Johnny, Your install video is the best I have seen.
@Johnnys_Off_Road_Adventures Жыл бұрын
Thanks I really appreciate the feed back
@henrycamacho3 ай бұрын
Great video … you explained simply and clear..
@Johnnys_Off_Road_Adventures3 ай бұрын
Glad it was helpful! I tried to make it the way I would like to see it done.
@GilbertMendoza9 ай бұрын
Loved this video! I already installed mine, but now that I've seen yours, I have rethought some things on my installation. First, I love the you used you factory AUX4 for the Ignition sensor. I used the fuse tap to bum off the heated seat fuse which works, but there are some situations where my engine is off and I might want some of my lights on. (Rear emergency fog strobes, rock lights, or anything I don't mind running on battery for limited periods of time). The AUX buttons of the Jeep allow you to choose work on Ignition or Battery, so now we can choose when the Vox switch can be used. Best of both worlds! Bravo! Second, the button visual tutorial really helped me understand the master switch option. Made more sense seeing it in action, so thank you. Third, I didn't know about the wiring channel in the engine bay. I've typically used the wiper bay and cowl opening behind the firewall, which is fine, but this opens up new options. Tons of great little nuggets of info. Thanks so much for the effort you put into the video. 🤘🏾
@Johnnys_Off_Road_Adventures9 ай бұрын
Thank you very much for your reply. I’ve really enjoy hearing how much help you got from my video. And a huge thanks for taking the time to watch and then share your thoughts.
@Ice_Diver_Ed10 ай бұрын
BoxWow your dewalt tools feel like it needs a new paint job. I love how everything matches the ryobi tools.....
@Johnnys_Off_Road_Adventures10 ай бұрын
Thanks to be honest it was kinda a happy accident my brother started buying ryobi so I just figured why not expand
@aperihanawinikerei109611 ай бұрын
Finally an honest install an review 👌🏼
@Johnnys_Off_Road_Adventures11 ай бұрын
Thanks that was the deal when I did this was good or bad I have to be true to you guys. Thanks for taking the time to watch and comment I really appreciate it.
@Marie-kj3xf12 күн бұрын
You cannot put down the windshield on a JL with the Sky One Touch Roof. I removed the cowl, then just f nagled the wire to the grab handle. Works fine
@Johnnys_Off_Road_Adventures12 күн бұрын
Good to know thanks. But the opening in the fire wall is that same on all of model jeeps that’s why I recommended that way. But I am glad you got it to work out for you
@Q80hobiecat635 ай бұрын
20mm sir is definitely more than half an inch 0.79
@Johnnys_Off_Road_Adventures5 ай бұрын
Thanks I appreciate the feedback
@user-ft2qc1vy2e Жыл бұрын
Is there a version you could use in a semi-truck so that you could easily have flashing amber lights for safety?
@Johnnys_Off_Road_Adventures Жыл бұрын
Try this it should work for your application. Voswitch UV100 8 Gang Programmable Switch Panel Power Control System for Truck UTV Side by Side Boat 12V Battery Use a.co/d/34RkP27
@Lomaxx7778 ай бұрын
Where can I get a list of these instructions to program?
@Johnnys_Off_Road_Adventures8 ай бұрын
Here is the link to their actual website and if you scroll all the way to the bottom, you’ll see a late that says instructions and one oh say install and the other one will say program video click on the program video and it will walk you through all of the steps to Adjusting everything like that. www.voswitch.com/JL800-Handle-switch-for-Jeep-JL-Wrangler-2018-2023-and-Gladiator-2020-2023-p2012038.html
@Johnnys_Off_Road_Adventures8 ай бұрын
Also, if you have any more questions or that feel free to ask, I’m very happy to help and thanks again for watching my video and commenting
@Johnnys_Off_Road_Adventures8 ай бұрын
Hope this makes it easier for you December 27, 2023
@Lomaxx7777 ай бұрын
@Johnnys_Off_Road_Adventures thanks I how the link and downloaded it. My switch lights are so bright I have to turn the switch off at night while driving. I didn't know it was dimmable
@Johnnys_Off_Road_Adventures7 ай бұрын
@@Lomaxx777 no problem. Glad I could help.
@ismaelrivera749Ай бұрын
Even though you used your factory Aux #4 that it's the 15Amp. You connected more than 15Amp to the Voswitch. Is it going to affect if a turn on a lot of light a the same time for a long period of time?
@Johnnys_Off_Road_AdventuresАй бұрын
Well actually I learned later that I didn’t even need to do that from factory there is a Dip switch set to use the main power off the voswitch so you only need to hook the ground. Also as per your question yes it is just a signal wire to activate the relay so needs very little amps to operate.
@Johnnys_Off_Road_AdventuresАй бұрын
So I later learned that the VoSwitch has a Dip switch inside that comes preset to run directly off the power coming into the box so you only need to use the ground wire. But to answer your question yes it’s okay that wire is only a signal wire and requires very little amps to activate the relay. Thanks for watching and asking questions I appreciate it and love to help.
@ismaelrivera749Ай бұрын
Thanks, this video is great.
@Johnnys_Off_Road_AdventuresАй бұрын
@@ismaelrivera749 glad I could help Feel free to reach out if you need more help.
@ismaelrivera749Ай бұрын
@Johnnys_Off_Road_Adventures hi, I just bought and got the Voswitch, can you do a video explaining the connect you told me about the Dip and the box?