One could even argue.... that the 6.5 PRC is a "reinvention of the wheel" or the older 6.5 Remington Magnum. Short action, fat case, no belt, proper throating with a fast twist barrel, long throat to accommodate the longer 6.5 bullets..... all at similar velocities. It's almost like everything that was "broke" with the 6.5 Remington Magnum, was fixed with the 6.5 PRC! My 6.5 Remingtons ALL shoot well.... I look forward to checking out the 6.5 PRC someday!

Would be awesome if Hornady would raise the production numbers on the 6.5 PRC.....

I have two 6.5 CM, one in AR10 the other is a bolt. My next two long gun purchases will be the 6.5 PRC and the 300 PRC. Thanks for creating those cartridges!

Love my 6.5 PRC just with you made more ammo available to buy! It is always out of stock. This is so easy to get out 500 yards with your ELD.

I certainly hope the 6.5 prc production increases exponentially because deer season starts in a matter of a couple months and the ammo is hard to find and when I do find it it crazy expensive. Looking forward to trying the 6.5 prc on deer for the first time this year.

I had Gap build a do-all 6.5 PRC for me and chose it over 4s for factory ammo options. It is a great rifle. About the time it arrived, the ammo dried up…I should have bought a .308 or enough reloading components for a barrel life. I hope you can catch up on ammo soon. I really want to love this rifle and cartridge.

Let’s make more PRC ammo…

Bought my 1st long distance gun to shoot steel in 6.5 PRC w/ 200 rounds today. Can't wait til it all arrives.

I m a welder. Also did factory manufacturing. Actually worked for an ammo company Would like to see more of the factory!!

Sad, the eye of man is never satisfied... now I want one.... Your doing great Seth

Shot my PRC for the first time today. Shot all factory 130 Barnes TSX 142 ABLR 143 ELDX 147 ELDM 156 EOL All shot MOA or better. Very impressed. 156 EOL’s and 143 ELDX’s shot the best. Both shooting under 3/4” 5 shot groups. I honestly couldn’t believe it, very rare to find that from such a wide range of factory ammo, in a factory rifle.

Inherent accuracy is rare in a big game class. The cartridge is remarkable. Home run. I've never seen a cartridge like such a wide variety of burn rates even getting to 8133.

Would love to see more 6.5 prc being pushed through production. Almost impossible to find ammo.

Thanks for the information on the 6.5PRC. This is my introduction to it.

I Have 4 In 6.5 PRC’s In 26 Inch Barrels. Everything From Coyotes Hogs Whitetail Mule Deer & Elk Recently. This Is My Long Real Estate Precision 1200 & Some Change. My Go To Bolt Rifle All Day & Night Long. Great Information Coverage 👍🤛🇺🇸

Just about everything is back on the shelves, but finding 6.5 PRC ammo is still damn near impossible. It's one of the most popular calibers for new gun sales - how is Hornady (and others) somehow not getting that message and ramping up production? The supply/demand still seems way out of wack for PRC.

Bought a Bergara 6.5 PRC 2 years ago . I finally found ammo last month I grabbed all 6 boxes . Now I need time to shoot it . More ammo production please …!!!

I had a 6.5 creedmoor but sold it and now have a 6.5 PRC that I haven't shot yet. I didn't have a problem with the Creedmoor, I just wanted the extra power for hunting and now that the PRC ammo is on my local store shelves, it pushed me to buy one.

My all time favorite cartridge

My 6.5 PRC really took a shine to your 130 gr CX bullet in my handloads . Purchased some 143gr ELD X Precision Hunter from the same lot to obtain brass. That factory ammunition shot extremely tight groups Excellent ammunition

Great pod

The Winchester Model 70 WSM magazines accommodate this cartridge length Perfectly.

It blows my mind how many 6.5 prc rifles are in the shelf no wonder I can’t find brass for it

Thanks for the video!

Tell us about that 7 PRC 😉!

Great information. Very interesting! I don’t understand the statement about the downside of faster twist rates when he mentioned “dispersion”? Someone please explain

Getting ready to purchase my 2nd 6.5PRC . thank god I'm a reloader. Cause in the past 2 years I have only seen 2 boxes of 147gr ELD-M on the shelves.

Love my prc waypoint…

Love mine but getting a box of their ammo in Idaho have found some in Oregon but only 2 boxes my long list of friends have sold me some brass but that's it been thinking about swapping the barrel out to 300 wsm just to shoot more.

Awesome, a podcast about imaginary Hornady ammo!!!

What powders are used in the factory 143 ELD-X and 147 ELD-M ammo? I found some 147 bullets to reload but no 143's. I was able to buy a couple boxes of the 143's and 147's a year ago, but 6.5 PRC must be so popular that it doesn't even make it off the dock to the shelves...sigh

I have a 6.5 Creedmoor, about to buy a 6.5 PRC and saving money for a 7 PRC.

With Respect, It's funny watching You youngsters so happy rediscovering the Swedish mauser = 6.5x 55..

What barrel length would you recommend for a mountain hunting rifle

I can’t wait to hit the field with my 6.5 prc model 70

My new Browning s bolt Pro will not shoot the 130g CX. I consistently get 3"+ groups. The 143g ELD-X I get sub 0.5" groups. I love that ELDX!

Just wish it was more available

I really love my 6.5 Creedmoor and I would like to know what is so definite in the 6.5 PRC ???

I like what Hornady was trying accomplish with the 6.5 PRC. However, back in 2017 you have a video of George Gardner on your channel stating that the 6.5 PRC is the best option to run high BC bullets in a short action. I feel that Hornady rushed this cartridge to market without looking at the possibility of future bullets such as the 156gr Bergers or Hornady's own 153gr A-tip. These heavy bullets need to be seated deep in the 6.5 PRC case to be magazine fed in a short action. I would like to see Hornady adopt some of the 6.5 Sherman Short cartridges. These cartridges are much more well suited for a short action. I seen load data on 6.5 SST that gets at 156gr Berger to 3020fps and the 147gr ELD-M to 3100fps. While the Sherman cartridges have no SAAMI standard, I think they could be made to SAAMI standards and run around 60-65ksi. Hornady should definitely consider looking at these cartridges.

Perfect example of shortening barrel life. If you MOSTLY hunt with it, no problem.

I would really like to see yall flood the market with the 6.5 Creedmoor ammo because I can't find ammo for my rifle or can I buy from yall ??? And it would be nice to hear back from someone from your office about this and looking for hunting ammo at is very accurate.....

I was interested in the 6.5PRC, but decided a 7mm PRC was more suitable for my hunting

Hello sir, thank you for wonderful conversation I am lessening, but all PRC ammo is very expensive retial is selling?

I would build an ELDx that won't come apart at the velocities the PRC shoots. Maybe bonded or 155gr maybe?

I have two 6.5 PRC rifles. One for the range and local hunting, the other for my special hunts. Ireally liked the idea of magnum performance in a short action. I have read that some gun powders actually require magnum primers. Is that true and if so which ones? What is the truth about an 7mm PRC coming out? I didn't want to buy another rifle but I would have to have that!

What is the recommended barrel length where velocity doesn't suffer?

Have y'all fixed your chambers yet at the 200 line?

I’m very much on the fence between a 7mm-08 and the 6.5 PRC.

A fast twist increases bullet dispersion, im pretty sure that Bryan litz and applied ballistics has proven that incorrect.

Yall need to make more boolats and a wider choice of bullets for the PRC like when yall gone do a SST GMX or Cx

Merci

Any plans on 277 prc or 277 creedmoor cartridges

I'm searching for a very long and heavy projectile 338 Lapua Magnum. Something for extreme long shooting only. (NO HUNTING). WHAT WOULD YOU RECOMMEND???

When yall coming back with thr interbond line

Any news on a 7mmPRC?

Hey I developed A 50 BMG bullet that needs a BC calculator of at least 1.4. Why do you only go to 1.2. This bullet starts out at 2750 FT/ sec and at 1000 yds it is still going 2700 FT/sec.?????": I need help thank you.

So with the evolution of the 6.5 prc, and with the 7 mil PRC coming out. How will that affect the people who is having trouble finding 6.5PRC ammo? Would the design of the 7mil PRC overshadow the 6.5PRC, would that make the 6.5PRC obsolete even though the 6.5PRC is still relatively new on the market and people are still hesitant on getting a rifle chambered in 6.5PRC. I know I would love a 6.5PRC but hesitant on investing in the caliber not knowing if that caliber will stay around. Is more ammo manufacturing companies going to start making 6.5PRC rounds to buy?

You guys ever going to make ammo for the 6.8 western would love to see some outfitter or superformance cx ammo line for it?

Would love to see more consistency in hornady bullets. My box of 143 eldx was +-2 grain spread and ogive was all over the place.

🤠 Ronbo (Montana Mountain Man) - I want to Congratulate Horneday on the choice to make the 6.5 prc, 6.5 Creedmore, and 6 Creedmore! And also to remind you of WHY these cartridges are so successful, as to INFLUENCE YOU on Any Future Cartridge Development as to WHY that is so! If you look at the Best Selling/Most Popular Cartridges in the Following Calibers, You Will See a Pattern: 30 caliber - 308 Winchester; 7mm caliber - 7mm-08 Remington; 270 caliber - 270 Winchester; 6.5 caliber - 6.5 Creedmore; 6mm caliber - 243 Winchester (mabey the 6 Creedmore, some day?); and the 223 Remington! What do ALL THESE CARTRIDGES HAVE IN COMMON? They are ALL MILD RECOILING CARTRIDGES! Why? Because the VAST MAJORITY OF HUNTERS AND SHOOTERS DON'T WANT to hunt/shoot/or need self defense with A BIG MAGNUM, unless it is absolutely necessary! For most of us, especially if we hunt in the lower 48 states, it isn't necessary! So, if you WANT TO MAKE THE MOST MONEY AND DOMINATE THE MARKET, keep your FOCUS ON THE MORE PLEASANT SHOOTING CALIBERS! Most of us will never be going to Alaska or Africa to hunt dangerous game anyway! Besides, my Grandfather killed Grizzlies (and Record Book Bison, Moose, Elk, Sheep, Mount Goats, etc...) all with his 270 Winchester! That would include more than 500 elk while working on the firing lines near Yellowstone Park culling elk herds (Including Alot of Very Big Bull Elk)! So, nothing more is needed for lower 48 game animals! Certainly not those "Big Magnum Cartridges", even though I've owned a few (I found it out from 45 years of hunting experience and from my Grandfathers before me)! They are not worth your time, effort, and money! Nope! Let's keep the cartridges "practical" and the prices "reasonable"! 😁

Bergara b14 in 6.5 prc currently in the safe lol wooo!

Almost as good as a .264 Winchester Magnum!

Is the 147 eldm the heaviest bullet you will make for 6.5?

I love my 6.5 PRC I took it out to a competition/ class and using factory Hornady ammo I was hitting milk jug targets at 1500 yards and a mile. Too bad that ammo is almost $6 a round now

I need one to go with my 338 RCM.

We want a 7mm 190-195gr ELD-X

You needed the 130CX because the 127LRX is the tits!

Hard to find 6.5 PRC ammo that's why I have a 6.5 Creedmoore

I know I probably missed it but what’s the difference in the X vs the M…I know one’s for huntin and one for match but what’s the actual differences…

6.5 prc is cool, but how about the 20 practical?

Is the 6.5 PRC A barrel burner? Or Is that just hype?

Talk about 8.6 blackout please

I wanna see a 6PRC

PRS Shooters are shifting back to 6.5s.

I’m waiting on the 6 PRC.

Looks like everyone is having trouble finding ammo so might just go with the creedmoor

What about a 22 PRC with a magnum bolt face??? Maybe in the future???

Just get a 264 mag. I’ve been using one since the 1990’s.

We don’t come out with a cartridge, just to come out with a cartridge. Hehehaha, yes you do!

I want one

Still cannot buy 6.5 PRC brass that Made by you what’s the deal don’t seem To remember The reloaders

I have a 6.5 PRC Browning X-Bolt Pro with a 23" barrel (muzzle to receiver W/O brake). with its pencil thin fluted stainless steel barrel it will give 3/4" to 1/2" groups at 100 yards FOR THE 1st THREE SHOTS. Then the skin barrel heats up and groups open up to 1" and 1.25". Still that's not bad and if I can't get my game with 3 shots I need to find another hobby. My competition rifle shoots 6.5 CM even better with its much heavier barrel.

Why doesn't hornady build rifles too? With the brains to design and build the whole creedmoor, PRC line and the chambers to go with them, why not go all the way?

I've been looking for 6.5 PRC ammo for a year and a half. Anyone want to hazard how many rounds I've managed to find? The answer: 0

So they got workers back? Not just working from home? Wish Hornady made this ammunition still! I hardly see this ammunition

Plus by new many have seen the 6.5 cm run out of gas on animals. The 6.5 prc is a modern 270 win. Lol.

Why all these new cartridges when you can’t get ammo??? Makes the old standbys look more attractive than ever 😀👍👍

Wish there was ATip at 144gr as 153gr never catches up at 1200 yards and out!

6 mm arc ?

Make more ammo!

Man, I hear dem prcs got magic powder. GOOD SHOOTIN.

Bought a 6.5 PRC, can't find brass or ammo. Sorry I bought it.

what about the 6mm PRC........

If you're worried about shooting a 130 at an elk, go with a bigger cartridge with a heavier bullet. Plain and simple. No different metal is going to put your mind at ease if you don't like the bullet weight

In general, costs and availability are the reasons that I haven't bought a gun, primers, bullets, brass..... since 2020. Whenever that all changes for the better, one of my first purchases will be a 6.5 PRC. Another recent "newbie" cartridges will be a 360 Buckhammer rifle (s) and cartridge. This 6.5 PRC is really the only 6.5 cartridge that really caught my attention of late. The Creedmore never did because it was just a reinvention of the wheel.... the 260 Remington. Now, what's wrong with pushing the 7mm PRC's shoulder back about about a 1/4", leaving a slightly longer neck, and sizing it down to 6.5mm? It would be a more modern 264 Winchester magnum, in a long action. It would have the "magic chamber throating" of your PRC cartridges, quick twist rifling, the longer neck to make it adaptable to ALL bullet lengths... but with the larger capacity for (maybe) higher velocity than the 6.5 PRC.

They had to of looked at the 6.5-284 and though that's just about right for what we need. The 6.5-284 is essentially the exact same thing.

How come you can"t make a round like

Why not a 150-159gr bullet? Why just a 143gr bullet? Please reconsider making a change to a higher weight for next bullet

🤔 Since I shoot a 270 Winchester in your 130 grain CX, which replaced your 130 grain GMX, WHY does it have a "Significantly Lower Ballistics Coefficient" - when all you did was add the heat shield tip to it? 🤷‍♂️

I payed $53 dollar a box off 20 that’s crazy expensive