T40 Honda Honwave speed excell 335 speed test maidens lighthouse Larne County Antrim Yamaha f25 outboard
Пікірлер: 50
@TheReelIsle10 ай бұрын
Great vid mate. I'm looking at buying one of these trailers
@ryanferris784110 ай бұрын
Thanks! That particular trailer makes things so easy I highly recommend 1
@kingkong-vy4hdАй бұрын
@@ryanferris7841 Really enjoy your videos. How much do the trailers cost ? thanks.
@ryanferris7841Ай бұрын
@@kingkong-vy4hd hello thanks for your comment, my trailer came with the boat as a package so I am not completely sure on the separate cost of the trailer!! However with a quick search on google they are in around £1500 🙏
@rikutaskinen54327 ай бұрын
Nice trip...
@christopherryan26285 ай бұрын
Nice video Ryan! Thinking of getting a honwave for convenience. Have you ever punctured your rib with fishing hooks? Are they prone to this? Cheers
@ryanferris78414 ай бұрын
Hello, I’ve never punctured it with a hook small stones and some jetty’s can be a problem tho! However they are fairly durable
@andrewhenderson896311 ай бұрын
Hi. Great video. Do you have a link to the inflatable seat please
Hello Ryan! I have just placed an order for this boat. Please, let me know if the engine touches the wheels at any position and where can I get the same wheels as yours. Many thanks, Ned
@ryanferris78414 ай бұрын
Hi Ned thanks for watching be sure to hit that subscribe button 😄😄 the engine clears the wheels in every position www.ebay.co.uk/itm/225230670207?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=E48ybevcS06&sssrc=4429486&ssuid=HM3r7bI4Sgq&var=&widget_ver=artemis&media=COPY
@nedgeorganas4 ай бұрын
That was fast! The wheels on your boat look bigger diameter, right?
@ryanferris78414 ай бұрын
@@nedgeorganas I changed the actual wheels to solid hard tyre wheels because I got a few punctures the diameter only appears bigger because the tyres have a flatter radius in comparison to the originals
@nedgeorganas4 ай бұрын
@@ryanferris7841 Thanks Ryan, would you know the T40's transom height? I plan to fit an Evinrude etec 30 and calculated the required minimum transom height so that when the boat is on the wheels the engine does not touch the ground. The minimum required transom height is 478 mm, assuming that the wheel bracket is mounted at the lowest edge of the transom.
@ryanferris78414 ай бұрын
@@nedgeorganas no idea the transom height! However I need to tilt my engine to clear the ground
@stevesdaysoff27598 ай бұрын
Hello Ryan. Does your Nautic seat move out of position at all. I have the T38 IE3 with an inner beam of 80cm, so Nautic seat of 82cm is the closest fit for T38 IE3. Do you know anyone with the Nautic seat in the T38 IE3. Any thoughts would be appreciated. Thanks Steve 👍
@ryanferris78418 ай бұрын
Hi, unfortunately the nautic seat isn’t great on a T38 because the T38 hasn’t got a flat floor it causes the seat to bellow and flop about, however it will sit snug between the tubes the seat also has lashing points 👍
@stevesdaysoff27598 ай бұрын
Wounder if I could put a flat peace of wood underneath the seat to give it some support or change to the T40. Thanks for your comment Ryan is much appreciated. Thanks Steve 👍
@ryanferris78418 ай бұрын
@@stevesdaysoff2759 you could put a generous slab of wood between the tubes to create a deck however it would need to be a snug fit and at least 3/4 of an inch thick! However in my opinion the T40 is a far superior boat good luck 🤞 👍👍
@stevesdaysoff27598 ай бұрын
@@ryanferris7841Thank you Ryan for your input. Looks like im heading towards the T40 with the Seamax deluxe transom wheels. Thanks Steve 👍
@richardvandergraaff139410 ай бұрын
great video!
@ryanferris784110 ай бұрын
Thanks for watching
@user-pf7ct4we5l9 ай бұрын
Qual o diâmetro, desses Tubos ?
@ryanferris78419 ай бұрын
49 cm
@JOSE-bx8bh6 ай бұрын
Hola ¿El motor es de cola larga o cola corta? Gracias
Hi I've just got the same with long shaft to use with both my 14ft wave rider and honwave, I also have a 10hp honda for honwave but fancied using the 25 for both but with the long shaft it kicks up loads of water into the boat at higher speeds can't keep my launch wheels on the back it deflects water straight into boat.... it usable if I want to tow or have extra onboard but not ideal I assume yours is the short shaft version looks much better?
@ryanferris7841 Жыл бұрын
Mine is the short shaft, to use a long shaft effectively you will need a riser plate to lift your engine 😄
@andrewtaylor96747 ай бұрын
Top speed?
@ryanferris78417 ай бұрын
I mention top speed in the video 👍
@inaborges299010 ай бұрын
"promo sm"
@martinsmyth558010 ай бұрын
Hi, is the engine long shaft or short shaft.
@ryanferris784110 ай бұрын
Short 👍
@WokeYtube11 ай бұрын
That engine is overkill. Your back plate engine stands on will aventualy come loose from floaters.. 15hp was more than enaugh.. I have had 25hp Yammy and was 85kg beast.. Its crazy heawy..
@ryanferris784111 ай бұрын
Actually you are wrong my transom is rated for 80kg and my Yamaha F25 is less than 60kg! Thanks for watching
@flamintasty11 ай бұрын
I love it when online experts tell owners how they’re doing it wrong. I actually asked Honwave why the IE3 says it’s rated at 25hp, while the IE1 and IE2 are rated at 30hp. Honwave told me the IE3 is still rated at 30hp, despite what it says on the aluminum plate.
@WokeYtube11 ай бұрын
@@flamintasty 22jears of work at Brugge Marine center makes me ?? yea right bro..
@ryanferris784111 ай бұрын
@@flamintasty I will go with what Honda says! Honda are a reputable company 👌
@flamintasty11 ай бұрын
@@WokeYtubeWhat were you doing, mopping the floors? That Yamaha outboard weighs 57kg, it is the lightest 25hp outboard on the market. There is no problem using it on the T40 in any way, shape or form.