How i fixed code P17F0-CVT transmission judder on a 2017 Nissan Pathfinder using Autel IM608

Рет қаралды 63,777

Күн бұрын

Check out my social media!!!!!
Snapchat- / javin
facebook- / regzastar
Insta- / nietojavi
Tiktok-www.tiktok.com...
=====================================================================
Hi guys welcome to my channel i have been working on cars my whole life and now that i have accumulated tons of experience and knowledge i want to share it with you.
I upload new videos every week stay tuned!!!!
Thanks for watching, please like and subscribe and god bless you!!
Disclaimer: JVFIX assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. These videos are only for educational purposes and i am not responsible for ANY INJURIES OR ACCIDENTS, DO IT AT YOUR OWN RISK!!!

Пікірлер: 128

@mandybaker8544 9 ай бұрын

Thanks I have been wondering how to do that correctly without fawking something up! Appreciate it!

@JVFIXLLC 8 ай бұрын

no problem

@faithcanaleswolter4842 2 ай бұрын

Thanks! Worked perfect

@JVFIXLLC 2 ай бұрын

mo problem

@julianmorales5235 Жыл бұрын

muchsimas gracias por tomarte el tiempo para compartir tus conocimientos y ayudar a los que estamos aprendiendo.

@JVFIXLLC Жыл бұрын

no problema gracias por visitar el canal. bendiciones

@alexanderhenrriquez5563 11 ай бұрын

@@JVFIXLLC buenas noche amigo disculpe que neseito aser en la conputadora para poder programar un cuerpo de balbulas de un nissan paifander 2013 yo tengo el j2534

@merlinssbambi3951 9 ай бұрын

@clutchdrops451 10 ай бұрын

Awesome video, saved me so much time 👍

@JVFIXLLC 10 ай бұрын

thanks for watching

@GB-xh7hv 6 ай бұрын

I just got this code on my 2014 Pathfinder. Three times this week my car stopped accelerating in Drive and reverse. I took it into a shop. First they said Alternator done. Replaced. Breaks down the same day. They then replace the battery. Broke down today. 2 visits and 2 Tows later and I am down $2200 with no SUV. I tried again today and it did drive back up my driveway (it was stuck in the culdesac street), but I am too paranoid to drive it now. Only using my Tesla until I figure something out

@JVFIXLLC 5 ай бұрын

danng, I am sorry you had to go through all that, but looks like your issue will be the whole transmission buddy check with dealer there is a lawsuit, and the dealer needs to pay for replacing the trany

@depooltrd Жыл бұрын

muchas gracias, acabo de quitarle el judder code que tenia, a ver si no vuelve a salir.

@JVFIXLLC Жыл бұрын

ojala no. todos Los que he reprogramado ya no han vuelto pabatras gracias a dios

@juliozermeno2644 27 күн бұрын

Very nice tool!

@JVFIXLLC 26 күн бұрын

yea indeed it is

@daddy1kev 8 ай бұрын

Hola qué tal excelente video, acá tienes un nuevo subscriptor, Disculpa dónde puedo encontrar el código para escanearlo en un 2014 nissan pathfinder?

@JVFIXLLC 7 ай бұрын

gracias por subscription, la etiqueta siempre esta encima de la transmission en el range switch sensor.

@abbshus7421 Жыл бұрын

Well done Javier ... Thx🎉

@JVFIXLLC Жыл бұрын

thanks for watching

@jnt4591 5 ай бұрын

Great video bro.. ive replaced the valvebody on my xtrail and it came with a cd can i use my scanner to scan the barcode on the cd.. ive never done this before but i wanna learn cause ive done alot of valvebodies and nissan always does the calibration.

@JVFIXLLC 5 ай бұрын

Yes you can

@JuanHernandez-bg9mf 3 ай бұрын

Amigo tengo ese código en mi Altima 2017. Siento una vibración cerca del acelerador solo cuando voy a 100km. Puede ser falla en la transmisión? Nota: el vehículo no está alineado y balanceado todavía

@JVFIXLLC 3 ай бұрын

si amigo puede que si sea la transmission salieron muy malas estas transmisiones para estos carros

@SmithKoku-mo2xd 10 ай бұрын

i am from Ghana bro its a problem that most modern nissan vehicles are facing i will be very glad if i can get intuch with you personally cos i repair t'he variables My self thanks waiting for respons

@JVFIXLLC 10 ай бұрын

yea u can send me an email at jvfix2021@gmail.com

@Latinachanel52 9 ай бұрын

I have the same problem I need help please is there a way I can contact u

@JVFIXLLC 9 ай бұрын

u can email me jvfix2021@gmail.com

@mirceabirla7971 2 ай бұрын

losind camera foto Hello ! I repaired a nissan x trail 2017 dci 177 hp with a cvt box. And I can't clear the P017f2 judder inspection error code. Please, if you can, help me with an opinion

@JVFIXLLC 2 ай бұрын

it needs to be reprogrammed.

@aranaraz8607 Жыл бұрын

Does that mean that the transmission have problem? There is a car that had this code and now the code is gone should i buy it?

@aranaraz8607 Жыл бұрын

Its a nissan Altima 2017

@JVFIXLLC Жыл бұрын

this code is about programming issues not mechanical u need to test drive it and you will know if the transmission is good

@serglazz81 9 ай бұрын

Can i just type in code instead of scanning? I dont have a way to scan a code on my autel.

@JVFIXLLC 8 ай бұрын

you can, you can pause the video and use the code sequence, just do it at your own risk.

@saidiiyad2615 8 ай бұрын

😂

@JephonyDadoli 5 ай бұрын

Good job sir..

@JVFIXLLC 5 ай бұрын

thanks

@georgeerowkaggies31 6 ай бұрын

That's great but am working on my 2013 infinity jx35, I have changed the transmission and the TCM but the TCM is new one but when I put my car into driving mode and started driving 1 gear up to 6 gear it vibrate . Pls help me out. Am will be waiting

@JVFIXLLC 5 ай бұрын

I think your problem might be the tires vibration. do you have check engine codes?

@TrooAls 2 ай бұрын

Good job 👍

@JVFIXLLC 2 ай бұрын

Thanks 👍

@charlyreyesolivares197 Жыл бұрын

MUY AMABLE GRACIAS POR COMPARTIR LO QUE APRENDES ME SIRVIO MUCHISIMO EST info GRACIAS Y SALUDOS👍👍

@JVFIXLLC Жыл бұрын

gracias por visitar el canal saludos

@albertorojo6076 5 ай бұрын

Thanks for your video, Where are you located?, I’m in south Florida

@JVFIXLLC 5 ай бұрын

no problem, I am in California

@capemp1 2 ай бұрын

@JVFIXLLC Hay algun numero para contactarte? Tengo ese problema con mi carro

@geo5600 6 ай бұрын

Cuanto es el costo de ese trabajo en un taller en new jersey? Me interesa

@JVFIXLLC 6 ай бұрын

yo se lo hice gratis a un cliente. pero creo que sale de 120 a 180 dependiendo tu area

@geo5600 6 ай бұрын

Donde esta tu para que me hagas ese trabajo? Yo estoy en new jersey!!!

@JVFIXLLC 6 ай бұрын

yo estoy en California

@ahmed99924 11 ай бұрын

I do this jop but one of the car nissan altima 2018 v6 has an problem after reprogramming the rsponse is slow and the cas do not run fine

@JVFIXLLC 11 ай бұрын

did the transmission had problems before?

@user-qx3ns8si3d 8 ай бұрын

I tried this with my Autel Maxicom 908 pro 2 an it erased the data but but when trying to Write it says Function not supported. Could I be doing something wrong.

@JVFIXLLC 8 ай бұрын

that scanner model has limited functions

@transmisionesvicab Жыл бұрын

Hola sabes si con un MS906s puedo hacer esto ?

@JVFIXLLC Жыл бұрын

creo que esa no va funcionar porque no viene con j2534 interface

@transmisionesvicab Жыл бұрын

Y con el Pro ?

@transmisionesvicab Жыл бұрын

Es que busco pero la opción cuando se cambia el cuerpo de valvulas o la transmisión y veo no aparece ahí la opción

@askaritaylor6855 5 ай бұрын

My transmission range sensor barcode is faded 😢I can’t scan it what should I do

@JVFIXLLC 5 ай бұрын

you can search one on ebay and take a picture or zoom in the picture and scan it

@moayado436 5 ай бұрын

Great info sir Does it work with im508

@JVFIXLLC 5 ай бұрын

I think it does as long as u have the subscription on your tablet active

@moayado436 5 ай бұрын

I hope so cuz the im508 doesnt come with a J2534 device

@Just0ke 5 ай бұрын

I have an autel ms 919. My subscription expired. Is there any way to reprogram it without a CD

@JVFIXLLC 5 ай бұрын

I am not sure if your model has the function, and I believe you need the subscription to do it

@mooooohamadmm Жыл бұрын

I need to know , you took the code from the original transmission or the new one?

@JVFIXLLC Жыл бұрын

i took it from the new transmission.

6 ай бұрын

Necesito al menos ver como obtener información en español o subtítulos

@JVFIXLLC 6 ай бұрын

que ocupa amigo?

5 ай бұрын

Hombre tengo ese problema en República Dominicana 🇩🇴 con mi vehículo y antes que nada quiero intentar hacer esto que dices

5 ай бұрын

Hice todo la dialisis de la transmisión y cambie todos los sensores a los originales, solo falto el del oxigeno y al principio funciono de maravilla pero luego ocupo este codigo y no avanza y es lenta al agarrar los cambios

@vipulshrimali7439 11 ай бұрын

I have Nissan sentra 2014 136 k km millages . How can I fix it without replacing or repair it

@JVFIXLLC 11 ай бұрын

does your transmission have problems like yerking or pulling or rpms ip and down

@juancamaney2888 8 ай бұрын

@@JVFIXLLChi mine does some times, the rpms with cruise control goes from 2000 to 2700 in a suddenly for a short period, can I try this or it is actually bad the transmission?

@oildallastx4692 4 ай бұрын

New subscribers

@JVFIXLLC 4 ай бұрын

thank you

@Hlgtrrz22 5 ай бұрын

Hola amigo una pregunta donde estas localisado esque tengo ese problema con mi auto y nececito arreglarlo?

@JVFIXLLC 5 ай бұрын

yo estoy en visalia California

@Hlgtrrz22 5 ай бұрын

😅k

@MechanicTechnicianRepair Жыл бұрын

exselentes dianostic master mui bien men

@JVFIXLLC Жыл бұрын

gracias. saludos

@bpaquette2147 Жыл бұрын

I did this and the judder code is gone but the transmission is making noise and shifting hard is this normal ?

@JVFIXLLC Жыл бұрын

is yours cvt?

@bpaquette2147 Жыл бұрын

Yes same CVT nissan

@JVFIXLLC Жыл бұрын

check the oil level and if it's ok then I am afraid it would be your transmission. and also these CVT transmissions do not shift it just goes without shifting. arer u sure u installed a CVT?

@edwarddrayton5758 11 ай бұрын

I registered mhhauto, however I do not see the area for the Nissan Ners area..How do I go about that?

@JVFIXLLC 10 ай бұрын

I have the ners software I have it for sale cheaper than the dealership

@edwarddrayton5758 10 ай бұрын

@@JVFIXLLC Hi, is this software the same as accessing the nissan tech-info site?

@valentingonzalez2745 4 ай бұрын

@@JVFIXLLC how much?

@fernandos6330 7 ай бұрын

Where are you located??? How much would you charge to do it?

@JVFIXLLC 7 ай бұрын

in visalia California, and if you saw this video and are subscribed I'll do it for free.

@fernandos6330 7 ай бұрын

@@JVFIXLLC i wish i were there... I am in fl... But i will subscribe awesome video .. Thanks for taking the time to make them... 🙏👍

@boss17871 7 ай бұрын

Nissan altima 2016 Can you do that to a 2016 Nissan Altima?

@JVFIXLLC 7 ай бұрын

yea is the same transmission

@fairbusiness8991 3 ай бұрын

Im having this problem wit 67k miles. Anyone in the Washington dc area who can perform this?

@JVFIXLLC 3 ай бұрын

call the dealership it should be under warranty

@benjaminlevi7792 Жыл бұрын

Good job

@JVFIXLLC Жыл бұрын

thanks for watching

@Julicauto 5 ай бұрын

Which interfaces work with NERS? THANKS

@JVFIXLLC 5 ай бұрын

I use Autel j2534 that came with scanner im608 but are many out there.

@Julicauto 5 ай бұрын

@@JVFIXLLC really? Wow! I have that one. I also have the MDI 2, do you know if that one works with NERS too? Thank you for respond 🙏🏻

@kattynieto1836 Жыл бұрын

great video

@ishmaelsanudi7985 Ай бұрын

5555FFFE0000001CFFAD2D2E00000000000501230FE2000000000023FFB12D3B000000000023FF892A4A000100000026FF04554100000000000000910034009D00FF000200FF00FF0035EE0600C300A400F600F6FF9AFF85FF71FF66FF14FF8F000A0029001F001FFFD70000000000340000060061004C0D460F00000000F91C787800120007000733565832443030303537303236303430353700910034009D00000000000000000000000000000000EEFD

@MgKyaw-TuntShua Ай бұрын

Do u think it work with IM608 pro

@JVFIXLLC Ай бұрын

yes it will

@MgKyaw-TuntShua Ай бұрын

@@JVFIXLLC thank , it worked !

@JVFIXLLC Ай бұрын

no problem

@georgeerowkaggies31 6 ай бұрын

My infinity jx35 has no tcm code

@JVFIXLLC 5 ай бұрын

you have a vibration issue, check also your axles

@jesusyrureta8025 9 ай бұрын

Hola hermano como hago si no tengo el código?

@JVFIXLLC 8 ай бұрын

puedes buscar un range switch que venga con la etiqueta nomas asegurate que sea de una trans cvt y similar el año

@joellopez3793 Жыл бұрын

Como checo un corto en una pathfinder 2015.,no prende,no enlaza el scanner y descarga la pila en minutos..solo prende el tablero, luces y los ventiladores.please help me. Un rayo proboco eso.

@JVFIXLLC Жыл бұрын

lo primero tienes que hacer es desconectar los ventiladores pa que no sigan girando y luego checar fusibles uno por uno con la llave abierta si todos los fusibles estan ok entonces varios modulos se dañaron con la descarga de alto voltaje que recivio.

@joellopez3793 Жыл бұрын

@@JVFIXLLC Muchas gracias. Fucubles ok ,Alternador en corto. Checare modulos..

@alexquezada510 11 ай бұрын

By any chance are you in California

@JVFIXLLC 11 ай бұрын

yes I am. I am in visalia California

@alexquezada510 11 ай бұрын

@@JVFIXLLC thanks for the reply I have. 2014 pathfinder 3.5 awd. Transmission I think is done for doesn’t move and I hear a rattle. Only 80k miles crazy. Probably just going to sell it my friend said he will give me $4600