't recommend the use of LED's, or aftermarket bulbs in this application. I've seen them cause issues, especially when it comes to the dimming feature.

@Drives31forhalo 3 жыл бұрын

I'm not sure how cheap those honda bulbs are, but when I tried to buy bulbs from Hyundai they wanted around $10 per bulb. I found you can actually buy _just the bulb_ for < 50c (I believe I got mine at bulbtown) and put it on the old socket pretty easily. I just bought them in bulk and did every single bulb in both my Hyundai and Subaru to get it over with.

@bruceomlor7761 Ай бұрын

THANK YOU!! Can you get these bulbs from Auto Zone?

@kingcarcas1349 3 жыл бұрын

Seems easy but sometimes the plastic won't align right after u do something like this. I need to figure out what i did to my dash lights, years ago i replaced them with some bulbs from ebay and jacked it all up. That D bulb on the shifter was a PITA on my Accord, also for the ones on the dash I just put the old "1" Bulb in the D4 slot and vice versa, since who uses D1 anyway?