@warrenpeas Жыл бұрын
people always ask "how much more oil do i put in my engine when using the oil cooler" and you just answered it by filling up the oil cooler BEFORE you put it on the bike.
@freddieRODZ Жыл бұрын
I mean. That’s the most obvious thing to do 🤷♂️
@Lei.theRogue Жыл бұрын
She’s come a loooong way 🔥
@CTRYDNCBR600 Жыл бұрын
It’s lookin real good man! Good stuff!✊️
@anthonylebron5301 Жыл бұрын
Looking good can't wait for mines to get did!!!!
@t2d2420 Жыл бұрын
Idc I can deff feel the difference
@t2d2420 Жыл бұрын
Finally got mine installed should of done year ago
@chuckcornell6033 Жыл бұрын
Watch those line, I use the same kit. When they got good and hot one actually kink off, right at the fitting, I didn’t have to tight of a bend in the line but it happened. Good luck.
@freddieRODZ Жыл бұрын
Thank you I’ll watch for it
@desertwolfarmory 11 ай бұрын
So as for the extra bolts you used where would to be able To find them? Only because I don’t have stuff laying around like you do lol.
@lifeofjustinjames Жыл бұрын
Ohhhweeeee
@hiflow600 Жыл бұрын
👌👌
@redlinejosh4974 Жыл бұрын
If you change the oil of the bike do you have to had oil again to the oil cooler ? Great video by the way
@freddieRODZ Жыл бұрын
I don’t think so. I just did so it doesn’t starve since it has more space for oil.
@redlinejosh4974 Жыл бұрын
@@freddieRODZ awesome thanks for the reply brother love your videos and keep up the amazing work, these clone are amazing mines has been nothing but loyal and fun to ride here in Miami
@troydn4497 11 ай бұрын
Is this good for riding long distances I've been tearing up these lil Chinese engines
@freddieRODZ 11 ай бұрын
i dont think it would hurt, i mainly got it for the 141cc kit, nd its been running smooth since
@kaasarijonne 3 ай бұрын
Sorry to ask late but how thick are those oil hoses are they 8mm or 10mm?
@damianchildress5405 Жыл бұрын
Cheeryyyyy brahhhh 🍒
@34LILBEAN Жыл бұрын
I’m a new bike owner I would love to know where you got your graphic kit. Also can I still put a cooler kit on my 2022 Vader 125cc without the bore kit since I stay in sunny California
@34LILBEAN Жыл бұрын
I would also like to get in touch with you I’m really interested in learning and building my bike.
@freddieRODZ Жыл бұрын
77decals is the sticker kit. I mean you can put the oil cooler. It’s not gonna hurt.
@freddieRODZ Жыл бұрын
@freddierodz on IG
@purpleguy6973 7 ай бұрын
I’m new to the clones but just got one, how effective would an oil cooler be without a pump? I could definitely imagine it running like 5-10% cooler at the higher end of operating temps, but there’s no temp sensors to measure the effects accurately. Anything you’ve noticed?
@freddieRODZ 7 ай бұрын
Oil cooler would be a benefit if you running a higher compression piston. For stock 125cc. Not necessary
@purpleguy6973 7 ай бұрын
@@freddieRODZ yeh i plan on goin with the 186 and i believe 13:1+ doin cam, valves, porting, etc, if not goin the 141/143cc bbk and boosting it lol. shootin for about 22whp endgame, idk if it would be easier to run a 5hp shot or run like 2psi on a shitty ebay turbo
@lpdowning5448 Жыл бұрын
I just put a carb on mine I like that yours is facing to the right was there a special kit for that?
@freddieRODZ Жыл бұрын
Is called a spinner plate. eBay has them. Also look for a short manifold.
@lpdowning5448 Жыл бұрын
Thank you I found the spinner is the intake that came with the vm22 Carb to tall to turn it that way
@AngieD300 Жыл бұрын
You think this is something I should do to Grom? Good vid BTW
@freddieRODZ Жыл бұрын
Nah. Not until you give it more power.
@AngieD300 Жыл бұрын
@@freddieRODZ like a big bore kit, right?
@freddieRODZ Жыл бұрын
@@AngieD300 yes.
@kevinmai8555 Жыл бұрын
Where did you get the oil cooler plate?
@freddieRODZ Жыл бұрын
Which plate? Everything comes with the oil cooler. The only thing I had to make was the small plates from the frame to the oil cooler.
@t2d2420 Жыл бұрын
Did u drain oil to throw that on
@freddieRODZ Жыл бұрын
No since the front plate doesn’t hold oil.
@Shmack_ Жыл бұрын
Has it held up good?
@freddieRODZ Жыл бұрын
So far so good.
@chocolata2240 Жыл бұрын
Bro if you would have never ran that clone bike with the manufacturer oil in it you would have never blown your engine the engine did not just blow either you were low oil or you did not have the right weight to keep the engine cool your just Doing to much just buy a real Grom . You spend way to much money homie
@freddieRODZ Жыл бұрын
I never ran the bike with manufacturer oil tho. It blew the piston cuz I didn’t put enough oil. Also. I haven’t even passed $3k in the whole value 🤷♂️ I’m happy with my purchase. 👌
@chocolata2240 Жыл бұрын
Good job I'm glad you got it back to working I have the clone I had mine for 6years now never had any trouble with my engine matter of fact I still have the same carburetor that came on with it 😂 speed is 52 53 ish this year it gets a new chain new rear tire and Rear wheel bearings but it looks as new as the day I got it 6years later 2600 miles on it 👌 keep up the Awesome work Bro 👌I wish you the best ❤️
@freddieRODZ Жыл бұрын
@@chocolata2240 thanks. Mine has 5k miles and runs smooth as hell. 🫡👌
奧特羅羅 Ultraman
Рет қаралды 6 МЛН
奧特羅羅 Ultraman
Рет қаралды 6 МЛН