Replacing the Gasket on the rear Valve cover after around 63km that NTV has run. And while I was fixing one thing, I created another problem... Definitely watch the video if you need to work on the Valve Covers!
Пікірлер: 40
@memybikeni9931 Жыл бұрын
Good job it wasn’t the front cover gasket, that looks a lot harder to service. I have a year 2000 NT650V so slightly different shape and styling, but so far experience tells me it’s a pain to do basic things on. Good video, thanks.
@meoffjack Жыл бұрын
For the front cylinder you have to drain the cooling liquid and remove the radiator. Not a big problem at all! 😉😉😂😂🤜🤜
@memybikeni9931 Жыл бұрын
@@meoffjack also, thank you for the English subtitles 😊
@meoffjack Жыл бұрын
@@memybikeni9931 😅😅👍👍
@harrykuntz8786 жыл бұрын
great video its very helpful to me thank you very much I have main gasket but thanks to you I now know I need to buy the two small seals and washers . it is for my faithful transalp 600 I used to own a ntv 650 before just like your one it impressed me so much I bought a transalp as my roads are not very good and I can now ride in the forest but the wheels corrode and its got a drive chain . over all I think the ntv is the better bike I would love another one with low miles like new but they are getting harder to find at any price .
@harrykuntz8783 жыл бұрын
After a couple of years of being without the transalp 600 . I have just bought a 2003 deuville 650 . It's it's low miles and beautiful in silver . I pick it up in 5 days I can't wait . Thank you again for this very helpful video .
@kkzkkzp5 күн бұрын
@@harrykuntz878old love not rust…
@tombock16864 жыл бұрын
Klasse Video, hat mir sehr geholfen. Sei bedankt, wir grüßen uns auf der Straße.
@andreavigliotti10287 ай бұрын
Hello, thanks for the beautiful video, could also post the honda part numbers of the replacement parts (gaskets, seals, etc)? many thanks again!
@pedropinheiroaugusto32203 жыл бұрын
"Oh, I did this job last year. New gaskets for the bolts? Ooops..."
@meoffjack3 жыл бұрын
Yep, everything new.
@garccful7525 жыл бұрын
cool. Hello from Russia. Great bike, I have bros 400👍😊
@meoffjack5 жыл бұрын
Nice! :)
@richardballinger5175 жыл бұрын
Having done this with one of my NTVs and about to do it to my other, did you take your air box lid off and filter out to reseat the carb inlet rubbers cause you didn't in the video and I know from experience of doing valve checks on both of mine they can be pigs to get back in?
@rakonrad4 жыл бұрын
I did this today, he obviously forgot! 🙄😊
@hairyneil4 жыл бұрын
Working on my Deauville just now, I was wondering about that, "surely you can't just shove that on top and the rubbers put themselves back in?!" I thought taking the filter out would be the answer, ta!
@riverthecat4 жыл бұрын
Beautiful motorcycle
@rene36463 жыл бұрын
Thanks for this!
@meoffjack3 жыл бұрын
You are welcome.
@ZloyDedBaraded5 жыл бұрын
Great video! Thank You Very Much!!!
@mariusdorin97726 жыл бұрын
I would really like to see the gasket replacement for the other cylinder. The damage that was done with the cooling system was linked to that metal tube next to the cover? Thank you.
@meoffjack6 жыл бұрын
For the front gasket replacement you have to remove the complete cooling system which is a pain in the ass and I only had a leaking rear gasket. If at one point the front one starts leaking too, I will make a video about it. Yes, that metal tube was the cause of the leakage. Well, the seal on it was. But now everything is fixed and the bike is running great ever since. If in the future I have to fix something else, video is coming.
@grongomannaro6 жыл бұрын
Good Job and very nice Bike 👍
@jeroennijsen70054 жыл бұрын
question: should you drain engine oil & coolant before replacing this gasket? My NT 650 GT Hawk needs a new one as well..
@whiterazer14 жыл бұрын
Dit is niet nodig. Als de motor koud is, zakt de olie naar beneden. Koelvloeistof mag ook gewoon erin blijven.
@mariusdorin97726 жыл бұрын
Ok. Now I saw your other video "water pipe seal replacement". One more question, where did you bought the gasket? Thanks.
@meoffjack6 жыл бұрын
Yes, in that video you can see the old and worn out seal which went bye bye.
@meoffjack6 жыл бұрын
I bought all the parts here: www.bike-parts-honda.de
@aleksandrrezkiy6966 жыл бұрын
Thank you for the video!Continue to shoot video.
@meoffjack6 жыл бұрын
thanks for the feedback! Everything I do on the NTV will be recorded and put on KZfaq. ;)
@aleksandrrezkiy6966 жыл бұрын
Good luck to you.
@danv61494 жыл бұрын
Hi stripped a valve cover bolt what would you suggest thanks.
@meoffjack4 жыл бұрын
Can you get to the stripped bolt with a drill?
@danv61494 жыл бұрын
@@meoffjack thanks for the reply I managed to drill it and rethread with a Heli coil.
@meoffjack4 жыл бұрын
@@danv6149 That's good to hear. Nice that you got it fixed. ;)