You know I've been following you for a while and watch all your videos and I love them. I love that it's sort of a family thing. Anyway I've been working to come up with a larger tank capacity without needing to hold one in hand. This was exactly what I had in mind. You have perfect timing. You seem to have more time to do these things than I do so I kind of live vicariously thru your videos sometimes, lol.

I just love how you leave in your bloopers. Makes me laugh while getting great info.

I was thinking about the kids and how helpful this was for Bath-time and Mrs. HDC took the words out of my mouth! Great job!

What a great way of knowledge-sharing. Thanks very much.

Outstanding information Darwin! You are dang sure onto something BIG buddy!

Nice work bringing this to the DIY community. I looked at some of the Chinese/Indian foam generators years ago but didn't have that kind of cash to throw at it. Cool to see it whipped together like this.

That is awesome.

Guys, you have great sense of humor. Thanks for your great shares. (Thumb Up for U)!

Hmm. Thanks for speeding up, good to see and doesn't take as long.

great info!

Hello friend, I became a fan of your channel, you have helped me a lot and you are helping me a lot in my project. Since I found you on KZfaq, I follow you every day I congratulate you for the work you do, and I congratulate you for your beautiful family, A big hug from Argentina

Excellent video Darwin, my question is do you think I can pump my foam agent into the foam mate front assembly and just use a needle valve to control the soap and air supplies? Thank you again for your assistance videos and your inventive/experimental content *Honey Do Carpenter*

Monolithic domes of Italy Tx Has a cement mixer that also pumps thru a hose.

lol...love your laugh man!...oh and yes and the kids looks like they had a blast...good idea!

A tire inflation gun cobbled somewhere into that plumbing could be handy. When you want a constant "on" just put a rubber band around the trigger / handle. I'm thinking of putting a tiny 1/4 inch nozzle on the end of a foam mate and seeing how far I can lob foam into my neighbours yard...

You sir are a genius

Thank you

THAT'S THE TICKET WAS JUST ON SKETCHUP TRYING TO WORK SOMETHING OUT LIKE THIS. YOU COULD EVEN PLACE A SHOULDER STRAP ON THE TANK. EXELENT !

awesome video guys !!

nice family good work ......

Oh Yeahhhhhhh (Like that for sure)

lol I was laughing at the 4 18 mark where your Dirty Hen showed up, "poof" all that dust, was it in the cement bag, love the videos.

Good Clean Fun

Honey Do Carpenter, I really love your videos. I like how the entire family is part of it, even the chicken. My name is Adolfo Ramirez from Cabarete in the Dominican Republic, and I watch your videos. I want to build my own Aircrete machine. Keep up the great work!

Very good, children also enjoy with parents.

Workshops!! i know 100's of folks would pay to attend a foam mate build workshop.. here in Black Mountain NC they have alternative building workshops. Air crete is DEFINITELY alternative building..

i helped with a foam and protland cement concrete tunnel for a train. the contracter was used for light weight concrete for airports......

I have been watching for awhile. One question I had was whether the foam could be added to the mixer with the slurry and therefore skip the barrel part.

A very small shed please to lock my wife if haha JOKING i love her MUCH ,once again amazing thank you we love every video you make.Paul.

Your a cool dad!!

That's a great idea. How long do you think the mixture would be good in the tank if you didn't use it all at once? I love your kids.

This is similar to microsoft. Great, great work and invention.

Great

I've been watching your videos and I may have missed it but what is the soap to water mix ratio Air psi And foam to concrete ratio Thanks love the videos

New sup here, glad I found you. Here's an idea... you know those sprayers the gardeners use? Some are large and like a backpack. You can put your solution in a backpack sprayer tank so you just have a wand to hold. Might make things easier.

I would expect you to give the foam to the boys and have them wash the equipment and the cars LOL ;-) I was thinking about the bath while they were playing just before it was mentioned.

You make good videos.

I am wondering if you had to puncture the bladder in the well mate tank?

I wonder if this aircreet is buoyant enough to build a floating house on. That would be pretty awesome

Could you tell me how much foam do you need to for a yard of concrete if you don’t mind

according to Drexel they say 8oz per gallon might be better when mixing for AIRCRETE 12-15oz to 1 gallon and 50-70psi

What bit did you use to do the tape and drill in the pvc?

Ever thought about showing up at a Makerfaire with a bit of a booth or running presentations outside of the makerfaire building? It might help things is why I mention it. It would rule to incorporate aircrete in with a mobile 3d printing platform too. Cheers from a field near Windsor in the land of Ontario on this vast planet. \V/_ Groovy tunes!

My husband is no longer and I am needing to build a home. I am very interested to see how one could build a roof - dome shaped. If I want to fire proof the roof, would I put liquid glass on the outside ? Can you make it? Is liquid glass expensive?

Great way to get them to take a bath.🤣👍👍

I have the large foam mate, what PSI should I set my compressor to?

Can you use plastic scrubby's pads instead of steal wool?

THAT is a ton of foam! Great job, Darwin!

have you used concrete densifyers on air Crete.

squirt straight into cement mixer ( with bigger paddles) simples !

I hope it works with regular Portland Cement. I know that you are using Portland CEEment. 😀 just kidding Darwin. 😎 Another excellent video.

It sounds like you said you added j lube... That is a powder lubricant? But why and at what ratio?

Question can you streamline the gun with the tank and not make it two separate entities and then all I have to do is just run a hose from it to the barrel that's my question?

What foaming agent did you use?

hi Im From indonesia.. I really like your content!!!

What is your mix for the tank ?

Is it possible to creat nice enough foam for aircrete using a bucket and a drill??? I dont have the money to buy and air compresor :c

May I get clear idea , what is foam agent ?

What size tank would you need to make a 18x18 round Dome house with a rebar and chicken wire frame.12 high.

I was wondering if bubble solution that u buy at like dolor tree for kids to blow bubbles would produce the right bubbles for the foam solution to make make aircrete!

Is foamed shotcrete possible?

What is the estimated cost of the shed. Do the walls weigh allot and do the walls have to be that thick?

The weight of the foam is critical to the cement mixture . The claim is 90 grams to a 8oz cup.

How can I find more DIY detailed info? How could I spray aircrete into frame for shed insulation?

Hello, for 90lbs or 40kg of Concrete, how much water d how much foam i have to had ? Thank you.

Suave hair shammpoo is the foam solution.

can i use this for foam car wash?

Do you use a smaller fitting and hose on the side?

Olá amigo tudo bem, amigo como eu adoro ver seus vídeos, pena que a sua linguagem é diferente da minha, eu não entendo nada, sou Brasileiro e preciso fazer isso para fazer espuma para o cimento leve, mas pelo sua bela explicação eu entendo o que precisa para fazer isso, abraço amigo 🙏👏👏👏👏👏👏

أتمنى لك ولأسرتك السعاده الدائمه

what pressure do you use from the compressor ?

Quantos litros de água.e qual % de aditivo ou seja qual % de diluição vc usa Irmão)

I wish I could come up with the money to buy one .. Hard to when I'm on disability living on a small income .. I only need the normal size one

Can aircrete be mixed/folded in a concrete tumbler/mixer?

I can't tell, does it run off an air compressor or a garden hose?

Hey Darwin. I bought your foam mate and am having trouble making adequate foam. I am shooting for 95 grams per quart and even hit that mark quite often, but the foam seems too runny and after only a couple of minutes a significant amount of water settles to the bottom of the quart. The best block that I have managed to make so far maintained its shape but had some big bubble gaps throughout. I really want to make this work, so any advice you can give me would really be appreciated!

Rural king store has " DREXEL " GALLON FOAMING AGENT SELLING @ $30.00 + MAYBE SHIPPING COST

Why not just a aquarium air stone and aquarium air pump?

Can I just make a comment about solvent cement fittings, I don't know what you call it in America. The glue for plastic pipe, I used to teach plumbing in a college. NEVER put the glue in the fitting, always on the Pipe an give it a twist. Just a mute point, when you put it on the fitting it curls up inside and restricts the flow. Great Vids.

Is that a Super sized Latte?

Man, I hate when KZfaq breaks into your videos. .. I seldom watch KZfaq anymore because of that. Love your FoamMate

what do you use to make foam

4:20 Looks like you shot your chicken LOL

Honey Do Carpenter: I looked up recipes for making large and strong bubbles and found this one. I wonder if you could try it for aircrete foam generation. A PERFECT RECIPE for MAKING VERY STRONG BUBBLES Ingredients 1 liter of water (about 2 pints) 50 milliliters of Dawn Professional Detergent (a little over 3 TBSP) 2-3 grams of guar powder, a food thickener (about 1/2 heaping TSP) 50 milliliters of rubbing alcohol (a little more than 3 TBSP) 2 grams of baking powder (about 1/2 TSP) Directions Mix the guar powder with the alcohol and stir until there are no clumps. Combine the alcohol/guar slurry with the water and mix gently for 10 minutes. Let it sit for a bit so the guar hydrates. Then mix again. The water should thicken slightly, like thin soup or unset gelatin. Add the baking powder and stir. Add the Dawn Professional Detergent and stir gently, to avoid causing the mixture to foam.

कौन सा केमिकल मिलाकर बनाते हो हमको हिंदी में जरा बताओ आपका वीडियो बहुत देखता हूं और बहुत अच्छा लगता है लाइक और शेयर करता हूं यह इसको हमको भी लगाना है जरा मेहरबानी करके हमको बताओ प्लीज प्लीज प्लीज

Me: "I will keep this option which is the only option." Bad English but correct grammar.

Watch the chicken at 4:20

How to get kids to take a bath. :)

Are you having classes to teach people

Wanting to try to do air-cobb giant legos to build homes for low income and homeless. Looking to find MacGyvers, Mythbusters and Bill Nyes to join us to help

o a secret my camera just went off ups ..trade secret.....

Rual KING STORE FOAMING AGENT DREXEL FM160 PRICED AT $30.00

What foam, surfactent did you use in this project

الترجمه تحجز الصوره

I know this video is a year old but can someone tell me what is going on with the chicken? What happened that it got so dirty? Did a dog bury it or something?

How to clean boys 101

Man. That chicken was dusty

You didn't really want us to learn how to make that foam making machine (cuz you are selling it).

Hello Thank for the great information you kindly give us. Can i dirctly contact you by whats up . I am from Saudi arabia Thank you Saleh

Why not just use a car wash foam gun?