Honda VFR 800F 14- - full equipment. RAPID BIKE EVO module, RAPID BIKE QS, SHAD, HONDA BAR RISERS, SCOTTS STEERING STABILIZER, HONDA SIDE PANNIERS, SCPROJECT SLIPON, R&G
Пікірлер: 35
@TheThorpester3 жыл бұрын
Lovely mate. I just bought a 2016 in Red. Ordered the SC-Project and can't wait!
@ka.c30313 жыл бұрын
SC will do job!
@hafeexius4 жыл бұрын
Beautiful!
@S1kTh663 жыл бұрын
This would be the perfect bike if it was 20kgs lighter and didn't have VTEC.
@amardeeptaggar21152 жыл бұрын
I have this bike and can’t agree more
@roniyerushalmi27652 жыл бұрын
Isn’t the vtec what makes this bike special?
@giannifant11332 жыл бұрын
Infatti,il peso e' l' UNICO vero difetto di questo progetto.....
@nickranieri30964 жыл бұрын
Your setup looks great. Been looking for a top case to provide a backrest for passenger...it seems from the video that the case is mounted back quite far from the seat. Do you know or think that with a backrest installed it would provide proper support for a passenger? Also what's the part number for the mounting plate?
@ka.c30314 жыл бұрын
I`m solo rider so I`ve never tried if it would provide proper support for a passenger. Shad has proper backrest just look for backrest SH45 in google. And as for second question shad`s mounting plate I had with bracket. It`s full kit.
@Mario-do7bf3 жыл бұрын
Is this exhaust compatible with the factory panniers? I’m concerned about the heat on the right one
@petrl72862 жыл бұрын
Nice bike! Whitout DBkiller?
@ka.c30312 жыл бұрын
Yes mate!
@bucsanders78615 жыл бұрын
What is that phone mount on the left handle bar? Also, did you use the OEM rear carrier and some special plate mount for the Top case?
@ka.c30315 жыл бұрын
Hi, it is RAM-B-273U and I use Shad system with bracket and plate
@kooljack72474 жыл бұрын
Hi, what type of crash pad installed on your fvr, on mine, I don't have a hole to install it, and what type. Drive safe
@ka.c30314 жыл бұрын
Hi this is R&G crashpads. I've installed them by drilling holes in fairings by myself.
@oniona.4 жыл бұрын
Witam, na co zwrocic uwagę przy kupnie tego moto?
@ka.c30314 жыл бұрын
Witam, Pisz na FB.
@Desertduleler_884 жыл бұрын
Is the centre stand an option? I've seen many without it...
@ka.c30314 жыл бұрын
In deluxe version its standard.
@adriandavid9704 жыл бұрын
Hi there! I would like to ask you a few things, as I am also looking to a VFR800 from 2014 on. At the moment I have a 2005 model, so the side cases don't match to the newer model. How much do they cost? As I understand from your other comments, they are original Honda cases. Does Givi also make cases for 2014- model? Or Shad? Hop eI hear from you...Thanks in advance, Adrian
@ka.c30314 жыл бұрын
My local dealer offer me brand new OEM side cases for 400euros. So I think its quit cheap. If you are looking for non brand: GIVI or Shad you have to install first on bike additional mounting brackets. Givi makes PLX ora PLXR (removable version). Shad has 3P (3 point mounting case bracket) and looks more clear on bike then GiVi. But for me the nice looking are OEM
@adriandavid9704 жыл бұрын
@@ka.c3031 Wow, for 400 euros I would buy them today! I will have to look into it! Thank you very much for your reply!
@bucsanders78615 жыл бұрын
I have a new 2015, I'm really liking the SC project exhaust, but the angle looks to be a bit odd? It looks like it is mounted so that it is more pointing at an angle as opposed to a more level look? I've seen a few installed looking like this. Is there only one way to install the SC Project? Are there different brackets that make the pipe look more level? Thanks!
@ka.c30315 жыл бұрын
No, it`s looks to be compromised betwen touring and sport style. It`s a matter of taste :) But before I bought it, I saw a few mufflers. Did you see triumph sprint 1050 GT? There is leveled slip on. Even if You change it for shorter, aftermarket one, due to position on bike, for me it would look bad. To SC, there is only this way to mount on bike. Just imagine how shorter one will look kzfaq.info/get/bejne/Z7mahZpyna62iYk.html
@mario4YT5 жыл бұрын
Hi Could you tell me what kind of attack for mobile or navigator you have installed on the left handlebar of the bike? Thanks Mario
@ka.c30315 жыл бұрын
This is the bracket that was in the box with the garmin zumo. It is mounted on two screws from the clutch master reservoir brecket. www.google.com/search?q=clutch+master+reservoir+garmin+zumo&tbm=isch&tbo=u&source=univ&sa=X&ved=2ahUKEwjl4qTku87fAhXB66QKHVRoCcAQsAR6BAgEEAE&biw=1366&bih=626#imgrc=7dzj7lyr0E-D1M:
@fensn61726 жыл бұрын
Hi, is it difficult to install a steering damper, and if there is any link for it? thanks
@ka.c30316 жыл бұрын
Hi, scotts do not have mounting kit for our bikes. This one it`s home made. I asked my friend to made it for me. We based on pictures from Chinese one which are avalible on ebay.
@seanprice26724 жыл бұрын
What mount did you use for the rear luggage?
@ka.c30314 жыл бұрын
Hi, for center case I used Shad KSHH0VF84ST bracket
@JBDacasinJr6 жыл бұрын
How is your right bag holding up. Is it melting from the exhaust heat? I have a dell evil shorty. I am worried, if anything. I can switch back to stock no problem.
@ka.c30316 жыл бұрын
This side case is from VFR1200F. They have same mounting points and there is no problem with slipon. There is a lot of space so exhaust gases don`t couse any problems. Under case there is metal panel against overheating too. It`s work P&P. I made a lot off KM in this setup with no problems with stuff inside case.
@JBDacasinJr6 жыл бұрын
Awesome thats good to know. I have the shorty delkevic and should be getting my oem bags soon. I went for the Givi on the top case. So excited. Your bike set up is nice. Did you do the free mods flapper, snorkel and pair?
@ka.c30316 жыл бұрын
I chose shad becouse mounting kit lookes for me nicer then givi but in opossite to top case givi which is nicer shad`s top case is ugly. If I chose givi I`ll buy V47. Both trunks has almost same size as OEM one. Something which is important for me too is that in my setup I use oem hand arms. I made all free modes becouse I installed rapid bike module.