Thank u! Oh no yes I know now after I made this video thank you 😌

@@AnnabelLe9 hey I know this was like 5 months ago but I have a important question that I’ve been researching for weeks but I can’t find the answer to it. What do you use to coat your earrings or pins etc. after you’ve painted them and baked them. And how does it dry cause I don’t know at this point and I feel so lost. I’m nit making any clay stuff right now cause I don’t know

@@AnnabelLe9 also do you know a seal you can use that doesn’t involve a uv dryer

@@Aryyplaz hi!! I use Uv resin to coat them and then a uv lamp but you can leave them out in the sun to dry it will just take longer. If you don’t want to use resin though I know Studio Meggy talks about alternatives in her videos! Hope that helps 😊

@@AnnabelLe9 it does thx! I really love the clay items you make!

Aw thank you so much ☺️ have a great day!

Oh thank you so much!! Good luck with your earrings I hope they turn out well ☺️💛

Oh thank you so much!! Means a lot 💛💛

Thank you !! 🥰

Oh thank you!! I always hope people like the music too ☺️

Aw thank you!! 💛

Abegail Daus thank you so much!!

Oh no worries I’m so happy it helped! 🥰

Oh thank you so much! 🥰

THANK YOUU 💛

@@AnnabelLe9 ofc! keep it up ur videos are outstanding!

Thank you! Hahah yes they do 😅

Thank you!! ☺️

Thank you sm!!

Ahh thank you so much!! 🥰💛 I’m not sure the resin actually has a name but this is what it looks like you can get it heaps of places www.ebay.com.au/itm/60g-10L-UV-Epoxy-Crystal-Resin-Ultraviolet-Cure-Solar-Activated-Liquid-Silicone/114216363005?chn=ps&norover=1&mkevt=1&mkrid=705-139619-5960-0&mkcid=2&itemid=114216363005&targetid=1137570801346&device=m&mktype=pla&googleloc=9070869&campaignid=10101785243&mkgroupid=102311925060&rlsatarget=pla-1137570801346&abcId=9300368&merchantid=115486347&gclid=EAIaIQobChMI2Y_p172r7gIVC62WCh2XVQ3UEAQYAyABEgJQffD_BwE&pageci=cf9f2f06-4619-4b0d-b1bf-637f6a018701 And I use a melody Susie lamp! Hope that helps ☺️

@@AnnabelLe9 This helps tremendously! Thank you so much!

Thank you so much!! Hmm it depends maybe a few days at least but I like to work on it in bits over time 😊

Hi thank you!! I found that after a few minutes it was still a bit sticky so I leave it in just to be sure! 😊

Ah thank you sm!! I think so I’ve seen others use gloss varnishes like studiomeggy 😊

Aw thank you!! Welcome ☺️

Ahhh thank you so much!! 💛 you can cure the resin with sunlight but it will take maybe a few hours depending on how bright the sun is, I haven’t tried this but I’ve seen others do it!

Oh thank you so much!! 💛

@@AnnabelLe9 you’re welcome! 🤍

Thank you!! Yes I will 💛

agree

Thank you! I use uv resin to protect the earrings ☺️

Thank you sm!! I’m using uv resin it’s a popular brand that will come up and the lamp is a melody Susie uv lamp I’m pretty sure! Hope that helps x

@@AnnabelLe9 Thank you!!! it sure does! xx

Ahh thank you so much!!

Thank you!! I got them from eBay they’re no longer listed but they’re pretty common 😊

Hello! Hmm I haven’t had a huge problem with bubbles but rolling it out probably helps to compress it doing the same as a pasta machine, I only really sand edges and there are still some bumps but after resin it tends to go away! I hope that helps in some way 😊

Thank uuuuu 🥰💛

Dominique Souter thanks u can have

Hi thank you!! I think the largest one was about 4cm but I use the smaller ones about 3cm 😊💛 and I got them just from eBay!

Daniella Orduna thank u!! I got them from eBay, the ones I got aren’t listed anymore but they’re easy to find 😊

You could make your own flower cutters or trace a flower and make a mold out of them :D

Oh thank u! I bake for 15min at 130 degrees Celsius for sculpey clay ☺️

Thank you! I use acrylic paint 😊 good luck!

I bake them with it in it! I find it easier that way rather than trying to use glue 😊

Thank you!! I do 15min 😊

Thank you!! I use uv resin, it’s a popular brand that comes up when you search it 😊

They’re just from eBay they should be easy to look up! 💕💕

@@AnnabelLe9 Tysm :)

Hi thank you! I use acrylic and gouache paint for these

Hi yes it cures under the uv light or you can use sunlight but it will take a lot longer! ☺️

I’m using polymer clay I’ve never used paper clay before! 😊

Thank u!! I use acrylic paint 😊

Thank you!! I use sculpey polymer clay

For this clay it’s 15min! ☺️

Thank youuu!! For 15min 😊

9

Hi thank you!! I use polymer clay 😁

@@AnnabelLe9 Thank you for the quick reply!!

Thank you! I bake them for 15 min at 130 degrees Celsius 😊💛

@@AnnabelLe9 OMG THANK YOU SO MUCH! 🤍

Hi! You could use glazes instead, you can leave them out in the sun without a uv lamp but will take much longer and I use acrylic and gouache paint 😊

@@AnnabelLe9 thank you!

Thank u!! I use acrylic paint sometimes a bit of gouache mixed in, I’d say acrylic is good because it doesn’t activate with water meaning it will be fully ‘dried’ when you put resin on!

@@AnnabelLe9 thank you!

Hello! I think I did 130 degrees Celsius a low temperature, that sounds amazing I hope it all goes well 😊

@@AnnabelLe9 tysm 😊

I just got them on Etsy! I have some ceramic earrings but I’m planning on making some more!!

@@AnnabelLe9 oh okay. Tysm :D

Hi! I know StudioMeggy uses an alternative and talks about it in her videos 😊

Thank you 😇

I use sanding paper or a dremel tool! It just gets rid of any bumps so it’s nice and smooth

I’m sure you can! I know people use different glazes to finish their pieces ☺️

Hi!! I just used super glue and it’s really strong 😊

Thank you! I use sculpey 😊

I use polymer clay and then do a coat of resin on top!

I just used super glue!

I might make an updated video in the future!

Thank u!! Yes 15min at 130 degrees Celsius 😊

@@AnnabelLe9 thank you so much I hope mine can be cute too!

@@Jay-cr3qc good luck!! I’m sure they will be 😁

Hmm I haven’t tried that but it might work as long as it doesn’t react badly with the paint!

Hi! I use polymer clay which you bake, but I’ve seen people use air dry clay as well 😊

@@AnnabelLe9 thank u so much!❤️

Thank you!! I use uv resin like this one www.etsy.com/au/listing/587576623/clear-transparent-uv-resin?gpla=1&gao=1&&Supplies&EAIaIQobChMIs8PVpdmS7gIVKcEWBR2LwA0KEAQYBiABEgIURfD_BwE_k_&gclid=EAIaIQobChMIs8PVpdmS7gIVKcEWBR2LwA0KEAQYBiABEgIURfD_BwE But you can find it from lots of sellers!

Thank u!! I probably wouldn’t recommend it but it’s just generic I didn’t specifically look it up or anything, I’m trying out E6000 industrial glue now 😊

I used sculpey clay ☺️

I just applied more resin onto the back before putting it back in if that’s what you were referring to! 😊

I use uv resin to protect it 😊

Since they’re covered in resin they’re pretty much waterproof!

I use acrylic and gouache paint!

Hi yes it is! I use sculpey 😊

I use polymer clay! 😊

@@AnnabelLe9 thank you🤩

I’m using acrylic and gouache paint ☺️

@@AnnabelLe9 an angel!!! ❤️ thank you. Your work is breath taking. I’m very poor so I can’t buy real stones so I want to see if I can make faux stones lol

@@isychia4947 no worries! Oh thank you I hope that it turns out well 😊

There’s no brand name but if you search uv resin it’s the one with a leaf pattern it’s very common!