How I Keep My Tools Clean & Rust and Corrosion Free!

Рет қаралды 14,381

Жыл бұрын

This is how I keep my tools performing at their best, clean and free of rust and corrosion. As well as keeping cutting tools like saw blades and drill bits clean and clear of caked on wood and sap.
Featured Products and Affiliate links
Clenzoil: amzn.to/3DZPodu
Fluid Film: amzn.to/3TvLChV
WD 40 Specialist Corrosion Inhibitor: amzn.to/3WU4ee6
WD 40 Specialist Dry Lube: amzn.to/3fYKXHT
WD 40: amzn.to/3G9rmPN

Пікірлер: 28

@vikingnorm6935 4 ай бұрын

I used CLP out of curiosity, I work on & clean my firearms in my basement where a lot of my tools are, man that stuff works wonders on tools & also lasts a long time

Жыл бұрын

Good to know! I bought this week Knipex, Channellock and Klein tools. I need these tools for my guitar restring needs, around the house stuff etc...so I don't think I'll need it soon. But it's good to know. Very informative! Thanks por the post!

@robertroberts721 Жыл бұрын

Thank you for the video.

@Failsafeman100 9 ай бұрын

Off-the-shelf hairspray was recommended as an anticorrosive by a Knipex manager on the German channel Bauforum24

@andreasjonsson8075 3 ай бұрын

Good choise of tool brand

@jeffwolf8018 10 ай бұрын

I've had good success with WD-40 water specialist silicone spray in loosening up patio doors and windows.

@robertlevine2152 Жыл бұрын

Good video. You need to be aware that some lubricants will leave films on wood that impact the finishing of the wood. Fine Woodworking magazine has run a number of articles on lubricants that are good for woodworking tools. I have found that the dry lubricants both those from WD 40 and DuPont are good for door locks and hinges. They last and don't leave a mess. I have found spraying a key with the dry lube and then working the key in the lock is very effective.

@muxmurki1497 Жыл бұрын

Old German Secret: Ballistol. Universal stuff, good for weapons, tools, leather & everything. Btw: WD 40 is NOT a lubricant. It displaces water, as it is supposed to and where the name comes from: Water Displacement Formula 40. but it’s only good as first step. Afterwards it’s a good idea to use oils like Ballistol.

@ParklanCustom Жыл бұрын

Never had good luck with Ballistol, I know many people think highly of it though! Thanks for the suggestion!

@vcommandarv5916 11 ай бұрын

There is a WD-40 Specialist dry lube PTFE, it is a lubricant and it dries quickly and protects from rust, the design of the bottle was black and grey but they changes it to the original blue and yellow color scheme

@brucecaldwell6701 9 ай бұрын

Corrosion X. Pricey but effective.

@matthoffman6962 11 ай бұрын

Can you use fluid film on the handles of the tools?

@virathiyam5401 Жыл бұрын

Well 👍 done my bro.. liked.. Qs. For someone not inclined in spending on a dedicated rust prevention solution, do you suggest lightly spraying silicone spray or WD40 or coconut oil or any house hold stuffs on your new tools as a decent precautionary measure against rusting?

@ParklanCustom Жыл бұрын

Some kind of paste wax would give you the longest protection, you can use WD-40 or mineral oil, however those types of oils wear off rather quickly, so you would want to make sure to apply them frequently. Silicone base products might be a little better option.

@vcommandarv5916 11 ай бұрын

@ParklanCustom yeah mineral oil wears quickly because it doesn't dry so it basically rubs off

@kyfisher3662 Ай бұрын

what do you spray into your powertools to keep them clean?

@jeffwolf8018 10 ай бұрын

The WD in WD40 means water disbursement and this was their fortieth try. Hence WD-40

@Federico84 Жыл бұрын

I would like to try fluid film, unfortunately it is not sold in Italy

@ParklanCustom Жыл бұрын

Its really good for its purpose, but there are plenty of other options out there.

@EK99_00 7 ай бұрын

How do you clean the handle’s?

@ParklanCustom 6 ай бұрын

Handles are far easier to clean, just use some WD40.

@jeffwolf8018 10 ай бұрын

Swipe it aroused is never that bad just show some character. However when they're rusted beyond use or you need to soak them in vinegar for 3 days it's a different story. Boy does that vinegar do a good job on them.

@soundknight 11 ай бұрын

"... The number one thing..." - proceeds to mention 7 different things...

@asrulamru7255 Жыл бұрын

This is nothing new. Those commercially available materials are old story. Let me tell you how to protect your tools from rust/corrosion. All you need is a hygroscopic materials. A desiccant such as silica gel or carbon active will absorb the water from the air surrounding your tools. Try it and see for yourself which one is more effective (prevention) for corrosion. Just put a few pack of silica gel in your tool box.

@ParklanCustom Жыл бұрын

I do keep some desiccant pouches in my tool box and bags, only problem is, that won’t help you if you leave your tool outside or work in wet areas or in the rain.

@chrisz1100 Жыл бұрын

I tried this and the shop I work at had a mice problem 😂 little bastards Ate the packets and made a mess