Hi Paul & Kathy. We got a little touch of old man winter on Friday, about 10 cm worth. I like those lights on the snowblower. May have to do that with mine. You must like not having to get up to blow snow commercially anymore early in the morning eh! Regards to you both. keep up the fine work.

Thanks Paul, little surprised to hear you were not moving snow commercially this winter but maybe you'll have a little more time for fun things and videos. I'm betting there will be a Keurig on that snow blower by the week after Christmas.

Good morning Paul! I will tell you that beautiful snowblower is going to be so fancy to use!!!! I hope you finally get some use out of it. My question is. I purchased honda HS724TC. I would like to get the auger housing extension which you have on your sexy machine. Back home here at the Power House Dealer in Barrie Ontario have no idea what I am talking about. Paul I know your busy but would you have a part number for the Auger housing extension. I know in asking a lot but if you can't help me then I can't start blinging out my beauty. I hope you know that everything you have done is special and most of all tasteful with nothing but safety in mind. With all the snow we get the extension is a must. Please help. Your the best. Please say hi to your wife for me and thank you for all your help! Travis

What no heated grips or heated coffee mug holder! Gotta have the Tim Hortons!

Nice video Paul... I bought one of those calipers too :) Would be good if you can put together a video on grease guns. I have a compressor driven one and have had trouble with it off and on perhaps mainly from not knowing the details of its operation.

Now all you need is hand warmers and a coffee pot on the blowsnower and it will be good to go! lol

Wow the lights are Bright. We shop at both Stores. I like the mods too.

Another great video Paul.

Paul when you do the wiring for the LED lights can you show a little more how you wire it and how you run the wire through the machine and to where. Thanks

Paul, I got a brand new honda snowblower for my walkways! not as nice as yours but does the job.

Lol ! You are wearing the same sweater that Kathy made me !

Nice well-built machines, parts are horribly expensive.

It's a Iron Workers wrench.

Thanks for the video.I have a Honda HS928 snowblower.Great machine.Trouble free for 14 years now.

Paul, I can't begin to thank you for your shout out and the very kind words regarding my work. You have certainly inspired many of my projects and your encouragement today was such a blessing. God bless and take care.

Paul - After two weeks on the road I finally got a chance to catch up with Specialty Repairs activities. Very cool to have a bunch of your vids to enjoy. I always enjoy the mods and your approach to each situation. Of course your craftsmanship is a real treat. Thanks so much for sharing your skills with all of us.

Thats such a badass snow blower haha. Do you ever have issues with those lightbars fogging up? I hear they dont give off heat so they fog easily

I told my wife if she ever leaves me I'm going with her. Always happy to see another video posted. Thanks for sharing and happy trails.

Hello Paul, I greatly enjoy your videos and ideas. Here's a thought: for added "mod factor" consider an LED inside the snow blower chute to light up the plume with colored light. I got this idea from water ski boats that run a "wake flame". It lights up the water under and behind the boat...even in daylight.

Paul, I like those lights on the snowblower I think if it were mine I would point them forward and to the side that way when the neighbors cat come running across the yard you'll see it coming,,lol Take care and keep the videos coming always a pleasure to watch.

Hi Paul Is the limit switch on furnace working ok. I thought fan should run longer than 3-5 sec to cool heat exchanger.

Sorry Paul I didn't get the part number from you.

Could you add a parts list for your upgrades?

Thank you Paul and Kathy for the great video. Always nice to learn a few more things. I'm pretty sure you'll get your share of snow before the '14/'15 season is over so not to worry, the "blow-snower" will get it's use. I can't wait to see if there will be any bugs in it that you will have to fix. Seems there is always "bugs" to work out. Hope you two are enjoying your week-end. God Bless and take care... Levi~~

Good video

Another great video Paul and Kathie !! But I got to tell you Paul I got the biggest kick out of what you said when you were ripping open that box "I could go get a knife but that's 4 feet away " LOL Sounds like something Id say :) Take care God Bless

Paul, is this a Honda part no. or after market add -on

Hay paul that spud wrench is for ironworking i know that becuse im going to school for it and i had to get my own tools and belt

picked up one of those Spud wrenches myself, going to be putting up a new steel building soon and I figure it will come in handy. Another great video.

Paul, where did you get the black front end extension?

Another great one, thanks Paul for sharing........

Nice

I had a Honda snow blower just like the one you have in this video. I called it my tank snow blower as if it could not go through the snow bank it was going to go over the bank.

Paul, 2 things I wish I had here in WV is a Specialty Repairs and Princess Auto! My wife may never see me again! lol

Very cool. Love that 928 Honda blower.

Where did you get the camera you use when ur plowing

Hi Paul. Sorry to bother you. Who manufactures the auger housing extension that you have mounted to your 928? Thanks

Just finished the video Paul !! Another awesome video ! Love that honda snowblower ! My grandpa has one alike but not as new and tricked out as that ! Have an awesome week ! I was hoping to get a snow clearing video up but I only got the battery to start on my tractor this evening and all the snow was frozen solid by then . But on the bright side we are getting another 5 cm's of snow tomorrow so maybe enough to make a video ! Love the video, snowblower and HOODIE . Lol have a good week - Matthew - happy tractoring

Hey Paul. I'm in the Moncton, NB area. I find your videos entertaining which may be a reflection on how bad TV is getting. :) I just thought I would let you know that Sears over here had the M12 X2 batteries on for $14. Check your local store, you never know.

Hi Paul, Just an FYI. I spoke to Honda's tech support regarding the track pins today. The front wheel on the snowblower is called the crawler wheel and that takes sheer pin & cotter pin # 06907-732-000 comes as a kit or set. The back track wheel known as the slick wheel takes sheer pin # 90702-743-000 and cotter pin # 94201-30180. They are both meant to sheer to stop any damage to the unit. So I removed the harden bolt and nut I put on. Keep us updated with your future modifications. Thanks, John

Another great video! I thought you would have turned those light to point out to the front and side. I was looking for a battery operated grease gun earlier this week. Just hard for me to justify $200 but I guess I can't take it with me. LOL! Milwaukee make great tools. Been using their tools for over 40 years. Never been disappointed. Would love to see Kathy set up in making graphic.

Fun Saturday video working on the "Government Jobs." I agree with you on the suitcase for the greasegun. How would you ever keep it clean? Also, whenever I would get a case with a tool it ment I would need double the storage shelf space. One spot to store the tool and another to store the case. I could use that blower in Cincinnati, Ohio today.

great video got to get myself one of those grease guns great job

Paul, could you do a shop tour of all your tools and wonderful equipment

Where did you get the storage tube from ??

Can't wait to see this blower in action!

Do you live on Roaches line? the road to Bay Roberts and Carboneer

Nice video Paul. I like the new lights, They definitely add a lot more light to the back of the machine. Have you guys had any snow up there yet, Like a dusting or something, We had around a half and inch on Thursday night but it was all gone by the time morning rolled around. We still need to get to see Kathy's decal making room and the stuff she uses, It would be a great video.

I subscribed kubota tee

I just realized something lol , your first year not commercially snowclearing is my first year doing commercial snowclearing lol

hi i will like to now where you get the snowblower front housing extension peace from,i can't find it in the us

If Kathy is like most other females she now has a new Milwaukee makeup case!! I like those lights... wouldn't mind an ebay link if you got it handy.. ;-) BTW: any chance I can take Kathy on my next PA trip?? I never seem to find the good stuff. LOL Colin ;-)

Hey Paul That's Awesome video .. I love my 28" HD Snow Blower from Craftsman that bought last year ... Most definitely has been a back savor :)

Paul..so the Honda has a DC generator? Do you know if all snowblowers that have lights have a DC generator? I have an old Crappy Tire blower that I want to replace the 27W light with a 27W LED. But I heard that if it has a AC generator the LED will flicker while running.

Must have won 649

great video , just found your chanel, i'm doing the same with my snowblower and was woundering what i could add next, and i have just found it from you, i have added a meltbuddy from ariens,drift cutters, cab, rotating road flair ontop of cab( from ebay),drink holder,. I'm looking for a horn maybe a bycle horn and radio, anyway keep up the videos and i will look at more of your past vids,. thanks

GREAT VIDEO PAUL

What kind of alarm system did you install and where can I get one?

Awww man the alarm made me crack the fuck up lol...pretty cool upgrades but some had to be time killers. Good vid btw

Good stuff - the only thing you haven't done on your channel that is widely used in Newfoundland is chainsaw repairs or even better yet you must have an electric chainsaw sharpener. Do you sharpen chains as well Paul. I just got a sharpener and tell you what there's not a vid out there that shows the way you would do it- hint hint. LOL take care .

Where can I get one of those nice drift breakers that you have installed? See pics online but can't seem to find one anywhere. Also that waterproof tube. Can anyone help??

What size water proof tube did you purchase ?

were did u get those lights?

Paul do you have the part number to the Auger housing extender???? Great job on your blower so well done....Alarm is awesome and lights.

You Sure Do Nice Work Paul . I Like Your Videos And Shop

Love the machine and mods. Do the modifications void the warranty?

I totally "get" the mod factor. Guilty myself of doing such things. I live on the side of a mountain in the Sierras, so I get a bit of snow but not enough to need a Blow Snower. Having never owned, needed or operated one, why does one need so much lighting behind the machine? So you can see what color boots you're wearing?

What kind of camera are you using. Awesome videos!!

Hi Paul! Thank you for looking into the part number for me. I have ordered the heavy duty commercial skid shoe plates for the side and back of the HS724TC. A question for you. With regards to the Honda manual it states to use 5w30 oil for the blowers. Because of the cold weather that we get here no different then where you are. Would you see any pros or cons with changing the weight of the oil to 0w20? Reason for asking is because of the viscosity of the oil on cold start ups? My garage is not heated. I am thinking running synthetic would be better, plus the tolerances in the motor shouldn't be effected? I always want to run good quality oil in my machines, but am worried that if I change the oil after the break in period it might effect the blower and any future engine issues. I would very much like your opinion. Hope your having a good day!

het Paul! Nice mods on the snowblower! I have the Honda hss 970 2014 and i have orderd a 36w led lamp to mount on my snowblower. What kind of metall pipe did you use to make the led light come a Little bit higher? Did you do it yourself or what?

Hey Paul, does Kathy have her own little business doing custom decals and the like?

Hi Paul really enjoy you video that y i Subscribed i have a Honda 6 hp 21"Commercial type i like to know how to install a light on it specially how to do the wiring .... thank you Paul

Yes you can buy m18 grease gun , i have one !

Hey Paul. I was just wondering how you attached the waterproof tube for your tools and shear pins to the blower?

Hey Paul I would love to purchase a set of those decals for the track sprockets.. They would good on my 15 Honda hs928..

Hey Paul i would love to get an alarm for my machine . can you direct me on where to purchase one ?

That canister where can it be bought?

cool

Hi, I love the modifications, Thanks for sharing. Question: I noticed when you zoomed in on the sprockets the pins you had holding the sprockets in place were the same for both the front and back held in place by a cotter pin. My unit has the same set up for the 2 rear, but a harden nut and bolt for the 2 front sprockets. I bought the unit used so I'm not sure which is correct. The Honda part # for the cotter pin set up ( Your Set Up) is #90702-743-000. Is this what I should be using for all 4 sprockets? Thanks, John

Hi guys, Could you tell me what the description (search string) was on ebay listing for the blowsnower lights? Thanks in advance!

Hi Paul, Have you ever tried to wash your tractor like this (first few sec. of the movie): kzfaq.info/get/bejne/n7lklpZ8ubi0e5c.html :)