Hotpoint / Indesit / Creda Dryer Pump

  Рет қаралды 7,436

Washing Machine Tips and Help

Washing Machine Tips and Help

3 жыл бұрын

How to clean / Repair / Replace a Hotpoint - Creda - Indesit Condenser Dryer Pump

Пікірлер: 41
@washingmachinetipsandhelp4350
@washingmachinetipsandhelp4350 2 жыл бұрын
Please feel free to buy me a Beer if this video helped. You know us Irish and Beer 🍺🙂paypal.me/washingmachinetips?locale.x=en_US
@joeclarke624
@joeclarke624 7 ай бұрын
Thank you so much for this!? Solved my dryer whining and saved me money... and losing face!?
@washingmachinetipsandhelp4350
@washingmachinetipsandhelp4350 7 ай бұрын
Excellent Joe! Delighted it helped 👍🙂
@MaA-he9sj
@MaA-he9sj 2 жыл бұрын
Tumble dryer pump was making a horrible noise now after your video solved and the Mrs is happy as Larry so mate does it save me a fortune👍
@washingmachinetipsandhelp4350
@washingmachinetipsandhelp4350 2 жыл бұрын
Ah great mate! Got to keep the woman happy 😊- Hey May I ask you to subscribe if you would mind 😊
@ian_morg
@ian_morg 7 ай бұрын
Thank you for sharing this video!! Ours wasn’t collecting water in the container and was leaking on the floor and that little slot was blocked with lint. I cleaned it out and water came flooding into the tray. I also need a new float which we’d noticed it wasn’t shutting off when full too. Awesome 😍😎👍🏻
@washingmachinetipsandhelp4350
@washingmachinetipsandhelp4350 7 ай бұрын
Excellent Ian! Most people just throw them out. Always worth taking a look and repairing 🙂👍
@ian_morg
@ian_morg 7 ай бұрын
@@washingmachinetipsandhelp4350 I’ll always try and repair if I can. Thanks again.
@ian_morg
@ian_morg 7 ай бұрын
@@washingmachinetipsandhelp4350 pump seems to making a lot more noise now when running, may need a new one.
@ian_morg
@ian_morg 7 ай бұрын
Scrap that, may have just been the pump running without any water in the tray. Seems ok now.
@washingmachinetipsandhelp4350
@washingmachinetipsandhelp4350 7 ай бұрын
@@ian_morg excellent, All sorted ?
@usmanpatel7447
@usmanpatel7447 3 жыл бұрын
Thanks bro sorted
@washingmachinetipsandhelp4350
@washingmachinetipsandhelp4350 3 жыл бұрын
No problem, Please sub if you don’t mind 👍
@richardhill9473
@richardhill9473 24 күн бұрын
Hi, watched a few of your videos and they have been very helpful, Thank You! I have a Hotpoint FTCF 87 condenser dryer. No water was going up into the tray / draw so i ordered a pump, but when i removed the old one the plastic blade that spins in pump was actually ok. i fitted the new one anyway, cleaned out the tray at bottom, the slot you mention with a cable tie etc. When i run the machine you can hear the pump suck all the water up, but then just after you stop it, it sounds like all the water comes straight back down into tray under the pump again and its not staying / collecting in the draw. Any ideas how to fix ? Thanks
@richardhill9473
@richardhill9473 24 күн бұрын
Cancel that, think original reason for tray not filling was clogged pump. Then when i relocated tumble dryer after i connected clear and black hoses at top the wrong way round 😞, water is now filling tray and staying there after swapping the hoses at top 🙂
@washingmachinetipsandhelp4350
@washingmachinetipsandhelp4350 24 күн бұрын
@richardhill9473 ah that’s great… I was going to suggest checking the hoses and blowing through them also in case something was stuck preventing the water from going up. Really glad you got sorted man 👍👌
@adamleeaustin1
@adamleeaustin1 3 жыл бұрын
Cheers mate sorted
@washingmachinetipsandhelp4350
@washingmachinetipsandhelp4350 3 жыл бұрын
No worries Adam 👍 Please don’t forget to sub ☺️
@andyburn2177
@andyburn2177 4 ай бұрын
Hi there, my condenser pump is marking a horrible noise. I have checked the float and that pops up and down fine. The noise seems to be the little propeller? Any clues how to solve the issue? Do I need to replace the pump? Thank you
@washingmachinetipsandhelp4350
@washingmachinetipsandhelp4350 4 ай бұрын
Hey Andy, I am sorry for the delay on replying. Yea replacing the pump is really the only way I find of solving this issue. You can buy the pump separate from the rest of the unit. Hope this helps
@blackhurst98
@blackhurst98 3 жыл бұрын
Hi is it normal to get a small leak at the bottom of the black tube and the water to seep back into the tray thanks
@washingmachinetipsandhelp4350
@washingmachinetipsandhelp4350 3 жыл бұрын
Hi There. When you say seep back into the tray do you mean the pump housing? It is normal for some water to be in the pump housing all the time. If it is leaking out of the housing where the black hose goes into you will have an issue
@blackhurst98
@blackhurst98 3 жыл бұрын
@@washingmachinetipsandhelp4350 thanks it’s a brand new machine pump sounded noisy when 1st used was nocking but it’s stopped now and that’s how I noticed the tiny leak where the black hose connects to it when the tiny puddle around the black was is big enough it goes back into the container can’t see any on the floor
@washingmachinetipsandhelp4350
@washingmachinetipsandhelp4350 3 жыл бұрын
@@blackhurst98 That sounds ok to me. ☺️ They are a very Good dryer. The most important thing is to keep the fluff filter clean (after every cycle of possible) And most Important of all is keep the Condenser box clean ( bottom left )as you look at the Machine behind the white cover. Be sure to clean this at least once a month. I can’t stress this enough to people. When these get blocked up they cause all sorts of problems. 👍
@blackhurst98
@blackhurst98 3 жыл бұрын
@@washingmachinetipsandhelp4350 great thank you for the advice
@washingmachinetipsandhelp4350
@washingmachinetipsandhelp4350 3 жыл бұрын
@@blackhurst98 no problem at all 👍
@robbiejess7483
@robbiejess7483 3 жыл бұрын
The impeller was broken, got a new part but when reassembled there’s no power to dryer. Can you post a picture of the wiring in the pump unit? School boy error, forgot to take a photo before disconnecting!
@washingmachinetipsandhelp4350
@washingmachinetipsandhelp4350 3 жыл бұрын
Going to the the float switch, The double wire goes on top, The black wire next, and the remaining wire at the bottom. The two wires going to the pump it does not matter what way they go on. To be honest there should still be power going to the dryer though
@robbiejess7483
@robbiejess7483 3 жыл бұрын
@@washingmachinetipsandhelp4350 fantastic, thank you, you’re right, dryer in the garage on a separate circuit and the trip had gone. Wires all correct and dryer working fine with 4quid part!
@washingmachinetipsandhelp4350
@washingmachinetipsandhelp4350 3 жыл бұрын
@@robbiejess7483 excellent news Robbie, Glad you are sorted. Please Don’t forget to Sub (If you don’t mind) 🙂
@usmanpatel7447
@usmanpatel7447 3 жыл бұрын
Hi mate is light back again i don't know why please let me know what to do thanks
@washingmachinetipsandhelp4350
@washingmachinetipsandhelp4350 3 жыл бұрын
Hi, Maybe take a look at this, This may be the problem
@washingmachinetipsandhelp4350
@washingmachinetipsandhelp4350 3 жыл бұрын
kzfaq.info/get/bejne/obuGZcKBuqmrpY0.html
MEU IRMÃO FICOU FAMOSO
00:52
Matheus Kriwat
Рет қаралды 44 МЛН
Неприятная Встреча На Мосту - Полярная звезда #shorts
00:59
Полярная звезда - Kuzey Yıldızı
Рет қаралды 7 МЛН
Looks realistic #tiktok
00:22
Анастасия Тарасова
Рет қаралды 6 МЛН
How to Replace the Drain Pump on a Hoover Tumble Dryer
19:16
eSpares
Рет қаралды 4,5 М.
How To Change The Heating Element On A Hotpoint Or Indesit Tumble Dryer
10:01
How to Replace a Condenser Tumble Dryer Belt in Hotpoint, Indesit or Creda
30:07
hotpoint dryer empty water light on, fix or repair
3:16
Camran
Рет қаралды 23 М.
Hotpoint / Indesit Dryer Not collecting Water
6:03
Washing Machine Tips and Help
Рет қаралды 22 М.
INDESIT IDC 8T3 Tumble Dryer - Drive Belt Change
13:03
Bennies Britain
Рет қаралды 113 М.