Indeed, thanks for the comment

Some are comming from the factory oiled up already, like this one

Really?

They've done that

@@IdealBike In the video they appear to go straight from unwrapping it to installing it.

@@CaptHollister mine came with lube underneath the plastic protector

Thanks for sharing

No way you did that many

@Erik-sq8nz yes I did bk and forward 140 mile one way for 2 weeks soon mounts up but hey how you know better not!!!!! You sound like a foreigner lmao

@@gavinlawrie3549 i’m in canada and we have huge endless roads that are very easy to add up miles. And thats very impressive you got to ride that much. I know if i got the transalp when it comes here next year that i’d do the sMe

@Erik-sq8nz oh that will explain it, yes we have loads of off terrain roads too but I don't take my transalp off road it's too new for that and I don't want to get it scratched lol all the best eriik

Hello thanks for the comment, do far very happy, I'll share all my feedback throughout the channel

It's in the front side of the petrol tank, you can change it but you'll need to take out the petrol tank

Yes you can do it for yourself anytime, I have a dashboard tutorial for the Transalp 750 on the channel

They used some brakes spray, I use something that protect the o-rings from some local bricolaj store.

As incredible as it may seem, no slippery at all

After that they used a spray to clean the rear tyre, sorry for not mentioned that before

At 03:40 you will see...30 nM both

@@IdealBike It's wrong, the oil filter tightens to 26nm and not 30nm, the engine oil drain bolt tightens to 30nm. Just to be precise. Greetings.

@gianfrancomarraffa5765 The torque numbers were from the Honda OEM service manual, perhaps you have a different one 😁

@@IdealBike From the original Honda XL 750 Transalp service manual: MAINTENANCE ENGINE OIL CHANGE Warm up the engine. Stop the engine and remove the oil filler cap/dipstick. Place an oil pan under the engine to catch the engine oil, then remove the engine oil drain bolt [1] and sealing washer [2]. Drain the engine oil completely. Clean the drain bolt and install new sealing washer onto the drain bolt. Install and tighten the drain bolt to the specified torque. TORQUE: 30 Nm (3.1 kgf-m, 22 Ibfft) Fill the engine with the recommended engine oil (page 3-11). ENGINE OIL CAPACITY: 3.4 liters (3.6 US qt, 3.0 Imp qt) after draining 3.6 liters (3.8 US qt, 3.2 Imp qt) after oil filter change 3.9 liters (4.1 US qt, 3.4 Imp qt) after disassembly Make sure that there are no oil leaks. ENGINE OIL FILTER Drain the engine oil (page 3-12). Remove and discard the oil filter cartridge [1] using the special tool. TOOL: Oil Filter Wrench [2] 07HAA-PJ70101 Check the oil filter boss [1] protrusion from the crankcase is within the specified length as shown. SPECIFIED LENGTH [2]: 16 + 0.5 mm (0.5 ± 0.02 in) NOTE: • If the oil filter boss is removed, apply locking agent to the oil filter boss threads as shown and install it.MAINTENANCE Clean the oil filter attaching surface of the crankcase. Apply engine oil to new oil filter cartridge threads and O-ring [1], Install and tighten the oil filter cartridge [2] to the specified torque using the special tool. TOOL: Oil Filter Wrench [3] 07HAA-PJ70101 TORQUE: 26 Nm (2.7 kgf m, 19 Ibf-ft) Fill the engine with the recommended engine oil (page 3-11). Make sure that there are no oil leaks.

They came already oiled

in Ukraine 100$ for all

The price was for the following : oil change, radiator guard mount (2 bolts), filter change, chain clean, bike clean, radiator clean, 12V socket installation all for the total price of 140 EUR.

​@@IdealBikeit's with the cost of raditor guard and 12v socket, or only work with oil and filter?

Only work plus oil filter price plus oil price plus chain spray... 😉

about central stant. today i 've installed it , there is no backlash or side movement at all, even during installation it was holding itself

I just said in the video. Because if you remove first the filter all the accumulated dirt will first go out its better drained. Also you can easily clean the pipes with spray afterwards

The logic behind removing the oil filter first is flawed. Regardless of the order. The containments will stay in the filter.

30 Nm

thank you sir!@@IdealBike

@wesker6575 You are welcome 🙏

this is first service during warranty . service center will put only genuine honda parts and oil

I prefer to make it here, I can film for you everything.

​@@13KaTaFaLK13 I use OEM genuine parts until the warranty period is over, which is 2 years here for Honda motorcycles. I don't want Honda to deny warranty claim. After the warranty period, I may start using aftermarket parts if it's much cheaper or seems like better quality.

I have extended warranty 4 years

@@sonics747, Warranty in Luxembourg / Belgium is 5 years. ;-)

Va trebui să întrebați la reprezentantă el diferă.

@@IdealBike intrebam de un cost estimativ, pentru Transalp..

@bogdangheorghe5427 Undeva la 700 lei

@@IdealBike multumiri! Asfalt uscat! Numai bine!

It came oiled

Not mentioning on the tire. Skidding is the name of the game.

The bike it's quite powerful for a new rider, however you can choose the lower power setting and until 5000 rpm the bike it's quite nimble and easy to handle.

Mulțumesc, mă bucur 👍

Air filter it's under the petrol tank, I will consider to put a K&N filter after the first replacement. The oil it's 10W30 Honda OEM Oil

I believe the engine was still quite warm as the oil was drained. Warmer oil flows faster out of the drain and filter.

The oil was hot and in perfect condition.

Great ! I have recieved also the Central Stand but haven't mount it yet, please leave a short feedback. greetings!

A decent torque wrench it's 25 eur and skidplate remove takes 10 seconds has 6 bolts