How ENKHO Battery Becomes PARKSIDE Battery

Рет қаралды 20,107

3 жыл бұрын

Пікірлер: 36

@markmather4161 3 жыл бұрын

He folks, I understand that Parkside is made by an Einhell daughter company. I wonder whether Parside and Einhell can be interchanged more easily? Also I am wondering who makes the batteries for Ferm and Ferrex (Aldi) and whether there are any adapters on the market which would make those cheaper batteries usable on makita drills etc. The might not last as long before empty but he I can buy two or tree of those batteries for the price of one Makita battery. :-)

@robsonley918 2 жыл бұрын

I think aldi tools are made by worx hope this helps.

@BenMitro 3 жыл бұрын

They get that complicated to protect their battery sales...must be important to them. Only standards/legislation for connections between battery and tool will really solve this forced incompatibility issue.

@powerbatterychannel4315 3 жыл бұрын

There was time when almost all the mobile phone brands had their own charger/connector. But the situation changed. Maybe it will be also changed in the sphere of cordless tools.

@BenMitro 3 жыл бұрын

@@powerbatterychannel4315 That's true. I still think all industries need firm guidance otherwise they go rabid.

@charisma-hornum-fries 2 жыл бұрын

@@powerbatterychannel4315 I’ve recently heard that it’s going to happen within the EU the same as they set the charger ports to USB-C.

@tomxx81 Жыл бұрын

Thanks for this, I'm using custom battery pack for Parkside Cordless Grass Trimmer PRTA 20 Li C3 and it didn't work until I add the 10k resistor!

@powerbatterychannel4315 Жыл бұрын

You are welcome. Please, subscribe to my another channel: kzfaq.info/love/bQUNw5V5pDPXugLX1FP_Fg

@derdrolftesinn 6 ай бұрын

Thanks very much, i searched for the Value of the middle pins to run parkside Performance tools at 5 cells. With only positive and negative,the tools dont run,show error. Thank you

@williamkilgore7794 3 жыл бұрын

hi, how strange, I tried to connect a 13k resistor in the two parkside terminals and it works

@MrRoss295 2 жыл бұрын

Spectacular! So with this procedure I might be able to charge an enkho battery with the parkside battery charger? Thank you! You have a nice channel!

@powerbatterychannel4315 2 жыл бұрын

No, parkside battery charger reads ID from ID contact.

@MrRoss295 2 жыл бұрын

@@powerbatterychannel4315 Thank you so much my friend!

@Cor613-of5kj Жыл бұрын

Puoi fare il video dove metti la resistenza che non si vede

@giuseppezaza6985 Жыл бұрын

good to know but after cutting/isolating third pin near negative connector with BMS circuit not connect, are you able to charge correctly the Enkho battery with its charger? I think the charging process will not be good

@powerbatterychannel4315 Жыл бұрын

In case of my changes Enkho charger most probably will not recognize the battery.

@nicholasciampa5494 Жыл бұрын

Good job, but the enkho battery, then can you still use it for enkho tools?

@powerbatterychannel4315 Жыл бұрын

Can't define, as I have no Enkho tools, but I have some Enkho batteries and Parkside tool :)

@therednask Жыл бұрын

Pomocny ??? ty mi życie tym tłumaczeniem uratowałeś :) i dużo zmartwień :) mniej . Helpful ??? you saved my life with this translation :) and a lot of worries :) less.

@frenk_1519 2 жыл бұрын

hi, I don't understand what needs to be cut. I would be grateful if you answered me

@powerbatterychannel4315 2 жыл бұрын

A thin line which is shown with an arrow; also you can see that I've cut it - there is a trace of a sharp knife - 7: 46

@Lollix46 2 жыл бұрын

Great video! Do you know how to charge that type of enkho battery? I have two but I don't have charge and Parkside charger doesn't work.

@powerbatterychannel4315 2 жыл бұрын

Parkside charger won't work, of course, as it needs the corresponding ID signal from ID pin of the battery. You can use any charger with DC-DC converter and adjust it to 20V and 2A. Connect + and - to the corresponding slots of the battery.

@Lollix46 2 жыл бұрын

@@powerbatterychannel4315 thank you! So I can use a charger like the imax B6?

@powerbatterychannel4315 2 жыл бұрын

@@Lollix46 No need of it, - even more simple charger :)

@Lollix46 2 жыл бұрын

@@powerbatterychannel4315 thank you!!

@bjorncarlsson7132 2 жыл бұрын

I will buy a Parkside chainsaw, PKSA 40-Li A1, which requires 2 batteries to operate, is it possible to use one PAP 20 B3 + one PAP 20 B1?

@powerbatterychannel4315 2 жыл бұрын

Hello, can you tell me what is the difference between PAP 20 B3 and PAP 20 B1?

@bjorncarlsson7132 2 жыл бұрын

@@powerbatterychannel4315 No, I don’t have a clue, that’s why I am asking.

@powerbatterychannel4315 2 жыл бұрын

@@bjorncarlsson7132 PAP 20 A1 and PAP 20 B1 are 20V 2 Ah batteries; PAP 20 A3 is definitely 20V 4 Ah battery. So, PAP 20 B3 also should be 20V 4 Ah battery. In this case PAP 20 B3 should not be used together with PAP 20 B1 because of different capacities, as you have 40V-device, so, one battery will be flat twice sooner than the other.

@bjorncarlsson7132 2 жыл бұрын

@@powerbatterychannel4315 Thank you!

@powerbatterychannel4315 2 жыл бұрын

@@bjorncarlsson7132 You are welcome!