Yes totally agree, had Nox over 2 half years now , there's nothing to dislike with the nox I not had any problems with it what so ever. I added a carbon stem with locking camlocks CMD carbon stems really work well. The only down side , I found it dosent like fresh deep ploughed, the more compacted it is the better problem solved. All coils work great the 6 " is li'e a Pinnion
@archie5594 Жыл бұрын
got any advice to help this freshly ploughed situation? I've found that it gets no depth on the fresh ploughed like you have.
@diggersouth7 ай бұрын
I just bought the 800. My white's teasurepro like the opposite and will go deep is looser dirt but doesn't like the compacted as much. But then again depending on the soil.
@irokradio3 жыл бұрын
I have a CTX 3030, had it for 10 years and just broke the coil 'ears' There is a 'ear' fix if broken. The issue is when you tighten the nuts it pushes the 'ears' inward and puts pressure on them. Woukd be the same on the Nox. Just cut 2 'washers' from say a plastic milk container and place one either side. Then when you tighten the nuts the 'ears' don't bend inward. Thanks for the review. I may get one to add to the arsenal. Still live my 3030, technology that is still hard to beat 10 years on. Aussie Okie (Paul).
@wbauerle3 жыл бұрын
Thank you for the video, I am considering a Nox 800. I've owned and used many others and my last one was a E-Trac. Since you invited criticism I do have to say that a bit more detail would be great and less vague generalizations. I did glean some info that was helpful but was hoping for more :)
@ut000bs3 жыл бұрын
Great video, Grim. I just bought one this morning. I was hard pressed to decide between the Garrett AT Max and the Equi 800. I've used both the AT Pro and AT Gold before and they're certainly good machines but talking to people and some videos here on YT gave me enough info to decide on Minelab. I've not done a lot of detecting outside of some in my work (mining geologist) and I've never had one of my own. I did find a 1955 silver dime messing around a sidewalk with a Gold Monster once so I'm on the board for silver already. 😉🤭 Can't wait to haul that thing to the beach and a few other places all in walking distance of my place. I'm off on a new hobby and adventure.
@kevp30113 жыл бұрын
The arm cup wobble is due to the bolt being slightly to long and bottoms out and doesn't tighten properly, I added two thin washers over the bolt to fix the issue without over tightening .
@ukspankedyank3 жыл бұрын
You could mention there are some good aftermarket items that solve some of the bad points. There's this thing you can attach to the coil that strengthens it and There's this carbon fiber staff you can get that has those flip locks on it.
@wolfsden38123 жыл бұрын
Tim where do you get the clip to re enforce the coil ? Thanks
@chrismontague55993 жыл бұрын
I totally agree i also upgraded with the carbon shaft CMD offers. And yes the only time , its not as good, is on light airy freshly ploghed soil, needs to be firm and Compacted to work at its best. But there's not many detectors out there, that are the same in that respect.
@stevejuncar15273 жыл бұрын
Never had a problem with the coil and i use mine like a whacking stick to clear stubble and other stuff
@CrucesNomad12 жыл бұрын
Headphones a must, wish they were waterproof but would be heavier. Arm Cuff needs to be reworked to be sturdy, with being light as its key function. Hand Grip, you can hold it all day and Im a old man. Control Box, lot of power and options packed in there. Shaft, scratched easily but sturdy. Coils(s), all seem to do same depth but have slight differences when using them. Not convinced it is deeper or more sensitive than my F75. Also miss the two screen method I have on my etrac. As for setting up and running but find a program that works for you and stick with it. I find rings and has proven it can find rings. I also found a silver dollar and the numbers were dead on. Number ID tend to be within 3 digits so you have a good idea of what your digging. The sound feature is your best friend. You seem fixated on the coil lugs, if your swinging for over the fence you will be fine.
@Crashoutwopper Жыл бұрын
What’s a good over all beginning detector for someone who really wants to get into the hobbie
@kevintaylor40643 жыл бұрын
Grim, interesting thoughts, you having used the Nox for a few weeks. While I agree with you on the make up of the shaft & its inability to compact down for transporting in the boot of a small car, there are now collapsable carbon shafts that provide a solution to these 2 issues you stated. I have owned the Nox 800 for 2.5 years, having bought it a few months after launch. Mine is still in the standard form, I have bought the 6" & 15" coils as well. I don't go on the beach, not my thing but live in the fens spending most of my time on arable land, stubble & some pasture. I carry a coil lug repair kit with me in case but never use the coil for pushing soil out the way or leaning on it. Lots of my mates use a Nox, a few had coil lug issues but most admitted to coil abuse. As for your finding the Nox questionable on deep ploughed land, the first coin I found on the 15" coil was a cut quarter hammie 12" down & i have since found many deep targets. The Nox is a deep searching machine, so your comment on this aspect of use was surprising, as the machines I have seen you use before on your videos, are inferior in my opinion. But we are all different. I hope you stick with the Nox, many of the detectorists I dig with have had a Simplex or Nokta machine but after a few months up against the Nox upgraded & noticed the difference. CTX3030 owners have even sold their heavyweight machines for the lighter Nox & not experienced deep plough issues or a reduction in finds. Stick with the quality Minelab Equinox 800, after 2 years I'm really in tune with my Nox & have no plans to change, as its still the best machine on the market. Kev in South Lincs.
@stuartbibby44153 жыл бұрын
Great reply, grim is very new to the nox, two days ago whent on a completely dead feild its been hammered to death, two of us using the equinox 800 i got three hammered freind got one, believe me this feild was the pits, as been for ever, for fun we go on the worst feilds ever just to see what is really there time after time, it produces the goods as i said in previous comment, it goes deep on any soil not only that it goes deep on very small hammereds, and also loves gold,
@simonrocco3 жыл бұрын
Good vid grim, Iv had my equinox since they first came out and never had any problems with the coil lugs snapping and I am pretty rough with it but I do keep it pretty loose so the coil can move easily though. I do agree with you that the stem could have done with an update maybe that's something minelab will change in the future
@nippyzippy13 жыл бұрын
Gaps in plough and rocks....get a wee small coil for it.. works brill.. You can get a plastic protector for the coil bolt slot.. Think you can get telescopic shafts for it🤔 Other great aspects.. incredible audio of the signals and no digging of hotrocks.
@andyrowley80773 жыл бұрын
Hi mate I swapped my at pro for the nox800 after my accident I love it are u going to keep it as your main detector still? You will be glad to here I no longer need my wheelchair at all now it's took 9 years to get rid off it and can walk abit more so can detect a but more your videod as always keep me going on the bad days when I struggle your videos really have bin apart of my therapy thanks for that I really do mean it keep in coming oh I did find my first bit of gold bronze age it's part of a bigger thing it's in London now thanks again mate
@BruceGordon9252 жыл бұрын
Best watch all the videos, Good and Bad, Know what you are getting into before you buy. Find out what upgrades will be necessary. Know the weak and the strong of the ML machines.
@jayman69055 ай бұрын
Nice video, I'm tempted to upgrade from my 540, there's a 600 on offer at £459 moment is it worth upgrading to that or wait for a deal on on a 800
@diggersouth7 ай бұрын
Can you tell how it reacts to soil with a lot of clay? Just bought the 800.
@vincephipps12 жыл бұрын
I think most coil tabs break when people use them for a crutch to get up after digging there target I've never had a problem with that but I have worn out a few lower shafts but they just traded me for a new ones at no cost I have since gone to the Detect Ed shafts and haven't had anymore problems
@AshUnearthed3 жыл бұрын
Think I might get a nox now
@patrashdigger3 жыл бұрын
Slow the recovery down on plowed fields
@chrismontague55993 жыл бұрын
The 6 " is like a pinpointer on steroids deep and sensertive great on stubble And 15" is deep sensitive great on small hammerds works great on ploughed and pasture, and greater ground coverage
@LeeRalph1003 жыл бұрын
I want to know how many others cracked a smile when you said "Shrubberies" :LOL Sorry I am a big Monty Python fan, but good review, I am looking at getting one, I am still not sold on it yet. I now use a Minelab Xterra 705 and a Whites MXT 300. The one complaint I have with thew Xterra is the compressed VDI scale as compared to the Whites. I hear the 800 is even more compressed. I wonder if I will like that, what are your thoughts on the compressed scale? Thanks for the review
@JR-sg9xk8 ай бұрын
Will it do well in a rocky terrain?
@treasurehuntingscotlandmud9340 Жыл бұрын
Very informative video
@NorfolkButtonBoyMetalDetecting3 жыл бұрын
Beast of a machine never let me down #Norfolkbuttonboy
@egg536411 ай бұрын
Hey mate from Australia. Great video, thank you! Quick question: When you say “it doesn’t like anything with gaps (ploughed fields etc), can you define “doesn’t like”? Please excuse the lame question, I’m very new to the game. Thank you
@chrismontague55993 жыл бұрын
Excellent honest reviews
@jonhardiment3 жыл бұрын
Thank you Grimothy for this review. I'm 90% certain I'll by buying one very soon, but defo keeping the bullet proof Simplx+!!!!!
@chewcharlie323 жыл бұрын
Fantastic review Lukus ! 🙌🙌🙌 very informative and super examples of how it works .... think I need one of these .... light weight ✅long battery life ✅and headphones too ✅.... best beach machine ....✅ Fully waterproof ✅and easy to use .... ✅ well the positives weigh out the negatives to me x 👌☺️ Sounds a brilliant machine . My Garrett 250 like my crutch ... whistles in the wind! Haha 😆 need start saving up ! Is it true the army use mine lab ??
@kenthomson95622 жыл бұрын
Your fear for the lugs is not a fault of the machine.
@MarkALong643 жыл бұрын
For background, I started with Laser and Tesoro machines, moved to White's DFX then a Makro Racer 2, a Nokta Invennio and now an XP ORX. I have borrowed an Minelab 800 from a friend. My impressions were that it offered good stability and very good depth in ideal conditions. It was a very polite machine. It doesn't seem to chat much and I missed the constant feedback about what was under the coil. I didn't feel very connected to the target and it was not the machine for me.
@oldplucker13 жыл бұрын
I think most detectors are good on ploughed fields because the digging has been done by the plough. I have a Garrett 400i too. I found as much if not more than other machines but I use Beach mode on the ploughed stuff and Park 1 on the dry beach and Pasture. I detect in north essex and good luck digging a 12” hole you would need a pneumatic drill. The tones on the NOX are very pleasant and I have just bought a telescopic shaft. The only true way to compare detectors is to alternate between two detectors every 10 minutes and compare finds at the end of several digs. So there may be better machines for ploughed fields but without comparing as above we will never know. 👍
@davidedgar67602 жыл бұрын
get a coil lug protector and you will never break a lug
@citic1013 жыл бұрын
I AM new "what cheaper machines would you reccommmend ? thanks
@THEGRIMBLEEPER3 жыл бұрын
NOKTA Makro simplex is a good starting machine buddy:)
@citic1012 жыл бұрын
@@THEGRIMBLEEPER THX
@kevinwhat49182 жыл бұрын
I have 2 detectors a Whites XLT and a Laser Hawkeye. I love my Laser but it's starting to play up. This though good is too rich for me to buy. I would like something similar to my Hawkeye but more modern. What would you recommend? I've been looking at Quest X10 and 30 also Vanquish 440 & 540. I prefer woodland and parks, occasionally beach. I been detecting since late mid 70's. Sorry for long question. Thanks 😊
@THEGRIMBLEEPER2 жыл бұрын
Multi frequency if you hit the beach buddy I would say go with vanquish but I haven’t used one for very long but seems good bits of kit :)
@1442GlennLane2 жыл бұрын
In it's day the Minelab Etrac was the best on the market, yet ground conditions haven't changed. A comparison would be interesting. I had an etrac with standard 11", and it was better than the sef coils everyone said were better. I never believe the hype about machines, as you need to test yourself to be 100% imho.
@neilgutteridge64052 жыл бұрын
Very sensible reply and one i agree with totally.A new "best ever" machine comes out quite regularly and they have been for ages but they always end up on ebay when the next greatest one comes along.Take the etrac or even old explorer out to a field eith the nox andvi get they will all pick up the same targets.
@AdventuresWithButtons3 жыл бұрын
Great review of the nox 800 dude I just unboxed my new detector today well jealous how much you’ve been out 😩😂
@davidconnell66483 жыл бұрын
Hello Grim a good honest review from an experienced detectorist can't ask for anything else than that 👍👊🎧👊
@richardnewcombe94493 жыл бұрын
Good honest review. I mostly do the beaches but firstly i find as you do the build quality is a bit poor . Its very similar to the X.Terra in stem build and the cam locks after some serious use can break and just click round and not tighten. I dont care much about it not breaking down smaller , i put the machine in the front passenger seat or back seats and it fits my Fiesta. But the stem is poor quality . I think Minelab did that on purpose to keep the price down. Watch out for the next machine which is likely to be out in 2 years which i have been told might be based on the Nox but with far better target info , and stem ? The coils = The main and almost the only reason people have lugs breaking is they lean on the machine as they dig holes but they are a bit poor. The 15 inch coil is amazing , deep and brilliant coverage. Probably better for the machine than the 11 inch and i love 11 inch coils. The arm cup = Not an issue with the design other than the bolt , when leaving it together for a long time the plastic bit on the end can fall off (X.Terra) and that is a pain though all you need is a Phillips screwdriver . And glue to put the plastic end back on. Battery = i think its too short on endurance. Something along the lines of 25 hours charge with a 2 hour charge time would be good. The hand grip is not a bother . But i bet it will wear down after years of use. That will be a problem. Target info = Not a patch on many others . I prefer the E.Trac for target info which for me is still the best machine by far for dry beach or up to 2 feet in water . There are too few numbers on the Nox and most of the low tone targets are all in a small area on the screen. Headphones = Good , they suit the machine but are a copy of a Chinese type and they are to damned expensive because of the Minelab logo on them . Try AUGUST EP650B (not BC) , a cheap type that i use. Charging method = Fine. BUT = The biggest bug bear i have with this machine is that after the warranty runs out if it goes wrong there is no repair. But i have been told that there is a solution . Might be that you send back and they exchange for a lower price the box ?? Not sure of that one. You say that it is poor in airy soil . All Multi Frequency machines are a bit awkward in airy ground. I found the single freq the X.Terra running on 7.5khts was great in airy beaches but the Nox isn't as good in Multi . The Nox does have single freq options . Use 10 or 15 khts for airy soil. I found in Multi that it messed with Pylons too but in single it was fine. I search many stony beaches and haven't noticed any serious issues with depth . But maybe my settings are the reason for that ? I set mine up to as close to my E.Trac as i can get it. There are people that use one of the beach programs on land for certain places but i dont do much land at the moment . Even if i did i think i would go back to my E.Trac or the Deus . I dont know anything about Nokta's , have heard about the new Multi freq but i dont know if i would buy it .
@Poochpurtill3 жыл бұрын
In the review you said it’s a good pasture detector but not the best?? What in your experience is the best Pasture detector ?? I have a deus but struggle on Pasture and looking to buy a decent pasture machine, was it one of your Nokta’s ?
@stuartbibby44153 жыл бұрын
Thats his review as a very new user, drop the recovery speed put it in feild 2, i have owned the etrac that was a very deep grass machine but the old fbs you find yourself digging alot of large items at depth, the beauty of the multiique, it can get a cut half at depth, but also your large artifacts
@diggingwithdale47343 жыл бұрын
Buddy just got a 600 I decided to try the natko impact
@TravelingThrifter3 жыл бұрын
That's a honest review, I agree with everything but I have not tested in any plowed fields so dont know about the gap problem.
@DeusDigger3 жыл бұрын
Thanks for the honest review grim. I'll be sticking with my mmk for the time being. Let's see what nokta makro bring out in the near future
@bendannett3 жыл бұрын
Thanks for the honest review Grim! You're right about cheap machines, some are actually very good. Managed to find a gold quarter stater last year with a TX-850 (Teknetics G2 clone) Never thought it could be done...not that I condone cloned machines of course, but it's interesting to compare to top end machines.
@epicpandarob32336 ай бұрын
@bendannett, are you claiming this is a Cheap machine? I'd say its mid-range? But good enough for a beginner right?
@codyminecrack2482 жыл бұрын
Meld metal reinforcements to the exterior of the machine. Time well spent to upgrade equipment. :)
@josslucas15453 жыл бұрын
Good honest review, I agree with everything except that I found the headphones awful. The wind noise that comes through them particularly on the beach almost drowns out the tones, and after using some better headphones and the WM08 module, i'd never go back. In fact i sold them. My favourite thing about it is that I no longer dig big old lumps of coal like I used to with my Makro.
@andrearojas93203 жыл бұрын
How depth can I search ?
@TreasureEdd3 жыл бұрын
Good review Lukus, How would you compare it performance wise to the Anifibio please? Shame its not built very good for a top end machine !! many thanks Dave
@ImranKhan-bc9cr Жыл бұрын
Hi
@raysloan59252 жыл бұрын
Like the good points and bad
@JayJay-fy1bg3 жыл бұрын
Thanks Grim you have finally managed to scratch my itch. As a multi kruzer user I was thinking of upgrading to a nox. I now think that I will wait and see what nokta makro comes up with. Great video as always. Good luck and happy hunting my friend 👍
@uksavvy3 жыл бұрын
Think your review pretty much sums up my view on the Nox 800. It's a capable detector but leaves me wanting more. Always feel a bit uninspired using it. You always dig up loads of crap with it too. The E-Trac, Whites V3i and Deus you really can read the signals more, they give so much more information of what's in the ground. I think the young'uns would describe it perfectly by saying 'It's a bit Meh!
@biggazza82683 жыл бұрын
I was all set to get a nox 800 any day now, but I mostly detect ploughed fields ( my only permission ). I do like detecting beaches but my nearest beach is 70 mile away and is fifteen quid in petrol each time I go, I currently own a simplex . Not sure what to do now🤔
@joeryan63273 жыл бұрын
interesting Thank you
@AndrewPattullo Жыл бұрын
Got rid of 540 as awful audio response .. watched another nox800 vid ....and got the same awful audio... my conclusion must be this new multi iq ... As been an minelab owner for 30yrs... and will stick with a machine with full fbs... as the audio modulation is fluid..... not like a kids toy....
@erniepolloreno7373 жыл бұрын
Grim thank you for the run down on the Nox 800
@istvanbliss15613 жыл бұрын
I’m thinking if buying the nox 800 but what other machines would you say that are cheaper that do the same job as the above ? Thanks
@deepee423 жыл бұрын
My thoughts exactly, I know about weakness in the coil lugs breaking as mine has broken & feel the same as you do about it, now its always on my mind thinking of getting some lug supports are these a good option? on the stem I've replaced stem with carbon fibre & they are fantastic in reducing size when transporting Ive found some great items with my Nox 800 only downer is I dont have a permision as my last the farmer used his wife to give me the bad news revoking my permision hes loss lol keep up the great vids always have to see you say Good morning Good afternoon Good evening where ever haha
@danielsmith90883 жыл бұрын
Is the multi frequency as good as any other machine you have tried? I have a Garrett at pro dated but works great. My only issue I have is hitting coke. What machine do you think is good for ignoring coke on ploughed field which is where I normally detect
@stuartbibby44153 жыл бұрын
At pro not in the same league, nox dont pick coke up it can hit a cut quarter under a pile of coke, multiique is very good it dont miss much, coil lugs breack by overtightning, had mine a couple of years now and it does a great job on any land including plough, its takes alot of getting used to, it does require a very slow speed sweep, best pasture machine out there recovery 3, feild 2, iron biase 0, sensitivety 24, 23, it also does not report iron on non ferrous sorry but most machines do, it can see through minerals,
@metaldetectingqueensland12333 жыл бұрын
Cant beat the simplex for durability and at half the price...performs better in some circumstances than the nox I have seen them both tested against each other and they're pretty even in my opinion...nox for the beach though...Mr Grimm how much land are you avoiding simply because of the stress of breaking the machine? I asked myself this when considering an upgrade from my simplex...but I saw how flimsy the build quality was and quickly skipped on to something like the daus or this new Gauss that looks amazing for around the same price...but I'll watch for those reviews too before I make a choice or not make a choice to be fair as the simplex does everything I need it to do in these harsh conditions in Australia...cheers Mr Grimm a comprehensive review and one that honestly has turned me off the nox even more 😊👍🏻
@SunsTo72 жыл бұрын
Hey Grim you are right, Mine Lab has dropped the ball on the build of this machine. Such a great detector with such a crappy unreliable build is wrong, just to increase profits. Now simplex Nokta has the right idea , their machine is perfect build is perfect. Watch out Mine Lab competition is about.
@rivercitymetaldetecting98542 жыл бұрын
Simplex is nowhere near the machine the Nox is from a tech perspective lol. You are talking a single frequency machine vs multi. Go to some really hot soil or hit a wet saltwater beach with both and you will figure it out. You will have to dial the sensitivity back on the Simplex to stabilize it which is common with single frequency vlf detectors. Yes the build is a lil iffy with the Nox but everyone I know who swings them religiously gets an aftermarket carbon fiber shaft for them. Also, a coil ear stiffener is a must imo. I even run one on my CTX regardless what coil I am running on it. Erring on the side of caution is better than downtime waiting for a new coil to arrive.
@Makewomensaneagain2 жыл бұрын
@@rivercitymetaldetecting9854 Where did you get the ears from
@rivercitymetaldetecting98542 жыл бұрын
@@Makewomensaneagain the stiffeners? I found someone in the UK who 3d prints them.
@Makewomensaneagain2 жыл бұрын
@@rivercitymetaldetecting9854 SWeet got as 3d printer so may find the pattern for it.
@rivercitymetaldetecting98542 жыл бұрын
@@Makewomensaneagain yeah, they aren't hard to make.
@ethanguidry3123 жыл бұрын
Hey 👋 I have another question. I’ve been learning my new equinox 800 and becoming more familiar with the settings it has to offer. I was trying to set multiple user profiles on my detector but it only allows me to set one. On the box it says you can set up to 8. (I made a coin shooting setup in park 1 mode, then when I tried to make a field setup in field 2 the park user profile went away and the detector sets my user profile to the field one) are you able to set multiple user profiles? Any help would be much appreciated!! There’s are no videos on KZfaq on how to set multiple user profiles, nor does the manual explain how to
@robyruk3 жыл бұрын
What cheaper machine would you recommend
@THEGRIMBLEEPER3 жыл бұрын
NOKTA Makro simplex is a good starting machine buddy:)
@robyruk3 жыл бұрын
@@THEGRIMBLEEPER thank you
@johan195013 жыл бұрын
V3i is still the best machine!
@lpmetaldetecting3 жыл бұрын
My lasting memory of your review is that you think magnets are modern... must be a Kent thing ;)
@thetoffeedigger3 жыл бұрын
😂😂😂😂😂😂
@scottowens6563 жыл бұрын
Your review was brilliant, I think lp should give you a deus to review and keep.
@johnmilton20773 жыл бұрын
so what's the best for around $1K/740£, give or take a couple hundred?
@savagesquirrel98283 жыл бұрын
I would love your opinion on the Mine Lab SDC 2300. Would it be better than the 800? Yes, I know nothing😀
@mikeedrich82563 жыл бұрын
So what IS your favourite machine if the Nox 800 is only so-so? Mike
@Ghost-hp4jc3 жыл бұрын
Your getting a £1500 machine for £879 , you want all the issues fixing as standard and you’ll be paying that £1500. You don’t know it well enough matey, once you do you will wonder why you ever said It dosnt perform well on ploughed land
@anthonyharrison92803 жыл бұрын
Love my 800 and found some lovely stuff but I still say it’s a rolls Royce engine in a robin reliant body . 🤔
@bleepingfun3 жыл бұрын
Great review My friend :)
@lavernelesznik67503 жыл бұрын
Did you find out what the decorative cross was?
@NathanielOutdoorAdventures3 жыл бұрын
Great review
@raymondpiper82943 жыл бұрын
Have you had the deus yet ? Would love to see you try it for a while👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾
@kevp30113 жыл бұрын
The deus is the most flimsy detector I've owned, always breaking stems and coils. My 800 I've had 2 years and is solid apart from one charging port pin that corroded which I now always have a smear of vaseline on it.good vid grim.
@silverpro83563 жыл бұрын
What do you think is the better detector Kev ?.
@thetoffeedigger3 жыл бұрын
A good honest review Lukus...when are you back out on the Anfibio ;) I would love to see a review of this and a video regarding settings. #thetoffeedigger
@TheDarkKnightDetectorist3 жыл бұрын
Well seeing as the only machine I've owned to date is a simplex, I still plan on the big jump up to the nox. the interface looks as user friendly as the simplex which is a must for me. the tones are nice and soft like an R2D2 type robot compared to the simplex tones that are like an angry chicken. dont get me wrong, I love my simplex but I'm going all in on the nox800. thanks for your honest review mate.
@stuartbibby44153 жыл бұрын
Take it your new to detecting, the simplex is a million miles away from a vanquish never mind a equinox, but in all honesty i have been detecting 40 years it took me around 100 hours with the nox to start to gel with it, if you wont to try the multiique i would get the vanquish 540, first its a very good starter, o and on the nox yes this machine when masterd is a excellent all-rounder, i bought a simplex to see what the hype was about, identified twelve non ferrous targets in a dense iron patch with my vista warrior, the simplex only manged to get one of them, i did not put it up aginst the nox as some did pointless, nox would destroy it on any target, but to be fare its a cheap starter machine, ok for a first machine, simplex was sold after two weeks,
@TheDarkKnightDetectorist3 жыл бұрын
@@stuartbibby4415 detecting a year mate. the simplex has done me good. got 6 silvers so far (2 hammered). yes I think when I get the nox I will be starting all over again with learning, but if you dont learn to wLk, you never will. im looking forward to starting the new year on the nox. and having someone like Grim do a balanced review is good for everyone thinking of going over to the nox. Happy hunting.
@stuartbibby44153 жыл бұрын
@@TheDarkKnightDetectorist been at since 1979 mate, just be patient with the nox just got three hammered in one session, its the multiique far better than anything i have ever used, i recommend giveing one a go, but be aware it aint no simplex its a very steep learning curve, revert it to secondond up date version, now run it in feild 2, 0 iron bias recovery 4, sensitivity 20, just go over your old ground and see what happens, you will be astounded, use 5 tones cheers good luck
@a.g.93603 жыл бұрын
Get CMD carbon shaft :p
@kencarter1903 жыл бұрын
Nice one Grimm KEN.UK
@davependleton42983 жыл бұрын
It would be helpful if you explained what the problem is on ploughed land. “It don’t like gaps” isn’t very helpful 🤷♂️
@lavernelesznik67503 жыл бұрын
I don’t think we have the Nox here
@beneathourfeet38153 жыл бұрын
lug strengthener and an after market carbon shaft, problem solved
@Poochpurtill3 жыл бұрын
??🙏
@tonysibley95243 жыл бұрын
How bizarre! I've got a Nox 800. Never heard of coil lugs breaking. What happened today!? Coil lug broke on my 15" coil. Less than 2 years old!! Not impressed, will be on the phone to them tomorrow!!
@nigelsimon5973 жыл бұрын
get the ctx next
@wolfshead1003 жыл бұрын
No that is dated, almost a museum piece.
@oldplucker13 жыл бұрын
Nox is better
@Ghost-hp4jc2 жыл бұрын
Grim, your spouting bollox 😂. Pasture is its home , nothing comes close to its performance on pasture . All I can think of is your setting must be wrong matey . In reality the equinox is a £1500+ machine , so to make it more affordable they had to use lesser quality materials for build to keep costs down .
@THEGRIMBLEEPER2 жыл бұрын
Honestly stand by my review a year on …. And still using it in almost every video spouting bollox I think not :)
@Ghost-hp4jc2 жыл бұрын
@@THEGRIMBLEEPER ..just a bit of craic matey 🤪👍🏻. Using field 1, rec 4 iron 2 on pasture is unbeatable really 👍🏻
@benelmana20153 жыл бұрын
Don’t buy this defector unless want to pick up trash this people are gold diggers for sure hope they get Sue
@TheHUhelps2 жыл бұрын
The problem is that Runaround Sue is hard to get. 🤗