How I Built My Own Tire Machine at Home!
Рет қаралды 8,204
Жыл бұрынIn todays shenanigans we are figuring out how to create the best manual tire changer on a budget! We had some hiccups on the way but now, I never need to visit a tire shop again, hooray!
If you have any questions about this process, feel free to ask them in the comments and I'll answer every single one. Have a great day!
Product List:
Manual Tire Changer -
www.harborfreight.com/manual-...
Duck Bill Mod -
www.ebay.com/itm/115378446519
Tire Iron -
www.harborfreight.com/24-inch...
Tire Hold Down Clips -
tinyurl.com/rw65a2ck
Centering Cone -
tinyurl.com/2s47pbp5
Valve Stem Tool -
tinyurl.com/7fbjxk4e
Air Compressor -
tinyurl.com/3zzdsy2y
Air hose -
tinyurl.com/3757fdpp
Air Chucks -
tinyurl.com/2a6fy6mt
Any links too long for the description were shortened using tinyurl.com for easier viewing. I am not sponsored by any of these product manufacturers and can not be held responsible for their effectiveness.
@BillAnon 6 ай бұрын
That centering cone you bougt is more important than that red 4 point insert. You can just toss that if they both don't fit.
@bobrossi1185 6 ай бұрын
Most important thing is bolting down to concrete get drop in anchors it makes it night and day Mostly. You don't usethe red cross when using cone.
@Thatcaviboy05 5 күн бұрын
🤙
@MrOner07 4 ай бұрын
crazy how the duck bill mod is twice more expensive than the actual tire changer... bro you got ripped off.😂
@gosteazy 3 ай бұрын
Considering it's about $40 each time I go to the tire shop to have my rear tires swapped, this budget tire changer has paid for itself so many times over
@MrOner07 3 ай бұрын
@@gosteazy thats awesome and im happy for you bro... but you still got ripped off. 😂
@DrMikeOxgreen 3 ай бұрын
It's the way the prices go. Duckbill is usually the more expensive part
@gatesj777 2 ай бұрын
Uh yeah the mod is the part that makes it work. Tire changer is fine for completely roached out rims and testing your strength. Mod makes the changer actually useful. Trust me I've used it both ways.
@dirtmover123 Ай бұрын
So care to tell us where to go to not get ripped off? Oh, and if you're going to suggest diy don't forget to either include the cost of tools necessary to fabricate it or the cost of hiring someone to do it for you.
@sstjacques 2 ай бұрын
I did this, too much movement on pallet or bolting to wood deck.. have to bolt to concrete for zero movement... Too much forces to mount new tire will make this setup move making it harder. This worked for 2 tire dismounts for me until crap loosened up.
@gosteazy 2 ай бұрын
Yes bolting to concrete is the best way. However, I can't do that, so I chose the free pallet
@joevarga5982 2 ай бұрын
11:23 What do you mean it's not going to fit? We just saw it on there! 11:11
@joevarga5982 2 ай бұрын
11:32 Hell yea! Scrape the shit out of that wheel!
@gosteazy 2 ай бұрын
Thanks for the comment Joe
@joevarga5982 2 ай бұрын
@@gosteazy Thank YOU for being so careless.
@gosteazy 2 ай бұрын
@@joevarga5982 Thank YOU for the engagement!
@joevarga5982 2 ай бұрын
@@gosteazy Don't mention it! To anybody.
@tigerbalm666 7 ай бұрын
You don't has a balancing tool...
@gosteazy 2 ай бұрын
Drifting on these wheels, no balancing needed
@philtowle4683 2 ай бұрын
You can add a bubble static balancer to the machine.
@parkercustoms462 Ай бұрын
Airsoft BBs are cheap.... I pay $2.99 a tire to balance 33" tires for the rest of their life.
@jthealy72 20 күн бұрын
@@parkercustoms462you just put them into the valve stem and they roll around? Never heard of this approach. Need to learn more about it
Matt's Automotive Channel
Рет қаралды 457 М.
Quick Speed Shop
Рет қаралды 6 М.
DriftSanti
Рет қаралды 14 М.
HVAC Mechanic
Рет қаралды 1 М.
Авто Гараж 23
Рет қаралды 4,4 МЛН
МАРТИН БОГАТЫРЕВИЧ garage
Рет қаралды 589 М.
Lilsnoop213
Рет қаралды 39 МЛН