How and why to adjust valves on a shim style Toyota 3SGTE

Рет қаралды 18,274

Жыл бұрын

❤️Like the video ???❤️
suscibe to help us create more content like this
What is a valve adjustment and how to I adjust my valves?
A valve adjustment is adjusting the clearance between the cam and the top of the valve. In between the top of the valve and the cam may be any sort of rocker arm, bucket, shim ETC. On these shim style Toyota engines like the 3SGTE, 2JZGTE etc they have a shim on top of the bucket and in late models below.
Also referred to as valve clearance

Пікірлер: 26

@milspectoothpick4119 Жыл бұрын

Slipping the shims out without taking all the caps off is such a nice trick. Had been dreading trying to check the clearances on my own cause my MR2 is fairly noisy and I feel way better about it!

@xiiimotorsports Жыл бұрын

Yes just keep in mind, 3rd gen and up is under the bucket and requires removal. 2nd gen is super easy but also prone to popping out with aftermarket cams and high RPM. Ive run up to 7800 RPM on the gen 2 no problem including usings 2step launch

@vmoney9106 9 ай бұрын

Nice, concise explanation. I'll be referring to this when I check the clearances on my 3RZ.

@xiiimotorsports 8 ай бұрын

Thank you appreciate it. 🙏🏽 look our for our video on valve lapping

@Murderizer212 5 ай бұрын

You gained a follower fellow engine head

@xiiimotorsports 5 ай бұрын

🙏🏽 thank you. Always a way to find more power 🔋 💪

@johnnytrain001 2 ай бұрын

Thanks for the informative video

@xiiimotorsports 2 ай бұрын

Thank you appreciate it 🙏🏾

@GameFlife 2 ай бұрын

Omg such legend engine tks u for the tips too

@xiiimotorsports 2 ай бұрын

Thank you

@user-rv7ek2bf7g Жыл бұрын

This really helps. I have to try it. My Toyota Corolla need some timing also

@xiiimotorsports Жыл бұрын

What year corolla ?

@warracer03 Жыл бұрын

Great video , wheres the best place to get these shims in canada ? Dealers or somewhere else ? btw your st185 subframe bushing kit is now at 200'000km on my car.

@xiiimotorsports Жыл бұрын

😜 Thank you! I have a lot of shims here, VS going to the dealer they are available. If you send me the sizes you need I can measure what I have. Glad to hear the rear kit is doing so well

@user-rr7hu4ln9h Жыл бұрын

Do you think this tool will work for adjusting Suzuki (M13A)? Thank you for the video really helpful and well done

@xiiimotorsports Жыл бұрын

I'm not familiar with the engine but this should work on almost any shim over bucket style tappet

@Chardorunks 3 ай бұрын

Just finding this video. Mine are noisy currently, where did you buy this tool?

@xiiimotorsports 3 ай бұрын

Blue point makes it, I'm sure there are some other types. I've gotten good at using a flat head and slipping it vertically between the cam to drop the bucket. Then a magnet to get the shim out

@eulinpetit-woodyear6816 2 ай бұрын

The nut and bolt type tapet might be easier to adjust but more often the nut strips and requires replacement 👎

@xiiimotorsports 2 ай бұрын

Honda style is easier for sure ! I'll do a video on that some day

@joseantoniodaly4875 3 ай бұрын

is it better shim on bucket or shimless bucket?

@xiiimotorsports 3 ай бұрын

For higher rpm use with a high lift cam you should change to shimless. But for rpm under 7800 shim with stock lift cams over bucket is fine

@joseantoniodaly4875 3 ай бұрын

@@xiiimotorsports thank you. I have ported and polished head with everything refurbished. Unknown I take cam and hks exhaust cam. Is it noticeable the power increment with stage 3 BC cams and shim less?

@xiiimotorsports 3 ай бұрын

@joseantoniodaly4875 what engine are we talking about ? 3sgte ? You will need a bigger turbo to support the increase in flow

@joseantoniodaly4875 3 ай бұрын

@@xiiimotorsports I have 3sgte and 6262.

@xiiimotorsports 3 ай бұрын

@joseantoniodaly4875 that's lots of turbo, you will be fine for air flow