How I Restored The Underside (on a budget) E46 330ci

Рет қаралды 5,395

7 ай бұрын

Here we take apart, clean, paint and restore the entire front suspension of my E46 330ci.
Alot of parts are cleaned, and painted and some replaced.
Part numbers used
2x Brake brackets 34116750159
ABS sensor right 34526792896
ABS sensor left 34526792897
2x ABS screw 07129905386
Bolt for hub/shock 31306779487 x2
2x pr side Bolts for brake pad carrier 34116772428
2x Wheel Bearings 31226757024 (i used the fag version)
2x ARB bushing 33556751269 (i used the meyle version)
2x Front brake hoses 83.6152-0406.3 ATE
2x Front Brake Discs 24.0125-0138.1 ATE
Brake pad set 13.0470-7155.2 ATE
2x Caliper rebuild kits 8170205728 Triscan
2x Brake hose holder 34341163565
Brake pad wear sensor 34356751311
Trailing arm bolts. pr side 1x 31106774714, 2x33306760652 1x32216769539

Пікірлер: 75

@sixpotbelly 7 ай бұрын

Enjoyed that. I enjoy seeing maintenance and restoration videos like these over mods 👍

@OEMplusRESTO 7 ай бұрын

I like making things look good again:-) thank you for the support:)

@maxsss03 3 ай бұрын

This guy is truly amazing, should have more subs for sure

@andrewachholz7922 7 ай бұрын

Great video again. I particular enjoy your attempt to restore as much as possible. that's the name of the game.

@OEMplusRESTO 7 ай бұрын

Thank you very much!

@Dennis_wl 2 ай бұрын

Really enjoyed the restoring part! With good DIY tips love to see this more

@OEMplusRESTO 2 ай бұрын

Thank you.

@neilcarlile63 3 ай бұрын

Your methodical and professional approach is wonderful. I would appreciate both maintenance and modifications. I have a 2003 E46 M3 Convertible. I have had no experience with mechanics, but am now fascinated and want to maintain my BMer myself. Keep up the great work.

@OEMplusRESTO 3 ай бұрын

Thank you. That was very nice of you to say. Your car is one of my dream cars. Hope you have a nice day

@mohh2kong 2 ай бұрын

Love your garage, love the video. Fantastic work!

@OEMplusRESTO 2 ай бұрын

Thank you for the support and kind words

@Hawk....... 7 ай бұрын

Damn dude!! You know what you are doing.. Great work 👌🏼

@sjjvddyumiherhv3709 7 ай бұрын

man brilliant video , I watched this whole video at 2:30 am and it was a blast i love this type of videos of restoration

@OEMplusRESTO 7 ай бұрын

Thats all i could hope for. Thank you very much for the support😎

@YootubeUK 7 ай бұрын

Very nice! Always feels satisfying cleaning, detailing, repainting and replacing the underside of a car. Sending BMW coupe love!

@darioc.4414 7 ай бұрын

I've watched so far a few of your videos -> thumbs up! Just continue to do videos like this and all the earlier ones, it's a good mix of maintenance work and mods testing. Cheers

@OEMplusRESTO 7 ай бұрын

Thank you. I will keep doing that:)

@MichTuning 7 ай бұрын

you're crazy man. Gorgeous job, this is a true restoration, I would never put the bmw on the road again lol

@robertjackson7377 7 ай бұрын

Another great video. Mods would be great. Even maintenance jobs. You need a nickname from your followers. “Gutten Tight”, “The Master”, “The Expert”! Something good and funny though. You not only teach and show us things, you have a great sense of humor. Thank you again for your videos. 👍

@OEMplusRESTO 7 ай бұрын

Thank you for supporting me sir❤️ i guess you could call me “timmay”’like that guy from south park🤣

@robertjackson7377 7 ай бұрын

😂😂😂that is a great one “Timmay”. You truly are a Master. I would enjoy seeing how you redo an interior in the future. Well anything you do is awesome and I have learned so much. Thank you 👍🙂

@metomihailov4369 6 ай бұрын

Thanks for sharing all this knowledge for free! Rarely do i comment a video in here, but this one is worth it! P.s Not sure why i think you are dane, but if you are, it makes sense for the quality work!

@OEMplusRESTO 6 ай бұрын

Yes im a dane. Thank you for the kind words😎

@michaelblacktree 7 ай бұрын

That looks great! 👍 BTW, I would be interested in the intake test.

@OEMplusRESTO 7 ай бұрын

I think were gonna do that next. Its a quick easy video to do so before i tesr apart the interior we’ll try a few mods again:)

@christophervillarrealdelao1177 6 ай бұрын

Oh yeah I definitely like the gutten tight ... Nick name for sure

@minski6474 3 ай бұрын

I love your towels, my wife doesn't want to give me any!

@OEMplusRESTO 3 ай бұрын

Do like me and sneak them out😅

@thxomas 7 ай бұрын

Love it! Like a Danish Sreten ;)

@gunter6435 7 ай бұрын

So glad I found this channel. Really enjoying your work Tim, keep it up 👍 Interested in seeing testing of those strut bars.

@OEMplusRESTO 7 ай бұрын

Thank you, im glad you found it. Braces will be in a month or so combined with air intakes and stainless stell braided brake lines and maybe other stuff. But for now, due to weather and costs, im redoing the interior:)

@gunter6435 7 ай бұрын

Superb. My car need interior rework as well, so that’s perfect👌

@OEMplusRESTO 7 ай бұрын

@@gunter6435 sounds good:) are you german by chance? One of the most skilled guys i have met was a german named gunter lol.

@gunter6435 7 ай бұрын

My name is not gunter, nor am I German or skilled xD Norwegian her. I can only imagine the power of a true Gunther

@OEMplusRESTO 7 ай бұрын

@gunter6435 sorry about that my fellow viking

@DMartCHS 7 ай бұрын

Great view! Side note if you want to cut down on brake dust then you need to get Akebonos

@OEMplusRESTO 7 ай бұрын

Thank you for the tip

@coffeelover5827 7 ай бұрын

So satisfying to watch. You got yourself a new subscriber here !

@OEMplusRESTO 7 ай бұрын

Thank you:-)

@TOTALdAk1nG 7 ай бұрын

Absolute stunning work! The car looks incredible :) Ever considered using Mike Sanders to sustain deep rust protection? As always very high quality video! Cant wait for new ones :) Keep it up!!

@OEMplusRESTO 7 ай бұрын

Thanks for the support. I didnt know about that paint. Is it good or better?

@TOTALdAk1nG 7 ай бұрын

@@OEMplusRESTO mike sanders is fat for the inside of the chassis :) its like wax but will creep into deep spots to reduce Rust Building

@dRew-something 3 ай бұрын

Brilliant, detailed video.. extremely helpful. I've always wanted to do this to mine. I'm trying to do small bits at the moment but would one day hope to do a full restoration as you have done. Great video 👍 I have an e46 325ci 2 door. How much of a difference has all this made to the feel of your car? Are you planning on doing anything to the engine too? More maintenance and mods videos please.

@iain4853 7 ай бұрын

An interior restore would be great Tim. But I think oem is best myself. Keep up the good work. I aim to do a front end tidy up on mine over Xmas. Weather permitting 😊

@OEMplusRESTO 7 ай бұрын

Thank you. Is it freezing cold where you live as well?? Im freezing my ass off in the garage lately. 5degress celcius inside. But no wind so as long as you keep going its not super cold

@iain4853 7 ай бұрын

@@OEMplusRESTO yes it’s 5 deg here in southern England. Set to get colder too. If it pisses down all Xmas I’ll do the interior clean and redye steering wheel too.

@OEMplusRESTO 7 ай бұрын

@@iain4853 i hope youre as lucky as i am when it comes to re-using parts. Sometimes especially those inner fenders just comes apart from age! Make sure you have a little heat if you want to paint something along the way. The cold makes it take forever to dry fully🥲 and diesel works really well for cleaning the sticky substance off we danes and brits spray all over our cars😅

@JP-zo4nr 7 ай бұрын

Amazing job, I like seeing the restoration and maintenance work. Have you thought about cavity waxing the car and also checking the conditions of sills under the side skirts?

@OEMplusRESTO 7 ай бұрын

Thank you:) i have had the sills off and it looks fine. But i have a video planned 1 or 2 vidoes down the line where i remove them and paint/protect under the sills and the rear aches. Have done the rear before but painted them black. But i like the oe style volor vetter so will redo them while doing sills. And brakes in the rear. But right now im busy with the interior video. Lots of stuff to be done lol

@oscararnesen699 7 ай бұрын

Fantastisk som altid Tim, glæder mig endnu mere til at sommer Cruise sammen til sommer!!

@samisvideo 7 ай бұрын

Looks like new :) Great work!

@e30_318is_project 7 ай бұрын

Looking very good! Nice work. Are you also still working on the muscle car ?

@OEMplusRESTO 7 ай бұрын

Thank you, No not at the moment:) too busy

@christophervillarrealdelao1177 6 ай бұрын

I have a e46 330xi 2004 I absolutely love it as I've done All the engine overhaul that you have done... I can't stop watching your videos 🤟🏾. Why don't you do next video on your gasket for your spark plugs or I'm also having a problem with my sunroof I wanted the channels that keeps getting jammed and I don't know what to do about it..

@OEMplusRESTO 6 ай бұрын

Thank you for the kind words. Im in the middle of a lowering spring comparison video but once that is done i’ll ask my subscribers what they want next. One of the two options for the next video has sparkplug gaskets involved in the repair as well. So either it will be soon oe very soon lol.

@OEMplusRESTO 6 ай бұрын

Im no expert on the sunroof part but in my interior makeover vid i take it apart and clean the tracks. Sadly in the video i dont show it, but if you run the sunroff mechanism back after removing the sunroof you get access to the tracks and can do a proper clean as well. Id start there if i were you:)

@ivanfilipovic3296 7 ай бұрын

any plans to put some brace in trunk to connect subframe mount points to frame rails or strut towers? like to prevent cracking if you plan to drive it hard

@OEMplusRESTO 7 ай бұрын

Next video will probably be a strut tower brace front and rear, and a few other mods as well. But im not planning on the cool stuff m539 for instance installed in his e46 touring. I simply wont be using the car on a racetrack so i doesnt make much sense to go that far

@ivanfilipovic3296 7 ай бұрын

nice, from what has been seen your e46 is quite tidy and still in one piece, external spotwelds look nice, i like "budget" theme of putting money where it matters unlike USA/western e46 guys when they go ocd overboard with builds, gets bit boring as everyone does the same thing... my 330ci is east european europoor spec and i had cut bootfloor a bit and put 60x40mm steel tube to connect rear subframe to frame rails, my friend stole material in steel mill so all expense was co2 gas, weld wire and paint prep material, if you know how to fabricate... @@OEMplusRESTO

@bull7618 7 ай бұрын

Sensational video. Did you order all the replacement brackets and tabs off of bmw or aftermarket? Also yes to the interior overhaul as that’s my next project

@OEMplusRESTO 7 ай бұрын

You just reminded me to upload all part numbers used so thank you:) Check back in 30minutes for part numbers:-) both oe and aftermarket parts.

@OEMplusRESTO 7 ай бұрын

And thanks for the kind words:) i have updated the desciption now with every part that i used

@bull7618 7 ай бұрын

@@OEMplusRESTO amazing thank you! Keep up the good work. There’s a market for this level of restoration work on KZfaq. Nothing left undone

@christophervillarrealdelao1177 6 ай бұрын

I also I'm having problems I'm getting the trifecta lights on my dash but I replaced all ABS sensors and I'm still getting them I don't know what to do you think maybe someone's telling me that if I did a steering angle sensor relearn it that I could get rid of them

@OEMplusRESTO 6 ай бұрын

Hi. To get a better idea what your issue is can you hook up a scanner/code reader? Otherwise your kindda fighting in the dark when it comes to the trifecta

@gustavopeiterbatschauer5835 7 ай бұрын

what kind of paint did you use ? Ordinary auto paint ?

@OEMplusRESTO 7 ай бұрын

Hi. I used Hammerite. Its super great both as a spray and for paint brush’s but ive been told they lately have changed the formula so youd might want to look into if there are better options if you plan on driving it in thw winter. But for summeruse and the occasional rain hammerite is fine

@leored79 Ай бұрын

Seems that you do not need that bmw Tool for the front hub bearing installation (a metal tube you screw onto the end of the stub axle, then slide the bearing on...)?

@OEMplusRESTO Ай бұрын

I dont known thar tool in particular:/

@leored79 Ай бұрын

I also have a question - did you look into the benefits / non benefits of fitting a strut brace at the front/back? Effects before /after..

@OEMplusRESTO Ай бұрын

@leored79 yes i have a vid on that very recently. Cheap upgrades

@mattyboy0293 7 ай бұрын

How come you didn't upgrade to stainless steel brake lines ?

@OEMplusRESTO 7 ай бұрын

Good question. 2 reasons. 1 im kindda broke right now 2 id like to do a comparison. And i dont like to compare old vs steel brake lines. Using new rubber ones make it so i can compare “new” vs steel for inna few vidoes:)