Hornby P2 HM7000 Fit | Review | Model Railway Run & Cab View

Hornby P2 HM7000 Fit | Review | Model Railway Run & Cab View | ml31

Рет қаралды 2,370

Күн бұрын

Starring Ex-Broadcaster Spencer J.Bell Fray. Keeping Our Amazing Hobby Positive, Fun, Independent, Creative & Unaffiliated.
Thank You To All Who Now Kindly Support Modeloco. Link Below
buymeacoffee Donation Link - www.buymeacoffee.com/modeloco
You can now support the channel by purchasing the Remastered Modeloco intro track - Link - andymacc.bandcamp.com/track/c...
00:00 Review
03:49 Weigh In
07:37 Fitting Figures & 21 Pin Decoder
18:07 Final Checks & HM|DCC Link
25:31 Lofthouse Run

Пікірлер: 34

@wamgoc 3 ай бұрын

Great video!! I’m with you about Hornby! I think they are doing a fantastic job atm. HM 7000 is looking really good and the TXS decoders are really good!! 👏👏👏

@modeloco 3 ай бұрын

They are and once embraced, it’s so much easier 👍

@Haymarket47 3 ай бұрын

Rapidly becoming my favourite KZfaqr. Love your enthusiasm and informative videos. Better than the naysayers and carpet enthusiast!

@modeloco 3 ай бұрын

Thank you 🙏 Ironically, the very ingredient’s that gave me the nudge to begin. It makes me so happy, it’s great to serve and a pleasure to know that others really do feel it too 👍💫🐣❤️🤩😃

@MrLoewietje 3 ай бұрын

Thank you for your clear and informative videos! I enjoyed this one, even if I already did the very same procedure with my Thane of Fife. I look forward to watch your Legacy Dongle videos, if I can spare an hour or so! Good to see such quality content between all the flashing opiniated clickbait.

@modeloco 3 ай бұрын

Thank you 🙏. I very much appreciate your comments and really look forward to any more comments you add. The Thane Of Fife is a beautiful model 👍

@StevenTT120Layout 3 ай бұрын

Good job Andy. See you on the next one.👍

@modeloco 3 ай бұрын

Thank you Steven, Might be back on the TT front soon. Loving both at present and then there’s the control side. It’s all happening 👍

@kitchenhamfarm 3 ай бұрын

great video if you go back to 30 minutes 15 seconds you seamed to have modelled a flying bird in oo scale well done for that

@modeloco 3 ай бұрын

Thank you! Yes, Spencer J. certainly missed that one! 😂

@phil36310 3 ай бұрын

Hi Andy, Thank you for another positive and most pleasant to watch review on this 'superb' Hornby steam locomotive. I would love one but it's so sad that the EU charges exorbitant taxes on UK items that makes it so expensive. Not to mention the transport companies charging extra cost on imported items. It's a crazy world of greed and interference of foolish gouvernements in all aspects of our lives. If 'leaders' would only play trains and enjoy this fine hobby !! Happy model railroading, Cheers, Filip

@modeloco 3 ай бұрын

Hi Filip, Good to hear from you again. Could I ask, if you bought from a company based in Ireland would these fees be still applied in the same way?

@phil36310 3 ай бұрын

@@modelocoAhha, Thanks for the tip Andy! I've never thought of this as a 'could be' solution. Just need to find a Model RW shop shipping to France. I Google a company and check it out. Thanks again and have a great weekend !

@modeloco 3 ай бұрын

@phil36310 It might be why it’s becoming very popular for the likes of Apple, Amazon and a certain model manufacturer

@modeloco 3 ай бұрын

What is concerning, apart from you being charged so much now and so, avoiding. Is that UK based companies with employees too, are again going to be hard pressed to be on a level playing field. I feel this will have been a major influence regarding Hattons, that Rails of Sheffield have now acquired in name only. Just like the railways, freight was taxed onto the roads and as I harp on about, all so well timed, then Dr. Beeching had a field day 😮

@phil36310 3 ай бұрын

@@modeloco It's the 'economic system' based on capitalism. Money matters more than people. Rails is no exception and sure Hattons stopping is butter and cream for them. "Ones death is another ones bread"

@terrier_productions 3 ай бұрын

I’m still new to Hornby’s HMDCC. I know that I can HMDCC chipped locos on Analogue because someone did that at my local club and because of that, I might re-chip my DCC locos but do I need a HM7000 if I am to get the chips?

@modeloco 3 ай бұрын

You need the free app to register decoders added. This protects that decoder from hacking. You also need it to download/set specific settings and sounds to the decoders, as they ship with just a basic steam sound profile. The Apple iPad is a marriage made in heaven, I find. Remember too the app allows you to now alter/read all CV settings on the fly, very simply indeed if the decoders are the new HM7000 ones and all this is done on the layout. No programming track needed 🙏👍

@terrier_productions 3 ай бұрын

@@modeloco ok thank you

@DevonGeorge85 3 ай бұрын

Hi. I've recently got the dongle but it's not compatible with my NCE powercab. I use 4 digit addresses for my DCC Loco's and am wondering if I will get away with buying a Hornby select controller and using the dongle on that. Will that work do you think knowing that the select only uses 2 digit addressing?

@modeloco 3 ай бұрын

Yes, Hornby state they will, as long as you readdress your locos into something that the select recognises first. If you can call up and run locos on the select, the dongle will see them and then you can copy them over into the app. My earlier two shows on the dongle may help a bit too 👍

@modeloco 3 ай бұрын

Plus a good watch before buying as an elite may serve you better