Honda k20 k24 Oil leak Fix DIY

Рет қаралды 20,049

3 жыл бұрын

Replacing my Honda vtec spool valve gasket and oil pressure switch on my k24a/k20z3 engine. Enjoy
If you want to buy...
* OEM Honda Manual trans fluid: amzn.to/3vDedXl
* LED vehicle lighting-Discount code: Gerb10
lddy.no/b3ur
My Instagram: / gerb_productions
#honda #civicsi #crypto

Пікірлер: 115

@TheGerbsteve 3 жыл бұрын

* Need auto LED lights? Discount code: Gerb10 lddy.no/b3ur

@YamaHondaGarage 3 жыл бұрын

Man I haven’t owned an 8th Gen in 2 years and I still enjoy your videos. Keep up the good work.

@TheGerbsteve 3 жыл бұрын

Appreciate that! What are you driving nowadays?

@seandsicko.1028 2 жыл бұрын

Ur vids rlly help me fix my car cuz I run into the same stuff. Thanks again broski

@paulescoto9181 3 жыл бұрын

🔥🔥🔥🔥Welcome back Gerb missed your wrenching videos brodi 💯

@elguiyot90 3 жыл бұрын

Nice Job Gerb!, thanks for show how to chabge the Vtec Gasket !

@dmelt8706 3 жыл бұрын

Been waitin on this vid for a while.

@dafb6dafb62 3 жыл бұрын

Hell yah I’m glad you got that fixed 💯

@edsongarcia7370 3 жыл бұрын

always a great video gerb! same issue with my k24, oil pressure switch going to be doing same !

@TheGerbsteve 3 жыл бұрын

Thanks man 🙏🏼

@tylersimms6020 3 жыл бұрын

Love me some Honda bond 💯 Fixed my R18’s oil leak coming from the timing chain tensioner and was driving it 3-4 hours later. Best RTV out there.

@TheGerbsteve 3 жыл бұрын

It is by far the best and only thing I use on my Honda 🤙🏼... Glad your r18 is fixed

@Ehren1337 3 жыл бұрын

permatex ultra grey rtv works fine too.

@Jimux 3 жыл бұрын

Another good way I found to change the oil filter without making a mess on these engines is to use a piece of tin foil and bend around the axle boot and another piece on the back side of the engine in front of the axle boot. Tin foil are cheap, easy to bend in shape and oil would just slide right off and into the drain pan underneath

@jbaccord 2 жыл бұрын

They actually sell something that’s called a flexible funnel, it’s a life saver! But I like how you were creative to get some tin foil for the same purpose as the flexible funnel ! 🤞🏽

@lesu_san2663 3 жыл бұрын

Bro I love your videos, thank you for always wrenching 👍

@TheGerbsteve 3 жыл бұрын

Thanks for all the support

@Ehren1337 3 жыл бұрын

thats another reason why i stick to 90s civic because they have so much room around engine. you can literally see vtec solenoid and everything on back by standing near fender. whole k series longblock is like 6 inches or 1ft away from firewall.

@shawnmarques7117 2 жыл бұрын

I have an fa5 k20a2 head k24 a2 block type s oil pump made a huge difference.

@TheGerbsteve 2 жыл бұрын

I'm going to send my k20 head off to the machine shop over the winter. Still may order a pump too

@dailycivicsi9295 3 жыл бұрын

Keeping midnight happy

@TheGerbsteve 3 жыл бұрын

Trying too, so she takes care of me 🙏🏼

@dailycivicsi9295 3 жыл бұрын

@@TheGerbsteve true story man

@byJacobx 3 жыл бұрын

hey man I been watching ur vids for a year or more and I had eyes on getting an si for a long time.....you and other people on KZfaq Nd seeing people rolling around in my city made me buy one finally. I also swapped a k24a2 in my fg2. I have some questions about this car that maybe you could answer or offer advice about. What Is the best way to contact you thru email or instagram? and I ain’t tryna be annoying I just would like to learn more and everything I can about building this car and obviously the goal is go forced induction in end. You are very knowledgeable and great at explaining shit .Thanks bro keep up the videos as they help out a lot!

@paulo..ferreira 3 жыл бұрын

Hey! Thanks for all your videos! Invaluable stuff! Let me ask you mate, where is the engine coolant sensor 1 located in the K20Z3? Other than the radiator bottom one. Thanks!!

@inline4s4lyfe53 3 жыл бұрын

I litterally just did this Sunday too! It's a pain! I don't want to do this again lol

@TheGerbsteve 3 жыл бұрын

At least someone can relate to what I went through lol

@mariolevicy3073 2 жыл бұрын

Lmao

@jimmyyking 3 жыл бұрын

Happy for you. 👍 by the way, do you do anything to preserve the paint/clear coat? My si has been non-garaged for about 8 years now and the roof clear is trashed. Just thought I’d ask, assuming midnight isn’t garaged?

@RishMedia 3 жыл бұрын

Just did a video on this not long ago, had a little slit on the bottom gasket

@Loudcivic03 3 жыл бұрын

i had to plasti dip my hood and trunk yours still looking good. AMS is the best, there trans fluid made a big difference for me.

@Onelovej 3 жыл бұрын

💯 Keep wrenching

@TheGerbsteve 3 жыл бұрын

Coilovers and maybe supercharger coming soon 😎🤙🏼

@Onelovej 3 жыл бұрын

@@TheGerbsteve oh man that would be hard!!! I got that k20 head on the tsx just need a tune but still rips!!! I’m going turbo Eventually but super charging would be so much easier seems like

@mrcease211 Жыл бұрын

Might as well change the oil pressure switch If you take out the cowl around the windshield it’s easier to reach it from the top

@ogdom1809 3 жыл бұрын

Yoo my k24a was leaking too !! It was my vtec solenoide gasket😅

@TheGerbsteve 3 жыл бұрын

Damn, common k24 oil leak issues lol

@evoiv98 3 жыл бұрын

awesome vid GERB! keep it up! Always us hondabond for the oil pressure switch never use Teflon it can still cause leakage but also risk cross threading fine threads in that location. Also how many qrts of oil you use? I find that my k24 swap fa5 takes about 5.5q

@TheGerbsteve 3 жыл бұрын

Thanks for the info! Mine uses about 5-5.5 qt. K24 seems to take slightly more being larger displacement and taller deck.

@IdrisFashan 3 жыл бұрын

My solenoid gasket is giving me issues too. K24Z3 TSX. Booking a bay for the end of the month to put a new cylinder head on, so I’m gonna wait until then. It’ll feel like an eternity though! VTec won’t kick in, yo! Not until July... 😆

@TheGerbsteve 3 жыл бұрын

Never any fun without vtec kicking in lol

@thatguyben3128 3 жыл бұрын

🔥huge effort Bro 💯🔥 👌🏼 ... but I still want to see the hidden footage where you were cuss’n 🤣🤣🤣

@TheGerbsteve 3 жыл бұрын

He already knew 🤣🤣... There were some words that were said during the process, especially getting the spool valve back on haha

@thatguyben3128 3 жыл бұрын

@@TheGerbsteve omg Bro 😭 you were so controlled 👌🏼💯

@thebanditsix 2 жыл бұрын

Lining up the VTEC solenoid to find the bolt holes is so frustrating, as I found out.

@theloniuslennan6521 Жыл бұрын

I got a p2646 code. Vtec oil pressure switch circuit low voltage. Going to check the solenoid filter gasket. Not sure if I should replace my oil pressure switch. Have found a lot of conflicting fixes and mainly for k24 not k20z3. I have an 07 si

@adamholtz1675 3 жыл бұрын

Wrap teflon tape around the oil pressure switch for 100% worry free leak. However mine on the 2011 civic si black coupe just leaked random like a faucet weird as can be almost destroyed my motor ha rubbish not sure why it leaked internal for.

@charliedc00 2 жыл бұрын

You do know you can run pennzoil ultra platinum synthetic don't you? It's just as good 👍

@Jaylyons1 3 жыл бұрын

I’ve got a small leak around that area. I may be feeling your pain this weekend! Did your leak get resolved?

@eghatchsosa Жыл бұрын

Does the jdm k24 sit lower then the k24a2.?? 🤔 I have a k24a2 and can't fit the shield that goes under the wiper cow.

@thegame8791 3 жыл бұрын

Nice to see a wrenching vid. If you Supercharge Midnight that would be insane. Great Vid Bruh. Never Stop Wrenching.... 🥃

@TheGerbsteve 3 жыл бұрын

I miss wrenching sometimes.... I agree, nice 400hp beast lol. Thanks for the support

@thegame8791 3 жыл бұрын

@@TheGerbsteve You're Welcome!

@stickboyfpv4742 3 жыл бұрын

Gerb... If you dont have any amc BUY A STOCK OF AMC TOMORROW ASAP..

@TheGerbsteve 3 жыл бұрын

I have about 20 shares man. Why, what you think the price will be ??

@edwardinvegas 2 жыл бұрын

Search up this part number: VSB02C000033 (Honda OEM Part used at dealerships) this is the oil deflector you seek for the crappy filter location. I use it and it works great on my 2007 Honda Civic Si. K20. Let me know if you have any questions. There is a hole at the top of the deflector that sits on a metal corner (on the car) to hold it in place.

@jf8322 11 ай бұрын

Anyone figured out the leak on the driver side back side of motor

@Carshows224 2 жыл бұрын

Hey Gerb do you trust the Amsoil signature series’s to go the 25k or 1 year in your kseries? If so y so? If not y not? I’d think you’d like to get your money’s worth because Signature series is pricey!

@TheGerbsteve 2 жыл бұрын

No, especially with the way i drive. I can see 8k, maybe 10k being more logical. Still change my oil every 6k though... I'm ocd with that lol. You have to think, if you constantly rev or race means increased rpm = more heat and imo will break down oils faster, making them dirtier.

@LeeVai666 3 жыл бұрын

someone get this man some hasport mounts!!!

@TheGerbsteve 3 жыл бұрын

I have a bottom hasport mount, just have to install her 😎

@LeeVai666 3 жыл бұрын

@@TheGerbsteve hell yeah! that rear mount is a pain, enjoy the struggle lol

@christianvaca4675 3 жыл бұрын

Great viodeo gerb.. How tight did you do the presure switch

@TheGerbsteve 3 жыл бұрын

Thanks man. I just did hand tight with the deep socket. Seems to have fixed my oil leak 🤙🏼🤙🏼🤙🏼

@christianvaca4675 3 жыл бұрын

Thank you for the response.. Gerb.. I plan doing that next week

@Nexttime 3 жыл бұрын

Yo gerb did you put spacers on the rear motor mount bracket? I thought I saw washers on them.

@TheGerbsteve 3 жыл бұрын

Yeah, did a little mod

@Nexttime 3 жыл бұрын

@@TheGerbsteve How many washers did you put on each bolt?

@CiviCNou Жыл бұрын

would the k24z7 be in the same place for the oil pressure switch?

@vtecbrown Жыл бұрын

Same spot, yes

@alanlow7649 3 жыл бұрын

my civic keeps going through aftermarket starters, i just put in a new aftermarket one in but i’m scared it’ll go out like the last one

@TheGerbsteve 3 жыл бұрын

Sounds like you may have some sort of electrical short

@Hello_its_me_mario 2 жыл бұрын

How bad were you leaking? I have a leak also but can't pin point it. I change the gasket to vtec solenoid already.

@TheGerbsteve 2 жыл бұрын

It seemed bad, but it never left drips on the ground. I'd say half/quart every 5k miles.

@commentmancommentman1658 3 жыл бұрын

Sup gerb

@TheGerbsteve 3 жыл бұрын

Sup man

@45AcpG30 Жыл бұрын

Bro did the leak ended up stopping after these repairs?

@TheGerbsteve Жыл бұрын

Unfortunately not

@alexanderhasenzahl8201 Жыл бұрын

WHERE ARE YOUR JACK STANDS???!

@alexanderhasenzahl8201 Жыл бұрын

Ok, ypu added them later

@alextroutyogurt6459 3 жыл бұрын

Gerb you are the fucking man!!! Midnight JR just recently went into limp mode, pulled codes with hondata and pulled code p2647 Im waiting for the dealership to open back up so I can order a new solenoid, But do you have any recommendations on that specific code? I honestly just the other day was browsing through your videos hoping you had one where you took apart the vtec solenoid and todays the day!!!

@dylon8425 3 жыл бұрын

How many miles your si have?

@alextroutyogurt6459 3 жыл бұрын

@@dylon8425 bout 174k

@dylon8425 3 жыл бұрын

My k20 is at 175k too. Ik these cars burn oil n stuff, but I’d like to do what gerb did in this video,(preventative maintenance. Do you have any idea what happened when that code came up?

@alextroutyogurt6459 3 жыл бұрын

@@dylon8425 Yeah that high of miles im running a little thicker oil... but The car went into limp mode with a check engine light, vsa light came on and it wont go past 4000rpm it just cuts right off... so im still in the process of waiting for the honda dealership to contact me back about a rear passenger trailing arm why what is yours doing?

@TheGerbsteve 3 жыл бұрын

Hahaha, thanks man. Personally, I'd have to look it up first to give you any advice. Hopefully yours is just a clogged screen or something small. Hope my vid helps you out

@jesspher25 2 ай бұрын

Did it fix the leak issue?

@TheGerbsteve 2 ай бұрын

Unfortunately, it didn't

@jesspher25 2 ай бұрын

@@TheGerbsteve did you ever find the source of the leak?

@billythetaco6002 2 жыл бұрын

Wheels ?

@TheGerbsteve 2 жыл бұрын

Xxr 527’s

@joeymcquilkin3670 2 жыл бұрын

So did it fix it or what?

@TheGerbsteve 2 жыл бұрын

For a week lol

@joshua0.34 3 жыл бұрын

Why 6 quartz? Dont the k series only take 5?

@TheGerbsteve 3 жыл бұрын

5 quarts in engine, 1 quart for back up if I need to add

@PatilsNinad 3 жыл бұрын

@@TheGerbsteve Hi Gerb, I just changed engine oil on my FA5 for the first time watching your previous video. I put 5 qt and the oil is still just above the bottom dot on the dipstick. Wasn’t sure if I should add more. But I think total 6 qt is required. Thanks

@joshua0.34 3 жыл бұрын

@Bryson Hudson i get what you mean lol but 5 is good enough bro. Overfilling could cause the crank to start making the oil foam and youll soon need a swap

@alextroutyogurt6459 3 жыл бұрын

@Bryson Hudson haha the truth.. I felt like mine burned up .4 of a quart just starting up after an oil change im like why isnt this shit showing up on my dipstick haha

@fuckbeingbroke2 3 жыл бұрын

AMC stock bro for more mods, videos, 💰 ams oil etc WE Ape strong 🦍🍾 In the future our crypto will bless us I hate leaks too always fix them quick Honda For Life Egb18b1 Fg2k20z3

@TheGerbsteve 3 жыл бұрын

I bought some AMC ;).. Wonder what the price will go up to? My favorites are BTC, Eth, and a few others. Lets goooo! Honda for life, k series for life, all chassis

@krayzie281 3 жыл бұрын

6 qts??

@TheGerbsteve 3 жыл бұрын

Sure is

@krayzie281 3 жыл бұрын

@@TheGerbsteve 2 for you or what? Lol you flush with the 2? Cuz both my k24’s only take like 4 qts lol maybe that’s why you got an oil leak bro you putting too much oil in my boy

@TheGerbsteve 3 жыл бұрын

@@krayzie281 may want to check your engine recommendation. K20’s take 4.7, so how are you only adding 4 in lol. Sounds like you’re not putting enough in my dude, but good luck.

@krayzie281 3 жыл бұрын

@@TheGerbsteve mine both take 4.5 and so far so good 170k on one 97k on another 💪🏾