No video
How I Make a Kitless Fountain Pen
Рет қаралды 8,397
Күн бұрынIt only takes about 187 steps! I'm not saying that it's THE way, I'm just saying it's A way.
Making a fountain pen was one of the first things that I wanted to be able to do when I began turning; reason is that it appeared complex, and it also has a very high skill cap that I am in pursuit of. There is SO much more that can go into making a fountain pen and customizing it to be just the way that you want it to be. There are some incredibly talented makers out there and I would highly suggest taking a look at their work (it's awesome). I intend on keeping down this path of fountain pens and seeing how far I can go.
Camera:
*Canon EOS M50 amzn.to/3PbrwbG
Turning Accessories Used:
*JET JWL-1221VS 12"x21" Variable-Speed Wood Lathe (719200) amzn.to/36aO0Vr
*Keyless Drill Chuck MT 2 amzn.to/43bSfeA
*Easy Wood Tools Carbide Tool Set amzn.to/3MzTTOb
*Shop Fox Dust Collector amzn.to/2VLADca
Blanks: Made in my workshop by my wife
DISCLAIMER:
My videos are for entertainment purposes only. When using any tools or heavy machinery always read and understand manufacturer's guidelines and safety recommendations. The methods I show may not be the safest way. Turning has its dangerous and you do so at your own risk.
*Links are Amazon affiliate links; we receive a small portion of each sale made through our links
@user-rc4ed8mz8i 16 күн бұрын
I was looking for this kind of video for, at least 3 years, THANK YOU SO MUCH!!! for sharing your knowledge and experience. I'm TRULLY grateful! Greetings from Poland! (Europe :D )
@maverickworkshop 16 күн бұрын
Glad you found it useful; planning on doing an update in the near future. -Jon
@norm5785 Ай бұрын
Very nicely made fountain pen. Thank you for sharing. From Henrico County Virginia
@maverickworkshop Ай бұрын
You are welcome! Glad you enjoyed it. -Jon
@Cj12sings 2 ай бұрын
Thanks so much for illuminating the process..I have done kit pens, and seen folks use taps manually on a wood lathe. The metal lathe is next level and critical for consistency and repeatability....if you do another talking about the metal lathe and tools for threading, tenon cutting would be of great interest...Awesome video thanks for showing your process...live long and prosper..
@maverickworkshop 2 ай бұрын
Hey there, I appreciate that. Some people are annoyed that I didn’t explain what I was doing 🤣. But I wasn’t trying to explain exactly what it was that I was doing…instead I was just sharing my process and the way that I do it. I have been doin live streams and I’ve really been enjoying it. So I will most likely continue doing them. I will try to be better about giving some more lead time before going live again. -Jon
@Cj12sings 2 ай бұрын
@maverickworkshop yep no problem happy you filmed your process..it is a lot of work..I have made a lot of music videos to introduce people to.playing various folk instruments... so I really appreciate your efforts
@jsibley0369 7 ай бұрын
Thank you very much I really enjoyed watching your video. I’m a designer and my father was a wood turner and I never learnt the skill. Typical teenager…. 🤔 I’m also mad about fountain pens and dream of making my own. Great music, too. A pleasure to watch.
@maverickworkshop 7 ай бұрын
Thank you! It is a very engaging task (which I like). Hope you take the time to do it someday it’s very satisfying.
@RomantiCynic 5 ай бұрын
Beautiful pen! Fascinating to watch the process. Thanks!
@maverickworkshop 5 ай бұрын
Thank you for watching. Glad you enjoyed it!
@philipeverall6 8 ай бұрын
I've never thought to use a plug cutter for making accurate tenons. Absolute game-changer! thank you sir!
@maverickworkshop 8 ай бұрын
Haha, keep it on the down low 😂 glad it helps. Took me a long time of looking around to find a simple consistent way.
@prabhakarpandey2610 3 ай бұрын
Well Explained sir.. please also plan a video for the machine and tools used in this video for making this pen
@maverickworkshop 3 ай бұрын
Thank you, is there a specific tool or machine you were wanting me to talk about? 😃 -Jon
@emiliobergasa Ай бұрын
Hermoso trabajo. Muy buenas herramientas
@maverickworkshop Ай бұрын
Thank you.
@natewarner359 5 ай бұрын
Nicely done
@maverickworkshop 5 ай бұрын
Thank you!
@Blazedandproud420 2 ай бұрын
Wow I'm so glad I found your channel hoping it grows and going to check out more of your videos! I'm a watchmaker but learned how to use a lathe for small parts and want to make bigger things like pens and chess pieces!! Really awesome stuff to see here
@maverickworkshop 2 ай бұрын
I appreciate that! A chess set would be a really challenging project to enjoy forever. Watchmaking sounds fun, you must have some good eyes and steady hands. -Jon
@cursed_to_toil Ай бұрын
Hey, Man, great Pen! Thanks for the video!! I hope to be fully kit less one day lol. However, I did notice that your finishing process is fairly tedious! Mine is also but purely out of a spirit of exchange of expertise, I am curious if you have tried the wet sanding pads that go up to around 16,000 grit? I use them on all my pens and with a good sanding technique, the only polishing I do at the end is a single application of Meguiars Ultimate Car compound. It works wonders on acrylic and reliable gives you a glass finish every time. Not to mention that the pads last forever (As long as you dont sand metal or raw wood lol) and a big bottle of meguiars is only $11, it is a very inexpensive method and outshines every other technique I have tried including the graded compounds and paper applications. Regardless though, everything about your video was a pleasant experience! Great Job Sir!!!
@maverickworkshop Ай бұрын
Thank you! I have the micro mesh pads and that goes to a very high grit. The way we do it now is buying large sheets of wet/dry sand paper and cut it to size. You are not wrong about it being tedious though. Acrylic is a harder material than most resins including the one we use, Alumilite, so it has some pros and cons as does everything. Thanks for the input. Have a good day, Jon
@HugeElvis2022 16 сағат бұрын
I’m a bit late, but just getting started with kitless pens. Did you make your own mandrels or buy them. If bought, can you add link. Thanks. Also, great video. One of the better ones I’ve seen.
@maverickworkshop 6 сағат бұрын
No worries! This is the best rabbit hole in my opinion. The ones you see that are brass are from turners warehouse. And the one for the section I made. Be sure to take a look at my live streams. -Jon
@mohangsk3759 6 ай бұрын
Very nicely done
@maverickworkshop 6 ай бұрын
Thank you.
@MaxScheler-nh6py 3 ай бұрын
Ok,I found the Video with sanding and polishing: Can you also list the sanding grits and polishing fluids please?
@maverickworkshop 3 ай бұрын
Glad you found it, there might be an upcoming video just for sanding. On pretty much all plastics I use a total of 8 grits for wet sanding from 240-2500. When it comes to wood or hybrid the process is a bit different. The polishing paste is called magic juice and it is a 6 step. -Jon
@MaxScheler-nh6py 3 ай бұрын
@@maverickworkshop Great: I‘m waiting! Thanks for answer and upcoming help 😉🤝🏻
@RJBWoodTurner 11 ай бұрын
Great job with the pen. Regards, Bob
@maverickworkshop 11 ай бұрын
Thank you very much. It means a lot coming from an accomplished pen turner like you Bob. -Jon
@RJBWoodTurner 11 ай бұрын
Don’t give me to much credit, I’m learning too. 😀
@gbapier1 7 ай бұрын
Hey maverick you just gain one new subscriber love the work you just did… I was afraid to use tap and die while lathe is running but you just change my view May I know which metal lather you using if you don’t mind me asking💪🏾👍🏾💪🏾✌🏾 Keep the good work 👍🏾👍🏾
@maverickworkshop 7 ай бұрын
Awesome! Thank you, the metal lathe I am using is a hi torque 7x16” metal lathe from little machine shop. It’s been a good machine and I have not had any issues with it in the few years I have had it but I mostly use it for resin.
@jay-in-az 5 ай бұрын
What brand metal lathe?
@maverickworkshop 5 ай бұрын
Hello there, the metal lathe is a Little Machine Shop 7350 Hitorque Mini Lathe.
@Mark_L 4 ай бұрын
Just music?
@maverickworkshop 4 ай бұрын
For this video yes, the plan was just to show my process step by step. I intend on explaining each step in the near future. Thanks for watching! -Jon
@Shortychokes 8 ай бұрын
Was that a plug cutter for you used at the 4 minute mark? First time I’ve seen that.
@maverickworkshop 8 ай бұрын
Indeed, doesn’t make it a perfect diameter but it’ll get you in the ballpark. Never seen anyone use it for that either.
@derekdd5229 10 ай бұрын
I know elapsed time is only 26 minutes but how long does it take you start to finish with this process? That metal lathe really seems to speed things up. Thanks!
@maverickworkshop 10 ай бұрын
Thanks for watching, there are definitely advantages to having a metal lathe…I started on just a wood lathe and the time difference is not huge(when you have a process). Each pen takes about 1-1.5hrs doing them one at a time, goes down a little when doing batches of 3-5. -Jon
@jen7662 10 ай бұрын
Would this be the same process is you’re making a kitless bespoke wooden fountain pen?
@maverickworkshop 10 ай бұрын
Hello, thank you for watching! When working with wood and making it kitless; wood does not thread very well with a tap and die set. The other aspect is that wood will absorb the ink and swell. For these reasons people ‘sleeve’ (line) the material, which is more complicated but a similar process. -Jon
@jen7662 10 ай бұрын
@@maverickworkshop thanks for the response. I was thinking about how well wood would be for an inkdropper…
@sajikumarsivanandan9776 10 ай бұрын
Jon, Thanks for sharing. You are a very systematic person, and have unique ways of doing things. . Btw, what is the tool you used for tenon cutting (barrel and section). -saji
@maverickworkshop 10 ай бұрын
You are welcome!! I appreciate it, there are quite a few steps to the whole process and making the process your own is something that I really enjoy about making pens. I plan on making a video going over the items I use.
@kevinzogg3331 10 ай бұрын
I would love to hear about the tooling and materials you use. Did you make your own mandrels? Thanks for the video!
@maverickworkshop 9 ай бұрын
@@kevinzogg3331 I can definitely arrange that. I hope to have a more detailed video about that in the near future. -Jon
奧特羅羅 Ultraman
Рет қаралды 6 МЛН
Process Maestro
Рет қаралды 57 М.