Thanks Nigel!

Great to hear! So happy to be of help, mate!

Sure thing brother! Thanks so much for being a part in all this adventure with me!

Thanks brother! Man you'll love the Wizard flow- it really takes big wheeling to the next level.

Thanks! Glad you found it helpful.

Thank you! It has been an amazing setup for me and I think you'll really like it if they fit well for your feet.

Thanks man! They are amazing frames that really offer a good challenge.

Thanks man!

So happy it was a useful review for you! There is definitely a bit more flex with the FRs, but still a solid boot.

Thanks man! There really is quite the leap in feel between the two. Loving the content on your channel by the way!

Thanks so much! If only Wizard could sponsor us and we could accrue all the goodness much more quickly :)

@@CamGoodTimes Haha they don't need to, they have all the Shop Task ppl and more already.

Unfortunately this is true, lol. If only we could have jumped onto that years ago!

Hey sure thing! Thanks for the feedback- that's a good point. The full Wizard setup is heavier than the FR1. It doesn't make much of a difference for me personally. To be fair though, I am also a skier, and so perhaps the weight is not as noticable for me because I am used to much heavier skis. This is certainly something that can be an issue for some though and is worth mentioning.

Thanks for the feedback! I have heard great things about those frames so far.

Thanks! Great points. It's also great to go with the FR1 when uncertain of how much someone wants to be dedicated to Wizard Blading.

An interesting point is how the FR1 is designed. I think the comfort factor is partly due to the the way the liner sits outside the shell a bit. It feels less confined.

@@softlk8810 I agree- I think it then lets you have more option in how loose or tight you want to fasten the boot.

So happy to hear this was helpful to you! Thanks for the kind feedback. I have never used Powerslide boots, mostly because I have flat, wider feet. However, I have known people who have had good experiences doing Wizard skating with them, especially if you were to buy some NN trinity frames or something similar.

Thank you!

Thank you, Natan. I had not tried that before- thanks for the tip! I'll look into using those .

@@CamGoodTimes A good decent washer and a bolt ,can solve many problems . I usually order from Ebay etc .

Hey you are welcome! So glad to hear it was helpful. I don't currently have a way to accurately weigh both skates, but the SX Carbon doesn't personally feel much heavier than the FR1s. It seems the rocker of my NN dragon is quite similar to the rocker of Wizards. The Wizard frames feel a little more rigid overall, but both are still very durable, strong frames and this difference isn't very significant. Any other specific details you would like to know on these?

@@CamGoodTimes thanks that's good to know. I notice the Endless rocker is too subtle for my tastes and prefer the NN and glad to hear the NN is more like the Wizard in that sense. My only gripe is these setups are all so heavy. Oh well, time to hit the gym and get those squats in haha

Both of those would be great setups as well. The best one for you may depend on your foot width- FR1 tends to be wider fitting and Twister is narrower. Both are very supportive and well-made.

@@CamGoodTimes thank you for the feedback! I heard the new model twister is wide friendly. I'm fortunate enough to have access to a shop that has those models so I can try them on.

@@BuDu-ms2qe that's great to hear! I'm also a bit jealous you have a shop nearby!

Glad to hear! Thank you for the kind feedback. I've seen that Shawn Unwin video- completely amazing what he was able to do on those!

Thanks Justin! I have size 40 with both boots. The Ronin is an excellent all-around frame, with good speed and maneuverability. The dragon is excellent for super-smooth Wizard tricks due to a much shorter turn radius, but does not give you as much momentum or speed overall.

Great thanks I have FR2’s with endless 90 and would like to get 5 wheels next. Can you tell me how big of a difference is between 165 vs UFS for 5 wheels for wizard?

@@justinlaiduc9691 Sure thing! Even though 165 works well, it is even easier to control and maneuver with the UFS mount. The stability is superior with UFS as well due to lower ride height. Not a huge difference, but an important one for me because of how invested I am in Wizard blading at this point.

@@CamGoodTimes not what I want to hear haha! Ok might have to think about a 2nd set dedicated to wizard skating!

That's great! I hear those frames are awesome

¡de nada! Saludos de los Estados Unidos

That's a solid setup! I just used the FR3 velcro strap on mine. Ironically, it is made for the cheaper model but I like it better than the ratchet strap. It feels basically the same as the velcro strap used on my Seba SX boots.

Thank you, and excellent input! That's a shame those issues happen over time- I'll need to keep an eye out for that carbon issue. Perhaps this is why people opt for the soul plates on carbons sometimes (aside from doing grinds)?

Lastly, what worked well for you in covering the exposed fibres?

@@CamGoodTimes No worries! Yeah, best to make sure you check your boots from time to time. I didnt realize i had the forward flex issue before reading it on the swivel council discord! I imagine thats propably one reason why people use souls, yes!

@@CamGoodTimes I bought a good quality black duct tape and basically covered the carbon heel with 2 layers of it. To cover up the spots and protect it a bit. Its been working alright so far. But i have also since avoided doing tricks with higher risk of falling in that setup.

@@flyytaniac381 thanks again for all the feedback! This is super helpful.

Funny you should say that, I finally put some wax laces on my Seba SX just after recording this and you are absolutely right- it is a world of difference. I need to do the same with my FR1, as the laces are the same mediocre ones on those as well. My FR1 actually only came with the thin protective layer, and that's been working just fine due to downsizing with an intuition V2 liner. I also am using the intuition heel pad and I think that works perfectly for me in making sure I fill the shell in sufficiently.

I noticed that too, I had fr3 with thick glued insole, and had no space for my feet in 39 EU. Sold them. Now I bought Fr1 EU 40, and now it looks too big, I didn’t know they had a thin glued insole (2022 models I guess). So now I am wondering if the 39 would fit me again …

Thanks! That would totally be doable. The nice thing about wizard frames is some of them are also great for beginners! Mounting a 4x90 would be an excellent choice for that boot, as it would give you a lot of maneuverability and still be quite stable.

Wow, thank you for all your positive feedback and support, and I'm so happy to hear you have found these videos helpful! I have heard similar experiences with the Kaze- it seems to be a difficult fit for quite a few people. It can be frustrating to invest so much money just to experience more pain. I have found that the intuition liners have really been the main reason inline skating has worked well for me, and has basically eliminated foot pain from my blading. The FR1 has good built-in arch support that pairs well with the intuition liners. With your feet being 26cm, which is very close to my size, you may find the FR1 size 40 with a small intuition v2 liner a great fit for you. I am not experienced with the fitting of the FR intuitions unfortunately. However, this all also depends on how wide or narrow your feet are, as the FR1 does fit regular to wide feet, depending on the shell size. I recommend talking to @Shop-Task if you live in the States or Canada to get more specific sizing help, or I can offer other recommendations if you live in another part of the world.

@Cam Good Times, thank you for the response! I live in Orlando Florida so I will definitely reach out to Shop-task and consider the v2 liners. My width is 10mm. Thank you again for the response enjoy the long weekend and get some skating in!!

Hey sure thing man! Happy to be of help!

That combo is a magical one- look forward to every time I put them on for a session.

that special feeling is the hundreds missing from your bank account

@@wingdingdmetrius8025 Sadly this is also very true 😅

Definitely worth it though.

Hey sure thing! I haven't had the chance to try the UFR's. They seem to be a great UFS alternative for Wizard frames though.

@@CamGoodTimes are they good alternative to Seba CJ? Thank you!

@@YanVulich hey sure thing! From what I have heard, they have worked fairly well for people who have used them. Some have liked the fit and feel of the CJ's a bit more, but the UFR still seems to provide enough support for great wizard moves.

@@CamGoodTimes great, thanks a lot! From the pictures they seems a bit higher off the ground than Sebas. It seems important as mostly I intend to use them with 100mm frames

- Yes, same size for both, although this may not work for everyone due to different shell sizes in both models. -They both feel about the same to me as far as wideness in toe box. -both also feel about the same for me as far as pressure on the heel- they have both been comfortable, and the FR1's have been most supportive and comfortable for my feet overall (I have flat feet, and so I like the built-in arch support both provide along with the intuition liners).

Thanks! Here's some comparison: -The NN "Vm" frames seem to be pretty close to the rocker of the wizard frames. I haven't noticed much of a difference. I don't like the flow of the NN "V" rocker frames as much, as this initially causes more than two wheels to contact the ground at a time, but they are just fine as you wear them in. -NN now makes UFS frames, so those are a great budget alternative to Wizard if you are wanting similar feel. -Overall, both frames are super durable and I have not had any issues with either of them. -Both are similar in weight, but if you want specifics there, there is a post on Reddit that talks about it. Any other questions you have about that?

For additional info on this, @olderbladers did a great review comparing many different brands here: kzfaq.info/get/bejne/btOJjMiTsM-VfYE.html

Thanks for the feedback! Good points. Perhaps a more accurate way of describing the boot design would be to say the wizard intuitions were built perfectly for the SX to support Wizard moves, and as a combo it is amazing. That's also good to know about the durability over time- how long did it take for you to destroy one of the pairs, by the way?

@@CamGoodTimesI'd say 1, maybe 2 years, but I do agressive skating and I still use the "destroyed" ones (without sliders and ankle strap but still plenty of life in it) so I would not bother much, just pay attention when you crank the ankle strap up not being too rough, because its inserts will probably be the fist part to break (+ just glue back the skin when and where it fails to make it last longer).

Thanks for the tip! I'll keep that in mind.

Thanks for the tip! I've really wanted to get the FR SL speed. That looks like an incredible boot to use. They seem to be hard to find though- do you know where they tend to be in stock lately?

It is the SX Carbon from wizardskating.com. From what I understand, the CJs (carbon and plastic) main differences is they come with a stock liner that is less supportive than intuitions and have soulplates (detachable). Otherwise, they appear to be the same boot design and can be fitted with intuitions as well. Hope that answers your questions!

The support really is next level

I think it really depends on your experience with Wizard tricks. PR80 is amazing if you are just starting as well as for experienced skaters- it's very smooth to ride and pivot on. Wizard Advanced is best if you have a bit of experience, as it is the longest Wizard frame out there and demands some more precise technique due to the unique wheel configuration.

@@CamGoodTimes wow thank you for quick reply and an insight

Sure thing! Happy to be of help!

That's a great question. It has more to do with wheel size rather than length of frame. The higher the wheel size, the harder it is to maneuver due to more space between each wheel. Even though the Wizard Advanced frame is longer than most other Wizard frames, it is still easier to turn than a 4x100 frame. Since your feet are about the same size as mine, I would imagine a 4x100 or bigger would be challenging if you are new to Wizard skating, but the 5x76, 5x80, or 4x90 would all be great options to start from.

@@CamGoodTimes thank you for your quick informative response. I am a beginner to intermediate in inline skating (still practising how to stop😅). I am in the purchasing stage now. I have the SEBA high-light carbon 2018. I did a mistake by ordering the wrong size (one size smaller). It causes me pain and uncomfortable skating. I was planning to get the Iqon TR10 with a TR90 frame. But I am a little bit confused about why all are getting an aggressive boot for that. There are so many frames for an urban skate. I am a little bit lost here.

@@anas7hamed you are welcome! It is understandable how confusing it can be seeing so many different kinds of setups. The reason the Wizard frames were originally made for aggressive boots was to help keep your foot as close as possible to the ground for maximum control. At the same time, the 165 mount frames work great and you can still do any Wizard moves in them. They just aren't quite as precise and stable as the aggressive (UFS) mount. Another thing to keep in mind is not all aggressive boots will work well for Wizard skating- it's best to have plenty of ankle support and ideally have a 45° strap or a good lacing system to lock your foot down further (keeping ankles locked down in the boot). The IQON seems like it would be a good boot for Wizarding with the carbon shell and cuff it provides.

@@CamGoodTimes much appreciated. now I understand why they focus on SEBA CJ/SX and IQON AG10. did you try the IQON decode pro frames for wizard skating? but if the key for wizard-style is to keep your foot as close as possible to the ground why they did not choose the trinity mount? according to my knowledge, it provides the closet setup to the ground. now I am in between the IQON TR10 and AG10. what do you think? which one do you think provides more comfortable skating?

That would likely be a great setup. I personally think the AG10 would likely be more comfortable as well. It really depends on what fits your foot best though. I haven't yet tried any of the IQON products, but my friend has loved using their frames on his Rollerblade Twisters. Wizard frames were developed almost a decade ago, and so I think that was before Trinity was released. At the same time, it seems the UFS mount is still particularly beneficial due to the heel part also being low to the ground.

Oh that's right! Thanks for reminding me. I still need to give that a go. How has it been for you so far?

I usually find them at either Inline Warehouse or Thuro Skate Shop.

Haha well you have a point there as well.

I didn't realize you could run 4 bolts like that on the FR1. This video was made almost 2 years ago, so I imagine many more budget options have become available since that time.

Hey I can tell you that a lot of skates tend to be discounted lately, so hopefully that can help!

¡Ojalá tuviera dinero para comprar y probar ambos patines! Ambos parecen ser de alta calidad y muy divertidos.

Thanks for the tip! It can be hard to really tighten the Seba cuff effectively. How did you attach the strap to the cuff?

That's great you have found a skate that suits your needs and desires.