I have a full icon box soon to be delivered (73 / hutch / side lockers / top lockers). Like you, I will be a one man show putting this behemoth together. I am, however, worried about getting it pushed against the wall with the non-swivel casters - and I’m not in love with the idea of paying $250 for a set of swivel casters for this one purpose. I am curious if you had considered using a floor jack and a 2/4 to slightly lift under the static casters to push the box back? This is the approach I am considering - but curious (since you have been through this) if you see issues with this idea?
@unfilteredjamaican34789 күн бұрын
I will say I got some help for the overheads and would definitely recommend it. I do believe the delivery team should help unbox and setup. White gloves service they call it. I actually use that 2x4 and floor jack technique to shim mine level but am sure it could work as you described. Definitely lift only the minimum height you need, ensure the 2x4 is flush with the back of the box to ensure it can get as close to the wall as possible. Just be sure it doesn’t slip off as you push the floor jack. Be safe!
@Animatedtoaster10 ай бұрын
It’s crazy how similar it is to the Epiq boxes
@unfilteredjamaican347810 ай бұрын
Never seen one outside of KZfaq.
@paulmendenhall522610 ай бұрын
If you check the wait of the side lockers the icon is heavier than the Snap-on
@edgarmata710110 ай бұрын
❤👍👍
@gtcam723Ай бұрын
I was just wondering if it was feasible to mount an end cab and a locker on the same end.
@unfilteredjamaican3478Ай бұрын
I’m not certain, sorry.
@Free_entertainment4014 ай бұрын
I just bought a snap on 84 epiq tooo box. The snap on guy said if I was to transfer it, I need a flatbed tow truck, and the should hook 🪝 it from the caster pull it up on the flat bed. But snap on caster is heavy duty.
@unfilteredjamaican34784 ай бұрын
Good luck with any future moves. Moving can be a hassle
@sanagavizharan923 ай бұрын
I've got the double bank icon with two side lockers, hutch and two top boxes. It's been on a roll back twice since I got it. Make sure the tow company knows what they are doing and use the casters on the main box for the hooks.
@PapasHobbyGarage8 ай бұрын
a person should never try to move boxes half that size full
@paulmendenhall522610 ай бұрын
Trying to watch the video but it will not load
@unfilteredjamaican347810 ай бұрын
I was able to skip through. Give it a min and let me know
@paulmendenhall522610 ай бұрын
Still will not play
@paulmendenhall522610 ай бұрын
Ok got it
@paulmendenhall522610 ай бұрын
Thanks for the video vary helpful i left my stationary legs on so when i retire i can take it apart to move it home i am also making a baseboard that goes around the bottom of my box and lockers out of polished aluminum diamond plate
@unfilteredjamaican347810 ай бұрын
I thought about that idea. But it don’t make sense for the larger, heavier cases I slide beneath the boxes. I once saw a vid where it was done. That’s like a few extra drawers effectively.