Honda ST1100A - Reinstalling the clutch

Honda ST1100A - Reinstalling the clutch - Part 10

Рет қаралды 8,141

5 жыл бұрын

Honda ST1100A - Reinstalling the clutch - Part 10
I have the new clutch ready, so time to take apart the old one, clean.replace and reassemble, plates were pre-soaked but forgot to mention in the video
Help me grow and continue to spread the good word by becoming a Patron of The Amateur Bike Builder
Click to join the team.
/ theamateurbikebuilder
Alternatively If you just want to say thanks for this video alone,
you can drop a dollar in our "Tip Cup' by using Paypal to hindicobra1969@gmail.com
The money will go to make more videos
If you havent already,please remember to Subscribe - / hindicobra
Follow me on Facebook :-
Hindicobra-669625496577879/
Check me out on Twitter :-
/ hindicobra
Find me on Reddit :
www.reddit.com/user/TheBikeBuilder

Пікірлер: 30

@berferd2 4 жыл бұрын

I have not done the clutch on my ST1100A, but on other bikes I've stacked the plates on the inner clutch basket rather than trying to fit the inner clutch basket into the stack as you did. Doing it that way is a bit easier.

@TheAmateurBikeBuilder 4 жыл бұрын

Thanks Berferd2, appreciate your comment, was my first time on doing an ST1100 clutch, so bit of an experience, it was a bit of trial an error, but worked ok

@colinsharp1314 5 жыл бұрын

Great job Keith your getting there mate thanks for all your hard work makes great watching

@TheAmateurBikeBuilder 5 жыл бұрын

Thanks Colin, glad you are enjoying the video's , appreciate your support

@locustbay7594 5 жыл бұрын

Good job mate. Very informative and entertaining

@TheAmateurBikeBuilder 5 жыл бұрын

Cheers Gary, i try and do the best i can, i do miss somethings or forget stuff, all part of learning

@michaelwallace981 Жыл бұрын

Hello I have a bike just like yours & I will give it to you 4 a engine 4 my Honda Odyssey FL 250 I want a CR500R to stroke engine 4 my Odyssey I have the paper work for the bike it just needs the seal u just put in yours runs grate

@TheAmateurBikeBuilder Жыл бұрын

Hello, Thanks for the comment, i do not have a CR500 engine and i have 5 bikes at the moment and no room for another one, but appreciate the offer, hope you find what you are looking for

@Fake-moon-landing. Жыл бұрын

How did you align the 4 pegs on the oil pump, if you can remember 3years ago lol.

@TheAmateurBikeBuilder Жыл бұрын

i cant remember as it was a while ago, i think it is in the manual, or if you are on facebook there are several owners club pages and there members are very helpful, i have used them often

@johnnieschoelzer8771 4 жыл бұрын

Nice video, thanks. what is the torque needed for the centernut for the basket, and for the 5 bolts holding the clutchplates?? Do you need to remove the chain behind the basket, to remove the innerclutch cover ?? I have a broken M6 x 80 mm. bolt that needs to come out, since the clutch is leaking.

@TheAmateurBikeBuilder 4 жыл бұрын

Thanks Johnnie, appreciate your comment, the torque setting for the centernut is 110NM , there isn't a torque setting in the Haynes manual for the 5 bolts, i didnt remove the chain , so cannot help you on that

@northerner1374 5 жыл бұрын

Does Honda suggest the gasket going on dry Kieth? I’d be worried it would leak without a small amount of rtv. What are your thoughts?

@TheAmateurBikeBuilder 5 жыл бұрын

Thanks Northerner, i used gasket sealant as well, just a light smearing to give a good bond, i wouldn't just use a dry gasket in that situation where fluids are involved

@1973mayo28 4 жыл бұрын

Hola!! Saludos afectuosos, gracias por sus videos!! Son muy informativos, le comento hace un mes compré este modelo es 1994, y estoy fascinado con ella, sus videos me han servido bastante, una pregunta, yo estoy en Tijuana creé usted que pueda pedir refacciones donde usted las pide? De momento necesito el amortiguador trasero, de antemano mil gracias saludos y buenas rodadas,,

@TheAmateurBikeBuilder 4 жыл бұрын

Hola Oscar, estoy feliz de que los videos sean útiles, lo siento, mi español no es bueno, obtengo mis partes de Wemoto.com, aquí hay un enlace al sitio web www.wemoto.com/search?q=st1100 Haga clic en su bicicleta / modelo y le mostrará todas las partes que tienen

@1973mayo28 4 жыл бұрын

@@TheAmateurBikeBuilder excelente!! Muchas gracias me ayudó bastante,saludos.

@banditnev 5 жыл бұрын

I noticed that you didn't soak the clutch plates in oil unless you did that off camera or maybe that bike is different.

@TheAmateurBikeBuilder 5 жыл бұрын

Thanks Banditnev, well spotted, i did them off camera but silly me forgot to mention it, i did change the description to include this point

@cyberfxeducational165 3 жыл бұрын

Hi. I have been following your videos on KZfaq and thanks for the time you spend. It helps a lot. I know it is an old video but lately, I was changing the clutch disks on my Honda ST1100 and after all done my clutch lever was really hard like a brake lever. I bleed the clutch but it didn't help. Looks like the lifter plate can't move. as far I understand the lifter will pull the pressure plate decoupling the disks(please correct me if I am wrong) but it seems like the whole thing is already pulled. I was thinking maybe the screws holding the lifter don't have to be screwed to the end so the springs can have room to move. Any idea that can cause this issue? Thanks again for your videos. Marcio

@TheAmateurBikeBuilder 3 жыл бұрын

Thanks, glad they help, it was the first time working on an St11 so big learning curve, it was a while ago. but make sure the 2 triangle arrows line up as that will cause issues and the lever will be solid. see video at 6.11 and also that the locater dowel and the basket(see 7.49) line up, esle the basket will sit forward causing problems

@wheeliebow 5 жыл бұрын

Did you pre-soak the clutch plates before assembly or is it not necessary on the ST1100 ?

@TheAmateurBikeBuilder 5 жыл бұрын

Thanks Wheeliebow, yes, i pre-soaked the plates for probably an hour or so, but forgot to mention it on the video

@wheeliebow 5 жыл бұрын

The Amateur Bike Builder that’s a relief ! Enjoying the videos by the way, keep em coming and thank you.

@TheAmateurBikeBuilder 5 жыл бұрын

@@wheeliebow Thanks, glad you are enjoying them

@calvinfogue6747 3 жыл бұрын

I like it but you r skipping some parts which it ain't good for new owners like me.

@TheAmateurBikeBuilder 3 жыл бұрын

Thanks Calvin,appreciate and understand your comment, that was my first time working on an ST1100 clutch, so all new to me to, it is difficult to get everything in without making go on for ages, but still get important info included, so apologies, i do try to cover as much as i can, but i must say always use the manual, also some of the ST1100 forums are great, i use them a lot

@RoadcraftNottingham 4 жыл бұрын

Hey buddy, is there any particular reason for you removing the main basket? I've only ever done that when actually replacing it. I understand you forgot to mention soaking the plates first too... Bugger. Lol. Thanks for the upload. Russ

@TheAmateurBikeBuilder 4 жыл бұрын

Thanks Russ, this bike is an unknown entity to me, the previous owner didn't look after it, so its a case of no stone unturned so to say, so going through it as much as i can,yes forgot to mention the soaking the plates, i did put it in the description but not many read that,

@RoadcraftNottingham 4 жыл бұрын

@@TheAmateurBikeBuilder... Me included lol and I hate it when people don't read mine but I do say "read description first" on some titles. ☺