No video
How I make over 270HP in my RSX
Рет қаралды 53,902
Күн бұрынLearn from me and go out and build yourself a beast! If I left anything out drop your question in the comments!
My Instagram! / sergmotive_garage
@HarisRazzaq 3 жыл бұрын
I drive a 04 RSX type S. Made 241 whp and 166 torque on a dynojet. Pump gas, stock bottom end stage 2 cams. I actually used your head removal and head install tutorials to help me install my built head and cams. I really appreciate all the good work you contribute to this community. I can't have done half the stuff I did to my motor without this channel
@zahkarii7933 3 жыл бұрын
I have recently bought a 04 RSX type S as well and am new to all this. So all you did was swap the cams and thats it?
@andre_dc543 3 жыл бұрын
kzfaq.info/get/bejne/nr9lg8WT1J6Xe4E.html
@andre_dc543 3 жыл бұрын
@@zahkarii7933
@algaleassi3133 2 жыл бұрын
@@andre_dc543 aza.
@yukonstriker1703 8 ай бұрын
Track times?
@rdbit8465 3 жыл бұрын
So I've been following you for about 9 months. Needless to say alot of your videos and tips help my build make 267hp and 204tq on 93 pump gas. Thanks for the tips and awesome videos. Keep up the great work. The RSX is looking great.
@eduardo138879 2 жыл бұрын
stock bottom end?
@mdxdudejp6046 3 жыл бұрын
I wass retired from the Honda game for more than 10 years and I’m thinking verry much that I’m going back 🤦🏻♂️ but obviously K series🙌🏻
@SERGMOTIVEGARAGE 3 жыл бұрын
come back!!
@alitoroganan2442 3 жыл бұрын
I'm on the same boat, if only an ej207 can rev as high like hondas anf and scream like a honda lol
@NinaMango789 3 жыл бұрын
@@alitoroganan2442 they're pretty revvy for an ej, still nothing like a 4g or 3sgte though
@JonHop1 3 жыл бұрын
Good luck finding a clean Type S tho.. I feel like clean Type S's are gonna skyrocket in price in the near future. I have already had offers of 13k for mine.. 90K original miles on the body, K20/24, built PPG helical trans with Quaife lsd, and some Fortune auto 500 coils. Super clean. Its weird but my favorite mod on the car is my new Acuity 4-way shifter with the full Acuity shift package(detents, selector springs, cable bushings).. It is one of the best shifting Manual cars I have ever driven, and it is paired with a CM FX300 clutch and a CM/Wilwood Hydraulic release bearing that deletes the slave. The shifts are so butter smooth and engagement is just insanely good. Makes 262/215.
@looneyyang1326 3 жыл бұрын
Same happened to me. I now have a 97 ek9 / k24a2
@IdrisFashan 3 жыл бұрын
Love your stuff. Got the tip from you about the ported oil pump for my k24z3 TSX... waiting on that and my ported head and new valve train-hopefully next month! Right now I got 12.5:1 compression, skunk2 header, lightweight flywheel, hondata flashpro, cat and resonator delete, cold air intake. Dreaming of 300HP... fingers crossed.
@shlattwidow3109 3 ай бұрын
What’d you get
@OroDC5 15 күн бұрын
Did you reach 300hp?
@everythingcrypto5577 2 жыл бұрын
More than a decade later, this car is still looking good and has many potentials
@va2_lee 3 жыл бұрын
Found this channel when I still drove my auto TSX. Let that car go and currently driving an 04 TL 6MT w/ I/E/J-Pipe/PCD mods! I thought about getting the RSX Type-S at one point too!
@jdm_obsession 3 жыл бұрын
Just picked up a 02 rsx type s with k24a2 and 6 speed for $1500 first acura iv owned now I'm hooked
@otsmalls1580 3 жыл бұрын
Sigh I miss my rsx...been contemplating getting another one. Keep it n/a bro. Respect
@worldtraveler8613 3 жыл бұрын
I have had my rsx-s for 11 years. I have got a lot of great info on the platform from this channel. Still haven't built the motor but cosmetics are on point trust me lol. Motor build coming soon
@SERGMOTIVEGARAGE 3 жыл бұрын
im glad I was able to help!
@OxNefu 2 ай бұрын
that's some good power numbers you were able to make, I have a 04 rsx build im starting on seeing this video helps me a lot
@obgbeto 3 жыл бұрын
That stock has been holding you back, sell the ultra and get your head ported and just slap the rbc on there, you’ll make more power for sure. Diymike did a frank with stock everything just hand ported head and rbc and they are close to hitting 300whp, they dynoed and they were making 286whp at 7k rpm on a mustang dyno. There’s a guy who posted on the rsx page he was running 12.5.1 comp with a 4 piston head and k20a2 cams on a ported rbc claiming he might be close to 300whp and fastest time was 12.3 on the quarter mile.
@jeremywatts2768 3 жыл бұрын
“It's not the car you drive. It's the driver who's driving the car that's doing the driving.” -Vin Serento
@xxfilthydxx1273 3 жыл бұрын
I've been beating myself since Jr high !!!
@chrisbailey5047 3 жыл бұрын
Your videos are always great, dude. I built my own K20 based purely off of everything you've done. (K24 bottom end on the next one!) Keep up the good work! Question, do you think cams are worth it or have there been any drawbacks in terms of longevity or maintenance?
@SERGMOTIVEGARAGE 3 жыл бұрын
Thats awesome!! Im glad the videos are a big help for you! Cams are deff worth it, no drawbacks in my opinion unless you go with a extremely aggressive cam
@sergioricardofigueroamanzo6527 3 жыл бұрын
Ponle subtítulos en ESPAÑOL. SERIA GENIAL. SALUDOS DESDE MICHOACÁN MÉXICO 🤗🤗🤗🤗🤗🤗.
@larryher1 3 жыл бұрын
You forgot to mention that you’re not running a liter spacer on the manifold, presuming it’s just the 3.5L manifold. I get that question a lot if the 1 or 2 liter spacer actually helps or not. Other than that, everything is nicely cover! Thank You Serg for the break down build! Really helps!
@SinisterBlackShadow 2 жыл бұрын
Oy, thanks for the video man. Its good to see what it takes to get N/A at that level.
@DevonFurderer 3 жыл бұрын
Been following for a while and love the car mand. I practically did the same build over the last 2 years except 11:1 arias pistons, polished head, ported and polished RBC, 70mm Hybrid TB and a ferrea valvetrain. Somehow only made 218whp. It's now blown up due to the machine shop butchering my pistons. Now using my stock k20a2 with bolt ons making 225whp.
@kallday4584 3 жыл бұрын
Good stuff man long time subscriber. Glad to see you hit 20k. Keep grinding 💪 💯
@SERGMOTIVEGARAGE 3 жыл бұрын
Thanks for sticking around!
@wilfk8664 3 жыл бұрын
Dc5 looking amazing!! Can't wait to finish mine.
@ramonclemons8196 2 жыл бұрын
06 RSX base bruh.. your my professor g. I currently have a stuck or bent valve. I'm disassembling the head, valve cover bolts are hard as HELL to get to. Low key think I just stripped the top bolt by the VTEC thang in back.
@jacobhauenstein 2 жыл бұрын
i want to get one of these one day but that much work for 2xx hp seems insane. I guess it's about the build and extracting as much as you can from it? Don't get me wrong, that kind of power NA on that fueling is impressive, but definitely costs $$$$
@adriengoesthroughcarslikecandy 3 жыл бұрын
Digging your videos. Got a 2003 acura rsx type s. K20a2. Starting to take apart this week in fact. She needs tlc so starting from the beginning. Started watching your vids to get a bit of an idea where and what I'm going to do to it😅🤷
@chriswheeler5150 Жыл бұрын
Time to boost for the channel!
@jrsanchez800 2 жыл бұрын
Sup bro. Have a question... Does your Skunk2 ultra intake monifold have the same flow as the RBC ported?
@YanniEhm 2 жыл бұрын
That is a sexy and pretty-looking motor. Well done.
@leewillus Жыл бұрын
I drive Civics stock with 50 dry shot nitrous. Spray the same in my other K and 150 shot in my 355 SBC and its all slow af except the K
@hectorrojas9673 3 жыл бұрын
I wanna see pulls or compilation of you at the track
@SERGMOTIVEGARAGE 3 жыл бұрын
got you 👍
@menor5277 3 жыл бұрын
the best video 👌🏻💪🏻where did you buy the strut bar
@davidsandoval6821 3 жыл бұрын
I just got my RSX 3 months ago . I can’t wait to get it to atleast 250hp . I already got few bolts ons . You in Cali ?
@Umadbro1225 3 жыл бұрын
New to the channel drive a 07 civic si wanna build it to be all motor monster the video definitely helped
@adamwoolwich2411 Жыл бұрын
Love watching your technical videos. I have a 2003 ep3 sir with a k20a2 and 6 speed. Bone stock about to get kpro and wondering what parts I should add to supliment that?
@mdxdudejp6046 3 жыл бұрын
Can u do a description list in the comments I would really appreciate that’s buddy ! Thanks and great Chanel keep up the good content its very healp full
@highthai7 3 жыл бұрын
Keep doing your thing Serg!💯
@mikelarocque4221 3 ай бұрын
How much money and time was it for the extra 110 to 115 hp? I have a base and very interested to say the least. Nice car!!!
@iliasmetalworks Жыл бұрын
Golden video!
@rmensah453 3 жыл бұрын
Rsx gang checking in! 💪🏾
@Zxqlo 3 жыл бұрын
Me an RSX owner scrolling KZfaq KZfaq Algorithm: 😏
@PLK123 3 жыл бұрын
ill trade you 82 pence for k20
@s550andrew 3 жыл бұрын
Thank you for the diy videos
@MilburnMotorsports 3 жыл бұрын
270 to the motor or to the wheels? Either way, great job! Im currently making 245whp on my k24 swap RSX USTCC Car, it feels excellent!
@carlosflores6646 3 жыл бұрын
Recently made 249 WHP & 170 TQ Surprise I made this number but satisfied Stock K20Z1 internal wise top to bottom Stock fuel system All I did was Ktuned Header, 3” Ktuned Exhaust RBC portmatched TB to Ktuned 72 mm TB with a custom 3” intake Goal is to be 300-350 N/A one day man. But need that internal work.
@BigJohn_S117 Жыл бұрын
249 👀 That's the highest I've heard of on a stock K20. 170 WTQ out of a 2.0. Crazy
@Jo3harker Жыл бұрын
@@BigJohn_S117 My k20a2 is making 280 on stock internals NA and javi tune
@eljefebullycamp 3 жыл бұрын
Do you have a mod list
@SATX_Bearded_Realtor 3 жыл бұрын
Great information bro!! Gracias!!!
@freddygeez4646 3 жыл бұрын
I really like the sk2 intake currently have a stock port rbc but might just get it ported since I still have a.c and p.s ...what t.b are you running? I wish hybrid still made the one with cruise js
@remybautistalee6811 3 жыл бұрын
I have a 2006 Acura RSX Type-S and it’s completely stock. Within a week of getting it, I noticed that when I shift into 4th gear, it grinds for a moment before shifting in, and it grinds when I go into reverse sometimes. I’m guessing it’s my synchronizers but I’m not completely sure.
@SinisterBlackShadow Жыл бұрын
Hey did you notice any significant change in vibration in the car/engine after taking the balance shaft pump out for the k20 pump? I imagine there would be but I'm looking to get what others have experienced on that matter.
@javion43 3 жыл бұрын
Great video bro
@hnnngv 3 жыл бұрын
Hey bro, was wondering if you ever had the stock strut bar on with the frank build in it, I got a DC5R with a frank build and recently had to take off the stock strut bar because it was rubbing against the rocker cover. Now I got a tiny hole on the top left of the cover and its leaking oil(very small leak). Gonna have to JB weld it until I purchase a new one. Also would like to say I'm new to your channel and your frank build video's have given me soo much insight and I would like to thank you in advance! cheers~
@SERGMOTIVEGARAGE 3 жыл бұрын
nah I havent used the stock strut bar in years lol
@hnnngv 3 жыл бұрын
@@SERGMOTIVEGARAGE ah ns, what fluids do you run ? Specifically brake and clutch, and engine oil.
@eugeneevangelista5135 3 жыл бұрын
I’m following your K20/K24 build, got the parts already and would like to ask if anything in the engine fail? Thanks.
@Prowlgmail 3 жыл бұрын
One things I notice even with a stock accord is that you get wheel hop. Lol.
@dannylongstreth4868 Жыл бұрын
I have to ask been looking for a black OEM dip stick for my k20z1 what dip stick or part number did u use
@kseries20-24only 2 жыл бұрын
@Sergmotive Garage What are you doing for engine management? Do you add the tune yourself?
@2drrsx Жыл бұрын
Hey I was jw if you had a k24a2 tsx block and you wanted to do the same setup as you already did. Would you only upgrade the pistions and leave the stock rods or would you still have to upgrade both? And why?
@junaidjunu1879 3 жыл бұрын
What made you go with the prayoonto cams instead of the DC
@SERGMOTIVEGARAGE 3 жыл бұрын
wasn't as informed back in the day when I made the purchase and wanted to try something different.
@josemaldonado9044 3 жыл бұрын
How can i fit my injen cold air intake with my skunk2 ultra street series manifold with a skunk2 RBC/PRB TB adapter with a 72MM TB from ktuned any recommendations???
@angelarriaga3696 3 жыл бұрын
Hey man awesome videos. Have you had any issues with passing emissions or anything?
@alexm8406 Жыл бұрын
Bro.
@icasualyt8875 Жыл бұрын
Supposedly running a valve cover breather is bad, is that true ?
@jetsiel8885 3 жыл бұрын
Just let go of my fa5 kinda miss it but new things coming getting into drifting just don’t know what car to pick for it
@domingogonzalez7336 3 жыл бұрын
Nice engine setup bro...
@noscopeep3985 3 жыл бұрын
Definitely subscribe
@jimmyscivicEP3 2 жыл бұрын
what you do about pvc.?? free flow or remove it completely.?
@RealKyn 10 ай бұрын
i just got a ‘04 rsx
@billybear6850 Ай бұрын
What size serpentine belt?
@axsb 3 жыл бұрын
did you limit the rbc 50 vtc?
@gpdub2028 3 жыл бұрын
x2
@richardmacias4463 3 жыл бұрын
I also have a similar setup k20a2/k24a1 did not limit the vtc50 but the only time it's at 50vtc is at exactly 5k rpm. Otherwise it's below 50
@dcartwright8991 3 жыл бұрын
Nice setup bro our setup is almost similar
@michaelac720 3 жыл бұрын
Bro why u gotta tell me about all this stuff. Now I’m adding more things to the list of car parts 😂 my car is pretty stock rn but in the spring I’m planning on putting on Tein Flex Z
@NLong16992 3 жыл бұрын
I have an 03 RSX Type S. I have been thinking about either putting a Kraftwerks supercharger kit with a rotrex c38 supercharger or doing a k24a2 bottom end with my k20a2 head. Which do you think would be better for a reliable/semi reliable build? 300-350 whp is my goal.
@SERGMOTIVEGARAGE 3 жыл бұрын
i'd put the supercharger on it, it will be more cost effective to reach your hp goal. To try and make 300-350 in a N/A motor on pump gas will cost you double.
@NLong16992 3 жыл бұрын
@@SERGMOTIVEGARAGE thank you. Its nice to get an opinion from someone experienced
@user-nc5yk4ng3g Жыл бұрын
Hello Sergio !! Stock trasmission ?
@tonylee7825 3 жыл бұрын
Would k20a2 insane shafts fit in your k20/k24 swap? Or would you have to switch to the k24 axles? Thanks Sergmotive
@averyalexander2303 2 жыл бұрын
It's the same, the K24 swap doesn't change anything about the axles.
@user-nc5yk4ng3g Жыл бұрын
06 rsx type s k20z1 come with LSD OEM ? ?
@jessesvlogs4761 3 жыл бұрын
Where is a reliable site to buy a seibon carbon fiber hood and wing
@yolandacolby 3 жыл бұрын
I have a question is it possible to put a rsx motor in a rsx type s body?
@martilloelduro5682 3 жыл бұрын
I have a k24a2 engine that blows blue smoke only at start up or when it idles. I suspect that it’s the valve seals. Do you have experience on replacing them?
@IaintTrynaGoOutLikeBIGnPAC 3 жыл бұрын
Need your head rebuilt. Most likely your valve guides are leaking.
@jordanowens5455 2 жыл бұрын
so i can start with my base rsx and get a pretty good car out of it?
@jessejzRsx 3 жыл бұрын
Why dont you add nitrous to your set up?
@s550andrew 3 жыл бұрын
I used to drive an ecoboost but it blew up two times so now if I’m gonna blow something up it’s going to be my fault haha
@evmok7080 3 жыл бұрын
Does that stock sway bar work with the ktuned k24 header
@vipereagle7446 3 жыл бұрын
Second gen crv 5speed. K24a2 swap
@rsxboys5393 3 жыл бұрын
You cud use a head gasket space
@kevinchi6096 2 жыл бұрын
what ECU you use for this engine set up?
@Allmotor- 3 жыл бұрын
How does it feels with the 7.6 final drive! Compared to the 4.3? 💪🏼 thanks for your info
@SERGMOTIVEGARAGE 3 жыл бұрын
I haven't beat the car too hard yet, but on the highway doing 60-70 im at about 3500-4000 RPMS so it's alittle annoying there lol
@gpdub2028 3 жыл бұрын
@@SERGMOTIVEGARAGE Thanks for the vid! Super helpful and motivating. is that RPM at 6th gear? Are you on lightened flywheel as well? Thanks agin
@Allmotor- 3 жыл бұрын
@@SERGMOTIVEGARAGE tsx 6 gear to lower the rpms bro 😎 nice!
@paulcollingwood2059 3 жыл бұрын
what is your opinion on the detent and shifter springs thinking of these for my for my k20a race car
@pyroboobysmith359 3 жыл бұрын
I put both kits on mine and it makes it feel like brand new, crisp, no slop.
@SERGMOTIVEGARAGE 3 жыл бұрын
@@pyroboobysmith359 shifter springs was one of the best mods I did, the detent springs make it feel slightly stiffer when putting into a gear. For the price of both you cant go wrong.
@chriswheeler5150 Жыл бұрын
Are those headlights stock?
@obgbeto 3 жыл бұрын
Why you go 4.7 final drive? Are you not losing traction on lower gears? You upgrade to 9th gen 6th gear?
@SERGMOTIVEGARAGE 3 жыл бұрын
the 4.7 will increase my acceleration by shortening my gears, did it so I can hit 11's at the track
@ronaldmason8140 2 жыл бұрын
How hard would in to K20 into my 99 Mitsubishi Eclipse
@realrichtm6019 2 жыл бұрын
Wanna c some more fa5 stuff👀👀
@alitoroganan2442 3 жыл бұрын
dude what's the color code of the wheels, wait is it an apple red?
@pablosantiago2357 3 жыл бұрын
What head gasket and timing u use
@JUANP973 3 жыл бұрын
Hey bro love the channel. Im in jersey but i have to ask will you be willing to rebuild my engine? If so how can I contact you to chat about it thanks for your time.
@JUANP973 3 жыл бұрын
K20z3 8th gen si
@lokheileung9084 3 жыл бұрын
Did u pull out the abs pump ? My type s got the pump next to the engine mount
@SERGMOTIVEGARAGE 3 жыл бұрын
yea i deleted the abs
@reggieleomelendez 3 жыл бұрын
What I want to see is F 20c motor in a rsx
@ayaanhashmi7161 Жыл бұрын
Stock throttle body?
@fa5jay804 Жыл бұрын
So you made 281 on pump gas?
@xckj3776 3 жыл бұрын
Did you delete the power steering? I didn’t see it
@SERGMOTIVEGARAGE 3 жыл бұрын
deleted the power steering and now im running electric steering
@TovarischBinkov 2 жыл бұрын
Any suggestions for someone with a base an a stock a3
@SERGMOTIVEGARAGE 2 жыл бұрын
turbo kit on low boost or k24 swap
@Without_Limit_Auto 3 жыл бұрын
How fast 100-200 kmph?
@pyroboobysmith359 3 жыл бұрын
Are you running the stock front sway bar with the k24 header?
@SERGMOTIVEGARAGE 3 жыл бұрын
im using the em2 front sway bar
@IaintTrynaGoOutLikeBIGnPAC 3 жыл бұрын
Stock rsx bar won't work
@ahs9583 3 жыл бұрын
Are u from Florida?
@JonHop1 3 жыл бұрын
I feel like 270 is low for this setup.. Im making 262/215 on a stock JDM K24A bottom end and a K20z1 head with basic Supertech Valvetrain upgrade and DC2.2 cams. I am running a ported RBC with 70mm TB, custom 3.5inch CAI, and a Custom Kteller 3 inch exhaust with ASP Header.
@Without_Limit_Auto 3 жыл бұрын
What's the injectors load at 8900 rpm?
@SERGMOTIVEGARAGE 3 жыл бұрын
no idea, my tuner knows all that.
@Without_Limit_Auto 3 жыл бұрын
@@SERGMOTIVEGARAGE I just want to compare, I have about 320-325 whp.
@ALYangRSX 3 жыл бұрын
You’re staying pump gas? Why not switch over to 🌽?
@SERGMOTIVEGARAGE 3 жыл бұрын
pump is easier for me to obtain in my area
I Do Cars
Рет қаралды 198 М.
Tyrone LaFlare
Рет қаралды 6 М.