How and When to Replace Yoyo Response Pads
Рет қаралды 73,044
7 жыл бұрынLearn when to change your response pads, and how to replace them properly for maintaining responsive and unresponsive yoyos. yoyotricks.com/
Get new response pads for your yoyo here: yoyotricks.com/shop/cat/yoyo-...
@yotricks 5 жыл бұрын
Get your yoyo response pads here: yoyotricks.com/shop/cat/yoyo-store/yoyo-mods-maintenance/brake-pads/
@jaredlangson3038 3 жыл бұрын
3:34 is where changing the pad begins.
@Scott32297 7 жыл бұрын
I've learned so much about yo-yos just by watching all of about two of your guys' videos! I've had the same Yomega Dash for, I don't know, 8 years or so. I've never lubed it (did that today, thanks trumpet valve oil from middle school!), or any kind of maintenance outside of new string. I legit wait until the string snaps to replace it; have a few nicks on my yo-yo because of that. You should make a video on when you should replace your string by the way. I'm pretty casual though. I just pick up yo-yoing for awhile until I can't learn anymore tricks. I always come back though.
@vision821k4 Жыл бұрын
@R3dtooth7 feels sticky? bro do you like eat candy and yoyo? my strings are NEVER sticky boy
@vision821k4 Жыл бұрын
@R3dtooth7 how about grimy? grimy AND damp! what is your favorite yoyo?
@vision821k4 Жыл бұрын
@R3dtooth7 i dont own a silenus, but topyo in general, is one of the most under-rated best yoyo companies with actually fair* pricing. the silenus is dope bro, i def. have checked that yoyo out, i wish i had it. the mojo, for 13 bucks outplays all my other plastics and i have about 30. im glad to hear that, i really am. topyo and iyoyo are top contenders!
@andrewdimartino7426 7 жыл бұрын
I was just thinking i could use a video that goes more in depth on this, its like they read my mind!
@LewysC 7 жыл бұрын
My Sage is coming about next week!! can't wait
@psharmacgk 7 жыл бұрын
That's awesome! I've been working with my Sage for a few months now and I have to say, you're in for a great time.
@LewysC 7 жыл бұрын
Have you got it??
@LewysC 7 жыл бұрын
P Sharma I hope so too! all the string tricks are going to be so much easier XD
@failedabortion2187 7 жыл бұрын
You guys are new to yoyo that's cool good luck on learning tricks with that
@LewysC 7 жыл бұрын
IDK WHAT SHOULD BE MY UTUBE ACC NAME Thanks!
@Henry_Martin Жыл бұрын
I have a problem where my unresponsive yo-yo is responding to binds a little too well so it is becoming responsive. I lubed the bearing and it didn't seem to work. Please help
@smartnothard2400 18 күн бұрын
That’s what brought me to this video! My response pads are just below the rim of where they sit so I think the string rubs against the body of the yo-yo and the friction causes it to bind a little to ambitiously. It’s worth adding that I have never worn response pads out enough to where they need changing. This has only happened to a Dove and a Peregrine, both of which I bought used from a professional yo-yo player. I don’t think most players have the ability to even wear response pads out! An inexpensive fix either way ❤
@Lux_Resort 7 жыл бұрын
Nice timing 👍🏻
@raien8006 7 жыл бұрын
Nice Video!
@torasin13 7 жыл бұрын
Perfect timing guys... I'm a fairly new thrower and it was something I've been wondering for a few days. I'm having the odd problem though that sometimes my flairy binds aren't engaging and sometimes they are... I'm sure the technique is the same because it's the first thing I check. The string starts to bind... you can hear and feel it but the yoyo never starts the wind up. I've had the problem with a few of my yoyo's but it should be pads because they're pretty fresh... Same with string... could it be about spin speed?
@alexmyx5190 7 жыл бұрын
It could be not spinning fast enough, something to do with the pads, or most likely you are dropping the string to fast. When I was first learning the same thing happened to me. Make sure you lower the string and don't drop it until it has grip on the response pads. If that still doesn't work let me know.
@jaden7323 7 жыл бұрын
AngryRasin maybe not enough string got into the gap to make the yoyo bind
@torasin13 7 жыл бұрын
Thanks... A normal bind will work it's just the flair binds... so I'll keep an eye on the string... might be the spin speed too. Thanks for the pointers.
@torasin13 7 жыл бұрын
Thanks mate will pay attention to that and see.
@torasin13 7 жыл бұрын
Worked it out... turns out it's the string... once it get a bit worn it won't bind properly anymore... never had the problem previously and could basically use a string until it was dead but now that I'm adding flair in once it's wearing a bit it stops binding... going to swap to kitty string fat or slackies and see if that helps.
@refriedgoober7523 7 жыл бұрын
Do you guys still offer the mint-green Canon? I've been considering getting into 3A, and I like the brightness of that particular Canon, but can't find it on your website.
@yotricks 7 жыл бұрын
We should have those back in stock soon.
@HilltreesHarmony 4 жыл бұрын
What should I do if my unresponsive yoyo (Winter solstice) is starting to respond when being pulled up? I've only had it for a week or 2 and I can't get my grinds going because whenever I pull it up to my hand to grind, the string just begins to wind up the yoyo/snag without me doing a bind. This only starting happening about 5 days ago and It's really frustrating and I've tried switching strings and cleaning/lubing my bearing but it just made it worse. It's too responsive is my point. All the videos I could find talk about a yoyo not responding well enough but I can't seem to figure out how to stop it from snagging/responding. HELP!
@randomkidwholikedthisonech3964 3 жыл бұрын
How are you cleaning it? Also considering this is happening I recommend just replacing it
@headcrab4 7 жыл бұрын
Lol, you post this the day after I already changed mine, apparently needlessly :P
@wengkelvin1076 9 ай бұрын
What response pad do yoyo JIANKUN use tell me pleace
@Noah6544 6 жыл бұрын
I put on new response pads and my unresponsive yoyo is now responsive (only when I get a very strong throw and give it all the slack of the string, and when I'm doing finger spins, sometimes). I don't know What's wrong or if I missed something in the video.
@yotricks 6 жыл бұрын
Changing response pads will not cause this to happen. Most likely the bearing is just a tiny bit responsive. Have you ever lubed it? Also, try changing the string.
@silentassassin2272 2 жыл бұрын
I literally use a guitar pick to pick out the adhesive, and it worked great
@yotricks 2 жыл бұрын
I'll have to give that a try.
@edithcedillos4219 Жыл бұрын
Ok if it helps the yo yo come back then why does my yo yo sometimes not come back up to my hand when I bind
@manny2418 7 жыл бұрын
is ok if I use 100% silicone for my response pads instead of buying them ?
@kiancabarle123 5 жыл бұрын
You can do it on old yoyos because they have deeper groove for pads but on new yoyos they have a shallower groove which makes the silicone fall out easily
@shadowwolf_01 7 жыл бұрын
Hey yotricks! So I was wondering, just for curiosity sake, (and just in case I get the yoyo, which odds are I won't, but who knows) will you guys be getting any new colors/ getting back the green canon yoyo in stock any time soon, if at all? Also, will any new colors be coming to the freehand pro anytime soon, if at all? By the way, I am talking about you guys' site, and speaking of your site, I noticed you guys did a video about the King's Yomen a while back. Are you guys still doing that? Anyways, thank you for any answer you give, and God bless you guys, your site, and anything/anybody else you guys come into contact with! Thanks, Derp. :)
@alexmyx5190 7 жыл бұрын
There are a bunch of recent colors for the Freehand Pro on Duncan's website and on Amazon.
@yotricks 7 жыл бұрын
We are going to be getting new Canon colors in soon (including the Mint color), maybe as early as tomorrow if Fedex tracking is accurate. I cannot say about the Freehand Pro. We are still doing The King's Yomen, we had two shows this week ;) Thanks for the encouragement. Perhaps we will meet at a yoyo contest at some point!
@shadowwolf_01 7 жыл бұрын
Perhaps! Thank you! You guys are great at what you do! God bless!
@meteor7500 7 жыл бұрын
I realize that the sage yoyo isn't a metal yoyo so it I'm pretty sure its limited in what it can do 1a yoyo style wise (compared to a metal one). Is there a list of video 1a videos and overall tricks the sage can do?
@yotricks 7 жыл бұрын
+1124Meteor The Sage can do most any trick besides advanced grind tricks.
@meteor7500 7 жыл бұрын
Oh, thats great! I just assumed that since some of the 1a yoyo tricks I've seen are pretty long and require a long spin time. thx
@yotricks 7 жыл бұрын
The Sage can spin for several minutes when it is fitted with the unresponsive bearing from the pro pack, as long as you have a straight and powerful throw.
@Tequilabeats03 6 жыл бұрын
Does 100% silicone work? , and also if I buy response pads for my yoyo will every size fit? I have a replay pro.
@yotricks 6 жыл бұрын
On all of our product pages we have a recommendation section that tells you what pads fit into the yoyo. yoyotricks.com/shop/yoyo-store/yoyo-brands/yoyofactory/replay-pro-yoyo/
@yotricks 6 жыл бұрын
Flowable silicone works best.
@jonathanfun5120 7 жыл бұрын
response pads are great and all, but what are your thoughts on flowable silicon response?
@yotricks 7 жыл бұрын
In my experience it peels out of most yoyos too quickly.
@kiancabarle123 7 жыл бұрын
yotricks can i use rtv silicone to make response pads?
@jonathanfun5120 7 жыл бұрын
I used gasket maker from my local auto store
@Henry_Martin Жыл бұрын
@@yotricks I have a problem where my unresponsive yo-yo is responding to binds a little too well so it is becoming responsive. I lubed the bearing and it didn't seem to work. Please help.
@coolness509010 7 жыл бұрын
Ty i just got a replay with 2 more sets of response pads :D
@yotricks 7 жыл бұрын
Awesome!
@coolness509010 7 жыл бұрын
BTW i really like your replay!!! i wanted translucent orange but i got the Ann Connolly edition.... still great tho :DD
@liloc1313 7 жыл бұрын
yotricks do you ever do give away s
@Pertamax7-HD 3 жыл бұрын
Super yoyo
@Krix08 7 жыл бұрын
here before this comes viral :)
@Xenon1825 7 жыл бұрын
KF Gameplays It's a yoyo video. Ya silly goose.
@occajones5685 4 жыл бұрын
My responsive yoyo is brand new but still isn't responsive a lot of the time, any idea on how to fix this?
@randomkidwholikedthisonech3964 3 жыл бұрын
Occa Jones change string or lube it with thick lube
@jimxag5999 4 жыл бұрын
can I wash a size a bearing in rubbing alcohol?
@yotricks 4 жыл бұрын
Alcohol is diluted with water, so it may cause your bearing to rust.
@FlyingpigPlaysMC123 7 жыл бұрын
Hey, i have recently bought a Sweets Kendamas Prime Solid Blue Kendama, and after 5 minutes of play after recieving the Kendama, my grip got really sliperry, and i cant get it on Lighthouse anymore, i cant even put it on with my hand! What happend?!?
@yotricks 7 жыл бұрын
Have you asked Sweets?
@FlyingpigPlaysMC123 7 жыл бұрын
Dont worry, i got used to it and im landing Lighthouses all the time
@yotricks 7 жыл бұрын
Great!
@Tequilabeats03 6 жыл бұрын
How does it take to wear out pads? AGHH, SO MANY QUESTIONS
@yotricks 6 жыл бұрын
It all depends on how often you yoyo. It could be as little as 4 weeks, it could be over a year.
@remoengels2085 3 жыл бұрын
i love slippy loese binds :D
@mdn8r56 2 жыл бұрын
If I want to make an unresponsive yoyo a responsive one can the pads do that?
@yotricks 2 жыл бұрын
No. It is more about the bearing than the response pads.
@mdn8r56 2 жыл бұрын
@@yotricks Ok, thank you so much!
@dons1053 5 жыл бұрын
Do response pads take time to break in and if they do how long do they need?
@yotricks 5 жыл бұрын
They do not. They should work great immediately.
@waylenbeare1020 5 жыл бұрын
I mean they can be a little snappy at first and more responsive than they will later if you keep using them
@lanceloqui2153 7 жыл бұрын
Whats the size of a yyf shutter???
@yotricks 7 жыл бұрын
It uses standard 19mm response pads. yoyotricks.com/shop/yoyo-store/yoyo-brands/yoyofactory/yyf-slim-pads-blue/
@jamesb1347 7 жыл бұрын
Would you guys reccomend the dv888
@Lux_Resort 7 жыл бұрын
Jacksepticy The champ i would
@failedabortion2187 7 жыл бұрын
For beginners yes and no the good part about it is because it small and you can catch it easily the bad part about it is you could ding the yoyo and scratch it
@enzogamer6556 7 жыл бұрын
Hey, yotricks! I'm back. Can you tell me why when I do "Walk The Dog" it won't come back? :|
@yotricks 7 жыл бұрын
Most likely the spin is dying as you do the trick. You probably just need to pull the yoyo up sooner, or throw it harder.
@enzogamer6556 7 жыл бұрын
yotricks ok! thanks for the tip! sorry if my comments waste time :(
@gabrielbalaj7410 7 жыл бұрын
I LIKE Kendama tricks
@BEARILLAvideos 7 жыл бұрын
I've had the space cowboy for about two years, and the response pads keep expanding and pop out! I've done deep cleaning and don't use lube. Even gone as far as buying a new bearing but it still happens. =[
@yotricks 7 жыл бұрын
The reason that is happening is because you are getting yoyo lube on the response pads, we recommend removing the bearing from the yoyo before you lube it so theres no risk of getting lube on the response pads :)
@dylantuohy4531 6 жыл бұрын
Are you lubing the bearing in the yoyo or do you take it out because if you lube the bearing with it in the yoyo then it could react to the pads and make them expand.
@yago8672 5 жыл бұрын
Nice nails! keep it clean
@matejhizel8974 3 жыл бұрын
i just bought new pads 19mm but when they are on the yoyo they are too ,,tall,, i mean they are taller than the circle what they are in and it does not fit in it perfectly, any help?
@yotricks 3 жыл бұрын
What kind of yoyo is it?
@matejhizel8974 3 жыл бұрын
@@yotricks shutter wide angle which uses the 19mm pads
@yotricks 3 жыл бұрын
That is pretty odd. Sometimes the pads do need to be forced in, but usually they are not too tall. What kind of pads did you get?
@matejhizel8974 3 жыл бұрын
@@yotricks slusny.net/shop-cz/yyf-pad-thin/ here is the link but its in my language
@yotricks 3 жыл бұрын
Those are made by YoYoFactory. They should fit. I would ask Slusny to send you another pair, I guess.
@Peter-iu6uw 7 жыл бұрын
Can you review the IR Pads
@yotricks 7 жыл бұрын
We currently have no plans to carry IR Pads, but if we decide to stock them, we will consider doing a review.
@Peter-iu6uw 7 жыл бұрын
yotricks are they good ? Some people say it snags a lot and others say it is the best . What are your opinion
@yotricks 7 жыл бұрын
They seem to be a more grippy response pads. That is why some people call them snaggy, and others like them, because they bind tight. If you are frustrated by your yoyos because you feel that they do not bind tight enough, then they might be worth trying.
@veljkopetrovic6002 7 жыл бұрын
thanks
@roebro.44 7 жыл бұрын
yotricks can i get an autograph the next time i buy something from your site :D?
@roebro.44 7 жыл бұрын
Quin Taylor like a peice of paper with a famous signature xD? autograph?
@yotricks 7 жыл бұрын
When you order you can leave a message in the Customer Notes section and ask for one.
@roebro.44 7 жыл бұрын
yotricks really? Wow thanks :D
@genatolim9215 4 жыл бұрын
How to know the size of the yoyo pads?? Plss mee
@mollies13 3 жыл бұрын
quality
@danielang8180 7 жыл бұрын
Those dings tho
@XXxdjangox 7 жыл бұрын
will yotricks sell blueprint string?
@diorsawaaj 7 жыл бұрын
Yeasty Chain HighEndString is very similar, and lasts a little longer too
@nictheperson6709 7 жыл бұрын
Yeasty Chain Werrd isn't making it Bryan Perez It's also much more expensive.
@harveymoras1481 7 жыл бұрын
yotricks pls help me can i use yoyo factory boss for 5A
@yotricks 7 жыл бұрын
It is not the first yoyo we would recommend for 5a, but if that is what you have it will be enough to get you started.
@harveymoras1481 7 жыл бұрын
thank you yotricks
@theolodger 5 жыл бұрын
Will Replay turn unresponsive with slim pads?
@yotricks 5 жыл бұрын
You also need a wide bearing.
@theolodger 5 жыл бұрын
@@yotricks I see... What will happen with only slim pads?
@theolodger 5 жыл бұрын
Semi-responsive?
@yotricks 5 жыл бұрын
@@theolodger Indeed.
@theolodger 5 жыл бұрын
How does semi-responsiveness work?
@itsthatwally9648 6 жыл бұрын
when i got my cv888 the pad was already out
@yotricks 6 жыл бұрын
If you got it through us contact us with your order number and we will help you out. yoyotricks.com/contact/
@Nick-yl4je 7 жыл бұрын
I have a onestar aka upgraded sage and it only spins for twenty seconds with a good bearing -help
@yotricks 7 жыл бұрын
Do you have other yoyos that sleep longer?
@Nick-yl4je 7 жыл бұрын
yes my shutter and GM
@Nick-yl4je 7 жыл бұрын
I can make my shutter spin for 5 min
@Nick-yl4je 7 жыл бұрын
Thanks! I will
@Tequilabeats03 6 жыл бұрын
Can I make a response pad from hot glue?
@yotricks 6 жыл бұрын
No, it will not be responsive enough. If you want to make your own response pads you should use silicone.
@alaintio8155 7 жыл бұрын
Is the silver one a Canon?
@yotricks 7 жыл бұрын
Yes.
@alaintio8155 7 жыл бұрын
oh another thing.. can oil be the lube?
@Thr3leven 7 жыл бұрын
Not safely, you might damage the bearing. Go check out their video on lubing yoyos.
@alaintio8155 7 жыл бұрын
ok2 thanks though!
@jimxag5999 4 жыл бұрын
can i lube a size a bearing with wd40?
@yotricks 4 жыл бұрын
WD-40 is a degreaser, which means it is designed to remove lube, not to act as a proper lubricant. It is not a good idea to lube your bearing with WD-40.
@isaacreynolds9898 4 жыл бұрын
If u want to make ur own u can use 3 parts paint thinner to one part 3in1 oil for a nice thin lube.
@mollies13 3 жыл бұрын
Never ever lube your bearing wd40 cause I did that once too with yomega Yo mod green yoyo. If kind of F up my bearing it slep the same just performance isn't good anymore. WD40 is oil lube. Just buy thin or thick lube by real yoyo company, they only cost $5 or $9 OH yea the right what happen is also can hurt your pad if you dont dry your bearing even if it dry it still gonna wear your pad to quick. That why I couldn't play my protostar anymore cause of that wd40
@muhammadamsyar1939 7 жыл бұрын
just when mine peels out
@nintendoplayer2016 5 жыл бұрын
My responsive pad did came out
@t4dollaz 6 жыл бұрын
I put lube on my unresponsive yoyo and now it's responsive how do I fix it
@yotricks 6 жыл бұрын
What kind of lube did you use?
@t4dollaz 6 жыл бұрын
yotricks I used thin lube or This MCT oil
@yotricks 6 жыл бұрын
MCT oil will definitely make your yoyo responsive. What thin lube did you use?
@t4dollaz 6 жыл бұрын
yotricks yoyo Factory thin lube
@t4dollaz 6 жыл бұрын
Can I replace the pads even if I used MCT oil or will it still be responsive
@Tequilabeats03 6 жыл бұрын
Can I superglue my pads back? Or just glue them with a hot glue gun ???
@yotricks 6 жыл бұрын
Once they fall out it is best to replace them.
@develinallen9019 6 жыл бұрын
Is it one fit all ?? Or is there sizes ???
@yotricks 6 жыл бұрын
There are different sizes. We let you know on our site for each product what size pad it requires under the recommended section.
@develinallen9019 6 жыл бұрын
yotricks Is it possible for them to go bad in one day I get a sage yoyo from yall Yesterday It's been years since I've yoyo
@yotricks 6 жыл бұрын
What do you mean "go bad"?
@develinallen9019 6 жыл бұрын
yotricks Like it's not as responsive like it was
@yotricks 6 жыл бұрын
Develin Allen That just means the bearing needs a little thick lube. It has noting to do with the response pads.
@thepolarbear1380 7 жыл бұрын
Duncan pads suck . I bought a strix on Tuesday and both came out on Saturday yyf pads are great
@doodoostickstain 6 жыл бұрын
I hate to say I agree. Mine wore out stupid quick, and I LIKE Duncan lol
@Tatesmate 5 жыл бұрын
My Strix is still Holding after 2years
@edgymeme8821 7 жыл бұрын
Eyy
@vicenteecheverry766 7 жыл бұрын
how can you make a unresponsive yoyo like my dv888 unresponsive kit. into a responsive
@yotricks 7 жыл бұрын
Some yoyos allow you to put a slim bearing in them instead of a full sized bearing. If the bearing will fit, it will make the yoyo responsive. That being said, most yoyos will not hold a slim bearing because the bearing seat is too tall.
@vicenteecheverry766 7 жыл бұрын
yotricks how about like a glide yomega. Can that be responsive?
@Thr3leven 7 жыл бұрын
*gasp* he's using the older model Oracle!
@yotricks 7 жыл бұрын
Indeed ;) This video was made before the new run of Oracles arrived.
@stevenscottoddballz 7 жыл бұрын
#1.} Do ALL YoYos have Response Pads? #2.} My Duncan Butterfly pulls apart. It doesn't twist like yours. It doesn't have Response Pads, either.
@yotricks 7 жыл бұрын
1. No. Some yoyos (like the Butterfly) use starbursts instead. 2. Right.
@stevenscottoddballz 7 жыл бұрын
Got it. Thank you.
@hemalathadhanasekar9339 6 жыл бұрын
how to make a yoyo
@tdashnoakatno1475 4 жыл бұрын
I just got my yo-yo and they fell out...
@mostafaalmakkawi6309 4 жыл бұрын
What did you do? mine fell off too it's new
@tdashnoakatno1475 4 жыл бұрын
@@mostafaalmakkawi6309 I emailed the company and they sent me replacements... Where did you get it?
@Juan-nz1gu 4 жыл бұрын
The lube probably seeped into the oads
@prod.eenigma 6 жыл бұрын
i just changeded mine and it is supper slippy btw i used magic yoyo pads that always work for me
@yotricks 6 жыл бұрын
Try a different string.
@prod.eenigma 6 жыл бұрын
that didn't work it is still super slippy
@yotricks 6 жыл бұрын
Then it is either the pads, the yoyo, or your technique.
@prod.eenigma 6 жыл бұрын
it usally works but it just didnt
@yotricks 6 жыл бұрын
I would say that 9 times out of 10 if a yoyo is slippy it is not the pads.
@hypnoxxer 3 жыл бұрын
Why the heck does my yoyo works without response pads
@randomkidwholikedthisonech3964 3 жыл бұрын
wtf how
@hypnoxxer 3 жыл бұрын
Lol i got them now but that was weird
@mollies13 4 ай бұрын
your bearing is playing responsive not un now you understand even I can still play protostar without a response pad but remember that just makes you look stupid.
@JokerGaming-ld8ld 7 жыл бұрын
yoyo yoyoo yoyooo yooyoooo
@koitus 7 жыл бұрын
Why did you tell this i live in a country which doesn't have this response pads😭😭😭😭
@lavone5541 7 жыл бұрын
Someone- T_T you can order it online bro
@koitus 7 жыл бұрын
Thisya Yogini dude i dont know how to shop online
@lavone5541 7 жыл бұрын
Ask an adult to help you. If you are an adult, im pretty sure you can handle it. Its not that hard, but you need a credit card or something.
@leoncardona6311 7 жыл бұрын
Janos karancs tutorial please
@enant 7 жыл бұрын
Misteziz09 He records his own tutorials
@nicholaschung8207 7 жыл бұрын
The thing is my shutter and my horizon refuses to let me take out its bearing so i can only lube one side
@yotricks 7 жыл бұрын
Have you tried the multitool? kzfaq.info/get/bejne/fpegf5mcvr3aZGw.html
@kiancabarle123 7 жыл бұрын
first
@MrRiedemanJACC 5 жыл бұрын
Protip: Don't store your response pads where you store your lube. They might just grow if there's a leak.... Just sayin'
@mostafaalmakkawi6309 4 жыл бұрын
What do you mean grow? not work because i'm wondering why my pads are felling off my yoyo. they were stored with the lube and my lube was leaking
@marishlucas4067 7 жыл бұрын
Come on. The yoyo I wanted to buy was the fizz. And the international shipping is 14 dollars and the fizz 10. That is called stealing. Please reduce the price
@yotricks 7 жыл бұрын
We only charge what the postal service charges us to ship things.
YoTricks
Рет қаралды 90 М.