No video
Hot Toys BTTF2 DeLorean PROBLEMS | Watch before you buy!
Рет қаралды 12,310
Күн бұрынWe invite more feedback on the Hot Toys Mark 2 DeLorean Back to the Future Time Machine! If you have any issues with yours, same or different as the ones we presented here, please let us know down in the comments. Thanks!
Check out our ULTIMATE Review and Unboxing video of the Mark 2 Hot Toys DeLorean here: • ULTIMATE 1/6 Scale Hot...
#delorean #backtothefuture #hottoys Disclaimer:
Due to factors beyond the control of DeLoreanTECH, we cannot guarantee against improper use or unauthorized modifications of this information. DeLoreanTECH assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. DeLoreanTECH recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of DeLoreanTECH, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not DeLoreanTECH.
@2NDCBT Жыл бұрын
Great video. Thank you for the video, but the 1st issue is really a non-issue to me. The Delorean MK2 is exactly the same as the first with only the hover mode and Mr. Fusion. Just as it is in the Movie. It's virtually the same car! The silver over spray on the bottom and tires kind of sucks. I would definitely have a problem with that! Mine comes in on Tuesday. We'll see when it comes in if it's the same. Thanks again for posting.
@DeLoreanTECH Жыл бұрын
The good thing is they did correct the fascia color. That was a major issue for me with Mark 1.
@dannylatarte2650 Жыл бұрын
Exactly my man foul complaint
@Glitch969 6 ай бұрын
Yeah, that was a pretty lame complaint. I have both and the fact that they added so much more illumination to the interior make this version SO much better.
@MegaManXtoys Жыл бұрын
All of the reviews that I've seen for this vehicle have the paint speckling on the tires including "Sideshow's First Look" video. So it's meant to have that as a weathered effect look. As for the tires sticking out while in ground mode, you gotta make sure they're tucked in ALL THE WAY. Same goes for when you're turning them in for hover mode. You gotta make sure they're pulled out ALL THE WAY until you hear 2 clicks, then they won't rub up against the fenders.
@DeLoreanTECH Жыл бұрын
Thanks for the info. I am hearing differing things about the paint spatter but I went back to that Sideshow First Look video and studied it. It was barely noticeable but you are correct, the spatter exists on the tires there for sure. Not sure about the underbody because the lighting in the video hides it -- but one can deduce that this was intentional, and is some form of weathering -- albeit not pulled off very well...
@brandonm7815 Жыл бұрын
I like the weathered look, but I can see why people might not. It should’ve been something that was an add on or something people would mod. It isn’t visible in the promotional videos, but I found the rust on the exhaust odd since there were no signs of weathering elsewhere. I think the weathering will be cool. Still waiting on mine!
@invinoveritas9260 Жыл бұрын
For those that missed out on #1 the issues presented are very minor. My mark 2 does have the white specks on the tires. I am a bit nervous with the base so I chose to display it laying flat until I can find an alternative. The shipping box was a disappoint. They should have placed that inside another shipping box. Thanks for the video!
@DeLoreanTECH Жыл бұрын
You bet and thanks for watching
@chrisgentry6269 Жыл бұрын
I disagree. #1 is the biggest issue because Hot Toys had a chance to fix the inaccuracies of the Mark 1 but chose not to (with the exception of the bumper color but that was a must fix). Things like the tail lights and bumper logo are accurate on the Eaglemoss model, but STILL inaccurate on the Mark 2 and are a carbon copy of the Mark 1!
@jamescarr4845 Жыл бұрын
The speckling is dirt and mud the second movie starts in the rain the stuff on tires and bottom simulates mud and rain speckling on the tires and bottom of the car remember it’s suppose to be from the movie a replica of the car I am pretty pleased with the car personally
@DeLoreanDestiny Жыл бұрын
Looks like Adam Savage's Mark 2 model also has the speckling on the tires. No closeup shots of the underside so couldn't confirm that. If we're talking screen accuracy, the lights should not illuminate on top of the wheels in hover mode. They should have painted the other side black to block the light. It should only illuminate through the outer side of the wheels.
@DeLoreanTECH Жыл бұрын
Thanks for the info on Adam Savage's review. I still need to watch it. At least I am not alone! And yes the bleed through wheels is not screen accurate but check out my ULTAIMET revoiew unboxing video coming tonight! (Currently uploading 4K and taking forever). I explain why I am okay with the bleed through, once you see it you'll know what I mean, hard to explain in mere words...
@angelroman8827 Жыл бұрын
The bottom line is 900 dollars with that flaws is a pass for me also I saw post of ppl who already broke it dealing with it …
@DeLoreanTECH Жыл бұрын
It really is a roll of the dice (no pun intended). But I still love mine, issues and all. I guess it’s a bit of a love/hate relationship
@jgtdragon Жыл бұрын
I was trying to find your unboxing video, but not able to find it.
@DeLoreanTECH Жыл бұрын
It's been uploading this whole time and is currently "processing"...it's a long in-depth video in 4K so taking forever. Hopefully later tonight!
@DeLoreanTECH Жыл бұрын
My Unboxing video is now live. Sorry for the delay!
@2NDCBT Жыл бұрын
Just received my Delorean today. Not set up for making You tube videos yet, in the process of moving. In any case., Looks awesome but it did arrive with the passenger seat loose. Scuffed the windows inside a bit but I waxed the scuff marks out. Looks awesome! I did have some overspray on the tires. Hardly any overspray under the bottom and all the tires are bright when lit up. Very happy though.
@DeLoreanTECH Жыл бұрын
Thanks for reporting in!
@chriszimmerman4973 Жыл бұрын
I’m having a hard time buying the weathering reason for the overspray. Seems odd to think that someone would have had the idea “you know what this car’s missing? Speckles on the tires!” 😂 “For accuracy”
@DeLoreanTECH Жыл бұрын
EXACTLY...especially a company like Hot Toys who DO know how to apply proper weathering to their models!
@mharris3518 11 ай бұрын
Got no problem with the tire weathering or any issues with mine. It's an amazing piece for the money.
@DeLoreanTECH 11 ай бұрын
Glad you had no issues!
@8bitflea Жыл бұрын
They all have that “weathering” on the tires and underside mine has it as well. Mine came with a broken side mirror and paint touch up from the factory by the driver key hole. Also one of the front bumper clips broke even though I was being super careful. This car is very fragile. I still think it looks so awesome though.
@DeLoreanTECH Жыл бұрын
Thanks for confirming. I have now accepted that as fact and included it in my Mark 1 vs Mark 2 comparison here: kzfaq.info/get/bejne/g8-nhcmcyqy-eZ8.html
@ghostbusterspluscollector9624 Жыл бұрын
I agree about it being the same but honestly it’s the same car in both movies besides Mr Fusion and the wheels flipping down. I have the same silver paint speckles and also under the car. My only guess is maybe the were tying to weather it with dried rain spots??? No idea I don’t like it at all.
@DeLoreanTECH Жыл бұрын
Agreed- same EXACT car in all 3 movies, the A-Car and one of 7 used. However i was hoping for significant differences in the way of screen accuracy as opposed to the exact same model with modifications. Like maybe something completely re-engineered but I guess that’s asking for too much…
@JohnnyBorja86 Жыл бұрын
As far as I know, every unboxing video including the official one from Sideshow Collectibles shows the speckles on the tires and the undercarriage. As other collectors here on YT state, the speckles are meant to simulate dirt and grime to make it seem more realistic as a car. That makes sense, although I could see why it would bother some collectors who would've liked it to be clean. Not sure how it looks on the Mark 1 as I don't own that one.
@DeLoreanTECH Жыл бұрын
Thanks for further clarifying this. I feel better now knowing it's not a defect, but at the same time it simply doesn't look right. Going back to the movies, the BTTF 2 car didn't have a bunch of spatter all over the Goodyear tires. Speaking of which if Hot Toys wanted to give us movie accurate they should have given us the whitewall Goodyears instead of the non-screen accurate Mark 1 tires with spatter. Eaglemoss pulled that off so it shouldn't have been an issue for Hot Toys, which is a bigger company (and still exists!). As for the Mark 1 car, the tires and underbody are both clean. I'll do a side by side on both cars this week. Stay tuned!
@JohnnyBorja86 Жыл бұрын
@@DeLoreanTECH that’s a good point regarding the movie accuracy of the tires. Also, it seems wierd they would put dirt splatter on the mark 2 considering it’s the one that hovers but not on the mark 1 which is the one that actually drives on the roads. If it is a defect, that would be a major screw up on their part considering I’ve yet to see one without the paint splatter.
@TheChild888 Жыл бұрын
@@DeLoreanTECH I think on having "Goodyear Tire" brand marking on the tire wall is all based on paying licensing fees to just get it on there. Eaglemoss might have paid licensing to get the "Goodyear" branding on it(?) to make it screen accurate or how tire branding is for the tire used for DeLorean. If you ever own Hot Toys 1/6th scale figure of BTTF2 Marty, the Nike Mag/jacket carrying tube case like in the movie and the Nike Mag auto lacing sneaker doesn't have "Nike" & the swoosh branding on it so to avoid lawsuit and usage without paying licensing fees. Also same goes with Hot Toys BTTF1 Marty's Nike Bruin sneaker has no Nike swoosh too. Plus Spider-Man: Into the Spider-Verse Hot Toys release, the lookalike pair of Air Jordan 1 sneaker on Miles Morales figure doesn't have the swoosh either and to avoid copyright lawsuit/paying licensing fees to use. If Hot Toys can go all out and just pay the licensing fees, it will make everything they intend to make to be more screen/life like accurate, than just half done accuracy for half complete nostalgic sakes.
@DeLoreanTECH Жыл бұрын
@@TheChild888 Good points all around! I agree the price would be higher to facilitate the branding of Goodyear and Nike (not to mention Pepsi). Regarding the Goodyear Tires, that is perhaps why the Eaglemoss was so damned expensive!
@DeLoreanTECH Жыл бұрын
@@JohnnyBorja86 Agreed!
@Kal_El_Krypton Жыл бұрын
Just received mine and had no problems with any of the installations nor the tire inset issue. Maybe they got the feedback and made some adjustments. So yeah no probs here.
@DeLoreanTECH Жыл бұрын
Glad to hear! It’s possible that HT did some quality control and that’s why deliveries were delayed on recent shipments
@cpear760 Жыл бұрын
Is it me, or do the hood grooves seem too short at the front?
@DeLoreanTECH Жыл бұрын
Thanks for pointing that out. I will address that in my Mark 1 vs Mark 2 video...I assume they are the same but we'll see
@DeLoreanTECH Жыл бұрын
I checked and yes totally too short but this was also the case on the Mark 1 -- again, same exact model just tweaked the wheel design for hover mode and added Mr. Fusion, more LEDs and fixed fascia paint!
@ghostbusterspluscollector9624 Жыл бұрын
Apparently EVERYONE has those silver paint specs so I’m assuming it is indeed a very sorry attempt at weathering. It does not look like weathering at all looks like a defect no matter what they were going for.
@DeLoreanTECH Жыл бұрын
Yep i mean that was my first impression and you know what they say about first impressions
@marc-andremarcoraymond2242 11 ай бұрын
Yous should say 1ST issue - The figure ars too tall for the delorean,the seat are glued to the floor without pedals.... that shoud be a major issue IMO
@EctoPlasmic Жыл бұрын
the "white specks" is road dirt isn't it? Part of the weathering which makes it more realistic.
@xenokon9335 Жыл бұрын
Roads? Where we're going we don't need roads... so why would it be road dirt???
@JohnnyBorja86 Жыл бұрын
@@xenokon9335 Even though the vehicle could hover, it still had the capability to drive on roads as well. Although it probably spent much less time on the road, it could still be assumed there were instances were it was driven there as well
@DeLoreanTECH Жыл бұрын
@@JohnnyBorja86 Others are saying the spatter on the tires and underbody is a defect while some say it isn't. Waiting for Hot Toys to confirm!
@edwamser 6 ай бұрын
Tires are also missing the Goodyear Eagle GT lettering. Hot Wheels got that right on their Elite series.
@DeLoreanTECH 6 ай бұрын
Indeed, so did Eaglemoss, but Hot Toys didn't get the license to do that....
@outsider238 Жыл бұрын
The fact that this looks like the first car is what you'd expect. It's the same car!! Just like in the movie they just added the "future" modifications. The wheels have to be pulled out ALL the way. Even after the second "click" they come out even farther and that allows the tires to flip up properly. You have to pull them completely out. The speckles on the tires and underside of the car is weathering. It's done to make it look dirty. As for the tires sticking out, I'm guessing 99% of people buying this are going to display it in hover mode since that is the main appeal of this version over the original version.
@DeLoreanTECH Жыл бұрын
Thanks for reporting back in on the wheels. I feels like days later that rear wheel joint loosened up a bit. I didn’t want to force it but it felt like it was extended to the max. It doesn’t take much effort to break the wheel extension mechanism as poor Danoby found out in his unboxing.
@outsider238 Жыл бұрын
@@DeLoreanTECH Yes I saw his video. But he was being pretty rough with them so I'm not completely surprised that he broke his wheels. Plus he was pulling on parts and drilling into it before he even checked to see if everything worked. I think some people forget that these are models and even though it's made by Hot "Toys", it doesn't mean they can be treated as such. Oh well, I think most people that got this like it and I'm grateful I was able to get one.
@bruticusprime1536 Жыл бұрын
Great video -- much appreciated going over these issues before we plunk down our hard earned cash! I still want one but cannot afford it! More power to you guys who can.
@DeLoreanTECH Жыл бұрын
No problem and thanks for watching
@jedikat9881 Жыл бұрын
I was wondering where you got the display box your mark 1 DeLorean is in? I’m looking to get some dust protection for my DeLorean Mark 2….
@DeLoreanTECH Жыл бұрын
IDisplayIt here: kzfaq.info/get/bejne/kKp3f5aJ07_bh30.html but it will not fit the Mark 2 when in hovermode on the display stand. Better to wait for them to make one
@amorydesamores Жыл бұрын
Buen video, al parecer si tienes problemas con las luces de las llantas traseras y las luces de las turbinas, no se encienden bien.
@DeLoreanTECH Жыл бұрын
Estoy de acuerdo. Voy a notificar a Sideshow del problema. Incluso podría hacer un video al respecto.
@HappyDude1 Жыл бұрын
I checked adam's delorean video and it has non of your problems The lights are even in the wheels no dots on the tyres or the bottom And the bumper clicked in very easy 😀 i guess you have one made on monday 😂 but for that money it should starting sounds door sounds brake lights blinkers the buttons should work and more functions. Like the aston db5. My hot wheels super elite 1/18 video will come online soon 😀
@DeLoreanTECH Жыл бұрын
No weathering underneath or on tires for your Mark 2? Can you share some photos? This would be insane!!!
@HappyDude1 Жыл бұрын
@@DeLoreanTECH I have a hot wheels super elite The videos comes online tomorow
@dextertheragdollcat213 Жыл бұрын
I have the first one and I hated how the dash didn't light up. This one does as far as I know.
@DeLoreanTECH Жыл бұрын
It does! See my full unboxing video for close ups in the dark. kzfaq.info/get/bejne/ecxzjZR-xN2rXX0.html It looks amazing. Definitely one of the improvements I plan to highlight in my upcoming comparison video against the Mark 1
@ScubaDiverPicker Жыл бұрын
That’s DEF a defect. I watched other unboxings and nobody else has those specs like that on the tires and under carriage. I’d def return for another one.
@DeLoreanTECH Жыл бұрын
Thanks! I am hearing different things, like Adam Savage's review had them but I still have to watch that. I did comment directly to Hot Toys when they dropped their video featuring a spatter-free Mark 2 (tires and underbody). Hopefully they respond.
@DarkArynLand Жыл бұрын
I keep my mark 1 without regrets.
@DeLoreanTECH Жыл бұрын
Mark 1 is still a great model and i almost feel like prices will hold and go back up to where they were before they announced Mark 2 because of that greatness
@jessicasorl Жыл бұрын
I have fitment issues. Blotchy hood coloring.
@DeLoreanTECH Жыл бұрын
Sorry to hear…
@rotoscopic8757 Жыл бұрын
I keep asking why on earth for $899 would the replica not include the lights that really matter? The Flux Rails. You know, the front and rear rails which also wrap around over the top rear of the car. They glow bright blue when the car is about to break through time and space. They are lights that made the car so cool, and yet at $1,000, the flux rails do not replicate this critical feature. Why?
@DeLoreanTECH Жыл бұрын
That's basically my Issue #1 (gripe). It's a fancy re-issue of the Mark 1. Do I still like it yes, but so many missed opportunities like the lit flux bands to set it apart. I suppose at the price point they wanted such stuff was not possible.
@gus_bz Жыл бұрын
My hot wheels bttf2 1/18 ultimate edition glows the blue light in the bumpers, and Coust much less.
@TheSuperPsychoKiller 11 ай бұрын
The speckled paint looks like an attempt to make the car look dirty like it’s been out on a big adventure. I hope the third car comes out more dirty like the Wild West.
@DeLoreanTECH 11 ай бұрын
same here!
@user-dk3up2nl1m 7 ай бұрын
Im thinking of buying this when sideshow re-stocks it! I Dont like the stand. It should be able to angled any direction
@DeLoreanTECH 7 ай бұрын
I don't like the stand either. Check out my display stand HACK video to change it: kzfaq.info/get/bejne/nrGCeJShsMXWZI0.html
@Anakin-dl6eb Жыл бұрын
Almost all issues are really no issues....
@Kal_El_Krypton Жыл бұрын
Gripe 1 is tough because yes it’s not to different if you have the mk1, but it does allow for those who missed out on the mk1 to get a Delorean for a reasonable price. The paint flecks on the tires and bottom seem to be intentional, being some “hover weathering”. The shipping box may be just an attempt and reducing waste which also saves them money. Probably a victim of “going more green”. Idk 🤷♂️
@DeLoreanTECH Жыл бұрын
Good point about the going more green. I hadn't thought of that but it seems plausible. For the Mark 1 most probably keep the art box stored in the shipper, from which you can only see the top of it when opened unless you pull the whole thing out. Hence why they made that inner art piece on top of the styrafoam for the Mark 2...
@samkim6535 Жыл бұрын
Just received mine today. All my tires are speckled with paint like yours.
@DeLoreanTECH Жыл бұрын
Thanks for confirming!
@1515cci Жыл бұрын
Your first point was the main reason why I decided against getting the Mark 2. It pretty much looked like the Mark 1 and I actually like the original better.
@DeLoreanTECH Жыл бұрын
I still like the original myself, but I sorta have to give it to the Mark 2 because the Part 2 car was my favorite. That said I am glad I have both.
@1515cci Жыл бұрын
@@DeLoreanTECH fair enough
@jediknight38 Жыл бұрын
I'm still getting it. Just as soon as I get $900 together.
@playingbysplace4006 11 ай бұрын
What bugs me most is that the manual implies that the power button has a physical 0/1/2 position, while it's just a clicker button
@DeLoreanTECH 10 ай бұрын
right -- it's a momentary switch. Needs to be a latching switch.
@lionheartdioramas7565 Жыл бұрын
Issue #1 is not really an issue. They're the same model indeed
@DeLoreanTECH Жыл бұрын
They could have fixed all of the inaccuracies though but they didn’t. For example the rear bumper logo and dark tail lights. Also could have went with the soft white headlight LEDs for more screen accuracy. Too many of the design flaws from Mark 1 carried over to the Mark 2. At least they fixed the fascias…
@scottbishop4435 3 ай бұрын
Think the paint splatter is there idea of weathering road grime after rain
@DeLoreanTECH 3 ай бұрын
Indeed! Poorly executed
@spaulagain Жыл бұрын
Why would it be a completely different model from the first? It's the same car with some minor changes between the movies. A really weird thing to say is an "issue"
@DeLoreanTECH Жыл бұрын
They used the same model with the same inaccuracies as the first. For example the dark tail lights and incorrect bumper logo. Same inaccurate hood design. And a lot more. All they fixed was the fascias. That’s what i meant. The Eaglemoss was more accurate in many regards. Hot Toys had a chance to give us more screen accuracy but instead just re-released the first model with the hovermode mod, more LEDs, and Mr Fusion. Was hoping for something more for $900+ If you have both models it literally is a copy+paste+a few mods+1 correction of the Mark 1
@xpectz 11 ай бұрын
On mine, both corners on the hood by the wipers does not sit flush....yours has the same issue. So I'm ok with it. Not too noticeable anyway.
@DeLoreanTECH 10 ай бұрын
it's like a real DeLorean in that regard!
@xpectz 10 ай бұрын
@@DeLoreanTECH really?
@HYBECTIVE Жыл бұрын
Personally I’d rather have the Mark 1 but I went with the Mark 2 since it’s obviously cheaper
@DeLoreanTECH Жыл бұрын
RIght. I am starting to suspect the prices for the Mark 1 will actually go back up given the imperfections on the Mark 2, it's higher availability, and the fact that the Mark 1 represents more of a "hero" version of the two models, whereas the Mark 2 is a "weathered" (and not very well done) version.
@louisfasanaro9069 8 ай бұрын
All the tires are made that way on older deloreans, mark 2.
@Mikess44 7 ай бұрын
Does the gap in the hood in front bother you?
@DeLoreanTECH 7 ай бұрын
You can actually push in down and shirnk the "gap"
@Mmanifesto22 Жыл бұрын
I just got mine last week and I automatically noticed the difference in brightness between your front and back wheels. That's a big difference in brightness compared to my order. I have slight paint speckle on the wheels, but a completely clean undercarriage. That overspray underneath is insane and I would definitely contact customer service.
@DeLoreanTECH Жыл бұрын
This is good to know...perhaps it was just mine and if I choose to return for a replacement the new one won't have it...
@Mmanifesto22 Жыл бұрын
@DeLoreanTECH hey after careful inspection again I do have to say there is some grit on the bottom, but barely noticeable. Tires are definitely less speckle and light on back tire seems ok. Had to correct myself about that bottom grit tho
@Don_Hector_73 Жыл бұрын
I think Hot Toys was just taking a shortcut trying to produce this ASAP considering that JAZZINK announced that they're going to make the BTTF 2 DeLorean. Got mine is coming in by Sideshow next month. I have the mark 1, So was looking forward to this but if Jazzink does make the mark 2 I'm sure they'll try not to make the same mistakes.
@DeLoreanTECH Жыл бұрын
I wasn’t aware of this so thanks for the info!
@memania- 5 ай бұрын
Perhaps you should watch the first film again. Both DeLoreans are exactly the same except for the parts added on the new model. What are you expecting a Lamborghini?
@ramigoodwin7647 10 ай бұрын
Do these go up in value in a few years?
@joshuaweiner1 Жыл бұрын
For the price of the model, do you feel the Flux bands should illuminate? The inability to turn on a light for the Flux Bands is absolutely the biggest holdout for me.
@DeLoreanTECH Жыл бұрын
Yes they should! Another missed opprtunity
@JustinMcFly1980 Жыл бұрын
Thanks for the video and tips HT should knw we expect better.
@DeLoreanTECH Жыл бұрын
You bet
@dannylatarte2650 Жыл бұрын
But it would be the same model. Doc didint buy more than one dolorean. I don't understand what you thinking ??
@DeLoreanTECH Жыл бұрын
They used the same model with the same inaccuracies as the first. For example the dark tail lights and incorrect bumper logo. Same inaccurate hood design. And a lot more. All they fixed was the fascias. That’s what i meant. The Eaglemoss was more accurate in many regards. Hot Toys had a chance to give us more accuracy but instead just re-released the first model with the hovermode mod and Mr Fusion. Was hoping for something more for $900+
@Paradigmfusion 9 ай бұрын
Id sitll be happy to have it. sadly its too rich for my blood :(
@andresbecerrafuentes5233 Жыл бұрын
Hello, I liked your video so you earned my like, I need help, how can I remove the mud (paint) from the tires and make them look new? HOT TOYS always makes mistakes and we collectors suffer from their mistakes!!
@DeLoreanTECH Жыл бұрын
I have not tried but I heard that acetone might work to get it off? Maybe try it on an inconspicuous area like on the backside of the tire instead of the front. I think the tires can also be removed from the wheel in case you want to keep the model safe from a mishap (I think in one of Danoby's videos he removed the tires to do his bleed-through/LED mod...
@andresbecerrafuentes5233 Жыл бұрын
@@DeLoreanTECH Thank you very much and greetings from Chile!! Take care!!
@phildynerphotography5049 Жыл бұрын
The front flux band I had to carve out a chunk so I can fit the pins without breaking them
@DeLoreanTECH 11 ай бұрын
sorry to hear! Yes they were a pain
@phildynerphotography5049 11 ай бұрын
@@DeLoreanTECH I used a small knife and it was just a few millimetres so it’s barely noticeable thank God.
@alucardxx142 Жыл бұрын
I just got mine and everything seems to be fine with mine, I don't really care that there is no box I actually like that there are like 2 big photos I can frame them and display them on my wall, if it was a photo on a box I would need more room for the box the photos are beautiful and a good idea, as far as the paint ot doesn't really bother me, I guess it's a bad attempt of weathering but I can live with it, u complain that it is the same as the first one, of course it is exactly the same with a few modification jut like in the movie,
@DeLoreanTECH Жыл бұрын
Thanks for checking in and glad you are enjoying your model!
@ryderswowlwlhwnqjqnhbhbybb3 Жыл бұрын
“its a copy and paste of the mark one” well yeah, thats kinda the whole point
@johnfairbrotherfigureschan1328 Жыл бұрын
Mine also has tge speckles on the bottom and the tyres it looks like weathering to me so looks like its been to 1955 and 1985 then 2015
@DeLoreanTECH Жыл бұрын
When Doc rolled up to Marty's at the end of Part 1 the car looked a bit weathered but the tires in Part 2 clearly showed the Goodyear Eagle white sidewall lettering and no "mud" or whatever they were going for. Even the underbody of my DeLorean with nearly 100,000 miles does not look like that!
@cre8ivenerd Жыл бұрын
This isn’t a “problem” per se, but I was disappointed to see the Flux Capacitor labels aren’t screen accurate. They look like they’re written in Arial but the real labels would have been from one of those old school label makers that pushed the characters into the plastic to make white letters. The labels on this look inaccurate and cheap.
@Pyke_ Жыл бұрын
Do you know if with a box of this size can I ship it using USPS Priority Mail International?
@DeLoreanTECH Жыл бұрын
It might be too big for USPS. I’d go with UPS
@rafaellinares6583 Ай бұрын
Those are no really problems. What do you expect? A flying Volswagen Bettle?
@DeLoreanTECH Ай бұрын
😂😂😂
@punkfloyd Жыл бұрын
Got one of the first batch from sideshow earlier this year and I just noticed that one of the green flight mode lights (front passenger undercarriage) is super dim and flickers sometimes. I know it wasn't like that out of the box. Everything except fitting the front flux band worked great. If anyone has a solution to wiring/lighting issues that'd be great thanks.
@DeLoreanTECH 11 ай бұрын
Sorry to hear!
@darth2darth Жыл бұрын
I've preordered mine, but I was told the release has been delayed to May-Aug 2023 because of QC issue. Anyone know if it's related to all issues mentioned in this video?
@DeLoreanTECH Жыл бұрын
I would say it has to be...
@dealwiddit5072 Жыл бұрын
Lucky me, no issues as described!!!
@DeLoreanTECH Жыл бұрын
VERY lucky!
@DerrickAliyas Жыл бұрын
Ah that dose not bode well if my model is damaged on arrival I’ll be expecting compensation that’s terrible the shipper is the box what were they thinking
@DeLoreanTECH Жыл бұрын
Yes it likely will be "damaged" to a degree. Mine had dented corners but no gouges in the cardboard. Also the mailing label is difficult to remove -- I recommend using a heat gun and peel it off that way! But keep the heat on low to start
@DerrickAliyas Жыл бұрын
@@DeLoreanTECH Thanks for the advice
@davidz2016 Жыл бұрын
I feel bad for Danobi two broken wheels .
@DeLoreanTECH Жыл бұрын
Totally. It was obvious the car had issues out of the box with the rolling resistance
@davidz2016 Жыл бұрын
@@DeLoreanTECH I'm am now on your page my left wheel light is completely out and I don't want to send it back aaarrr .
@hotrod3769 Жыл бұрын
I'm bummed about the shipper. Should have had a double box option to protect it. Gets beat up in transit.
@DeLoreanTECH Жыл бұрын
For sure. Mine had dented corners but was mostly "okay" for a shipper. I think after days of owning this my biggest gripe is now becoming the inconsistent brightness of the LEDs in the front and rear wheels. I wonder if using the USB cable for power would help...
@hotrod3769 Жыл бұрын
@DeLoreanTECH I saw the Star Wars Replicas channels unboxing. His seemed to be the same brightness all the way around. Maybe a wiring issue. Consider exchanging it. That would bother me too.
@I_O246 Жыл бұрын
So I hope everyone knows that, that speckle/dirt application under the car and on the tires is on purpose. The reason it to make the car look more weathered a bit. Especially under the car because no car underneath is clean.
@DeLoreanTECH Жыл бұрын
Thanks for clarifying! "Weather" we like it or not (pun intended) -- it is what it is, and is confirmed to not be a defect. I would prefer a "clean" model. If they were going to do weathering it should have been thought out and perhaps do a nice 10-foot weathering treatment on it to get the effect they were going for. It came out awful.
@JohnnyBorja86 Жыл бұрын
@@DeLoreanTECH I remember when photos came out showing the wheels in the wrong position in hover mode, people complained enough to where Hot Toys listened and corrected the issue. Had we known about the speckles on the wheels and undercarriage, I feel like enough people would’ve complained to have them remove those as well. I can already see collectors everywhere pointing the issue out in their unboxing videos.
@ghostbusterspluscollector9624 Жыл бұрын
That would be cool if it looked like weathering but it just looks alike a defect. Horrible weathering job
@JohnnyBorja86 Жыл бұрын
@@ghostbusterspluscollector9624 they were like “just throw some paint splatter on it, they won’t know the difference” 😂
@rustybronco Жыл бұрын
That's over spray everywhere.
@DeLoreanTECH Жыл бұрын
Indeed and it can’t be removed without damaging the finish
@pauhy5601 8 ай бұрын
Just being over pickyness on your part& nothing more? People who purchase something always find something complain,guanteed?.
@DeLoreanTECH 8 ай бұрын
For the price i paid I expected no issues. Sideshow agreed and sent me a new one
@did3d523 Жыл бұрын
look toy
@NinjaSquirrel30 Жыл бұрын
Hot Toys a shadow of their former selves More $ and less quality or accessories pathetic
@DeLoreanTECH Жыл бұрын
I still like the model but they did rush it. I am returning mine for a replacement!
Brother Cousin's Toy Reviews
Рет қаралды 4,7 М.