How I Sharpen My Hand Tools & Making a Sharpening Stone Jig

Рет қаралды 448,048

3 жыл бұрын

I just got some new hand planes so I figured it was a good time to make a video on my sharpening process!
All the chisels and planes I used in this video are from Woodcraft, they have been great for me and I can't wait to put the new ones to good use! You can find them here -
3-IN-ONE Multi-Purpose Oil is a versatile formula that cleans off grime, lubricates moving parts, penetrates rust, and protects tools and equipment. The Marksman Spout comes in handy when precise control is required. Its on-and-off twist tip will help you avoid unwanted spilling, and leaking; and its clear product fill indicator will tell you when you're running low. Now, you can clean, lubricate, and protect your tools and equipment easier and better than ever.
For more information: www.3inone.com/products/marks...
Available at Walmart: bit.ly/3INONEOIL
For more tips, follow 3-IN-ONE Brand on / posts and / 3inonebrand
For more details, check out my website - www.3x3custom.com/tutorials/h...
____
WOODCRAFT LINKS
Coarse Stone:
bit.ly/CoarseStone
Fine Stone:
Extra Fine Stone:
bit.ly/ExtraFineStone
Honing Compound:
bit.ly/HoningCompound
Digital Angle Gauge:
bit.ly/WixeyGauge
Chisels:
bit.ly/WoodriverChisels
No 5 Bench Plane:
bit.ly/No5BenchPlane
Low Angle Jack Plane:
bit.ly/No62LowAngleJack
40º Blade:
bit.ly/40DegreeBlade
Low Angle Block Plane:
bit.ly/LowAngleBlockPlane
AMAZON (affiliate) LINKS
Automotive Glass Cleaner:
amzn.to/3gAvJDh
____
My Amazon Store - amzn.to/2uRpplb
_____
My Recording Equipment
Camera:
amzn.to/2scO0mu
Shotgun Mic:
amzn.to/2rp1ETp
Lav Mic:
amzn.to/34r7Ico
Voiceover Mic:
amzn.to/2rs9TOx
___
FOLLOW
Website - www.3x3custom.com
Subscribe - / @3x3customtamar
Instagram - / 3x3custom
Facebook - / 3by3custom
_____
Links above are affiliate links, I make a small commission if you click on them at no extra cost to you. clicking on them really helps me continue to make more projects :)
#handtoolsharpening #woodworking

Пікірлер: 1 100

@drskvch5768 2 жыл бұрын

You are by far one of the best teachers on KZfaq. As a new woodworker who is just gaining confidence, you make us feel at ease. Thank you once again!

@3x3CustomTamar 2 жыл бұрын

Awesome to hear!

@fosterechalimbana2160 10 ай бұрын

The knife sharpener arrived quickly and in good condition kzfaq.infoUgkxDcr-y2Pf6xdnrFHrSP7dl9kpKaCozcSQ I was happy to see that that packaging was easy to open. I did not need a chain saw to get into the package.The sharpener was smaller than I expected but that might turn out to be and advantage because it will be much easier to store than my old sharpener. The instructions on the package were simple and concise; perfectly adequate for this product. I liked that the two slots were labeled with "Course" and "Fine" on both sides of the sharpener. Now, how does it work? It's fantastic. A few swipes of the knife through the two slots and the knife was sharper than when it was new. The rubber surface on the bottom held it in place while sharpening. I thought the small size might be a problem but it was not a problem at all. In fact, I prefer it to the larger sharpeners I have used in the past. On top of that, the small size makes it very easy to store.I love it and highly recommend it.

@johnspisak9729 Ай бұрын

More awesome content from the world's most amazing multi tasker. thanks for sharing.

@brianbishop4753 2 жыл бұрын

OMG! That last bit where your being asked to make dinner while your doing something, I can absolutely relate. It seems to be when you are always in the critical part of what your doing; or when you finally get set up and are ready to get down to actual work. The things kids bring to our lives!

@3x3CustomTamar 2 жыл бұрын

Haha during a glue up is the worst! 😂

@thomaskip4276 Жыл бұрын

Nice job. I appreciate Paul Sellers and his simplistic style myself. Thank you

@Jim__K 3 жыл бұрын

This is one of the best sharpening videos I've seen. Most make it overly complicated. Yours is very well done.

@3x3CustomTamar 3 жыл бұрын

Glad you think so!

@nkabui8wnabnd8099999 3 жыл бұрын

Wow. Best sharpening tutorial ever. Learned more in the past 26 minutes than in the hours of other vids over the years. Always with the epiphanies, you. Thanks.

@3x3CustomTamar 3 жыл бұрын

So awesome to hear!

@IRAfallon 3 жыл бұрын

I so agree!! Your amazing I just inherited a bunch of plains and this helps so much. Thank you!

@3x3CustomTamar 3 жыл бұрын

mike fallon awesome! Have fun with them!

@mikejustice1196 3 жыл бұрын

You’ll lean 100 times more from the master himself, Paul Sellers

@andrewpinson1268 2 жыл бұрын

I have seen about a hundred videos also, and passed this one up when it first came out. My apologies, because this is first class. Buy the LN jig and accessories if needed, follow this video and about 90% of all your sharpening needs will be covered.

@ZigZagHockey 3 жыл бұрын

That's the first time I have seen an explanation of the setting up of a sharpening guide - complete mystery to me until now. Thanks.

@NathanBLawrence 3 жыл бұрын

There must be 200 videos on this process on KZfaq, but yours is the first one that actually didn’t make it feel intimidating. Thank you.

@3x3CustomTamar 3 жыл бұрын

Awesome to hear!

@chadwix 3 жыл бұрын

3 in one, all my life. From bicycle chains to my current tools. But most important, you have a great talent Tamar. The ability to teach and share. Great video.

@3x3CustomTamar 3 жыл бұрын

It’s the best stuff! Thanks so much! I appreciate that!

@keirfarnum6811 3 жыл бұрын

Chad Wicks Please! Not bicycle chains! There are much, much better lubricants for bike chains than oil; especially in this day and age. Use something that has silicone at least or more ideally a chain wax (it’s dry and doesn’t leave black marks and as the initial, extra wax falls off, it carries dirt and grime with it; it’s the cleanest and longest lasting option that works extremely well.) Modern lubricants for bicycle chains are much better options.

@chadwix 3 жыл бұрын

keir farnum I will check that out. Not an avid rider but once in a while.😎

@jamiegibson1010 Ай бұрын

Thankyou very much Tamar for explaining about closing up the frog gap to help with tear out. Now I know why it's adjustable.😄

@whoknewit1844 3 жыл бұрын

This is an excellent video. I appreciate you giving Paul Sellers credit. His advice seems to be the foundation of your approach. You were kind enough to give credit where credit was due. I like your discussion of blade angles. This topic confuses me. Your explanation helped to clear up some of that confusion. I liked how you created stops for various angles right on the diamond stone holder. The way you cut the recesses for the stones astounded me. I have been thinking about making a stone holder for a long time. I have designed in my mind all sorts of jigs to use with the router to cut those recesses. Then you build a plexiglass base plate for your router and cut the recesses out by hand. So much for my overthinking.

@3x3CustomTamar 3 жыл бұрын

Haha! So glad you liked it! I love Paul sellers and all of his advice.

@laurelmiles4223 3 жыл бұрын

3x3Custom - Tamar 75

@MrSongwriter2 2 жыл бұрын

I know I was like damn I wish I could route freehand like that, I also wish the Stanley router planes hadn’t gone £££ in the uk

@MrSongwriter2 2 жыл бұрын

@@3x3CustomTamar you should make Paul’s rag in a can for the rust. I use microcrystalline wax or camellia oil for storage over winter

@3x3CustomTamar 2 жыл бұрын

@@MrSongwriter2 I should

@smallshopproductions5334 3 жыл бұрын

Thank you Tamar for a brilliant tool sharpening guide video. 135k views ... and counting! I, like many other viewers learned so much in just 26 minutes that I am no longer a newbie. You are an excellent teacher!

@3x3CustomTamar 3 жыл бұрын

Glad you like it. Thanks!

@65BlueEagle 3 жыл бұрын

Brilliant! I own one of those digital angle meters for my table saw blade and a honing guide for sharpening and I groaned aloud when I saw you using them together! Something I had never thought of doing!! 🤦‍♂️ Thanks!

@3x3CustomTamar 3 жыл бұрын

Hahah! It’s the little things....

@fredparsons5134 2 жыл бұрын

Thanks Tamar. Like you I never enjoyed or had much luck honing blades. This video made the whole sharping process come together. The diamond stones are a game changer for me and you see results quickly and see what the micro bevel is doing. Other videos didn’t really show me the elusive micro bevel, I didn’t really grasp the importance of it. I’m now getting very good results, thanks to your video.

@mitchwells69 4 ай бұрын

This is so timely. I literally just started restoring my dad’s Stanley planes. Thank you for breaking it down so simply.

@CARLOSTREUIL 3 жыл бұрын

I enjoyed your video. I have found that by placing 3 stones side by side it makes sharpening chisels and short plane irons on the center stone a bit cumbersome. I found that by only putting two stones on two separate bases or by placing them on 3 edges of the same board (so that there is no center stone) it is easier to work off the edge of the jig. In order to keep the base from moving around I installed 4 non skid feet in place of the bench hook. It works for me.

@scottmartinezguitarandbass Жыл бұрын

I totally loved this video and made a very similar setup as you with the 3 stones!! I did make one improvement though. I made the middle stone slightly higher so that you could run sideways on it without hitting one of the other stones - to get rid of a burr making long strokes down the length. I noticed you wanted to do that on yours, and you had to do it at the end. Thanks for helping me with my setup!

@leonardnoel888 2 жыл бұрын

I have to compliment you for the well-done presentation and how perfectly you explain sometimes complex or overexaggerated issues. Your presentation is well worth coming back and watching again and again. I have to admit that every woodworker has his own ideas and different technics for sharpening but here we are for this. And, by the way, if you are a good cook and making good dinner for your daughter, I may come all the way from Europe and bring a bottle of the perfect wine. Thank you.

@3x3CustomTamar 2 жыл бұрын

I’d love some wine. Ha. Thanks!

@hagar301 Жыл бұрын

great tips on honing and sharpening . I just purchased a set of diamond plates up to 1200 . I used double sided tape to attach them to some melamine coated plywood and sharpened my neglected chisels . It was awesome !

@erinikeuchi6447 3 жыл бұрын

Great video as always been having a hard time bringing a few old planes back to life.. I love your angle stops. Thank you

@troywalker8078 3 жыл бұрын

I wish I could give more than one Thumbs-Up. This was extremely helpful and cleared up some of my confusion on secondary bevels. KUDOS!

@jaredgreenier7996 Жыл бұрын

I'm relatively new to DIY stuff and I'm really excited to see a young lady with this kind of ingenuity and industry. Your video is super helpful to a guy who just loves to sharpen knives. Thanks.

@joncostales 3 жыл бұрын

Excellent video. Your information is a terrific summary of so much information that is scattered across the internet. I also like that you put your own improvements on the Sellers sharpening board. I made one but will be going back to include your ideas. Finally, getting called away from the shop to make dinner is a woodworking challenge that deserves it's own video.

@imager8763 3 жыл бұрын

You just blew away any advertisement Rob Cosman ever did for Woodrriver planes. Nice job!

@3x3CustomTamar 3 жыл бұрын

Hahah! Thanks!

@mboyle48 3 жыл бұрын

Thumbs up on an informative and comprehensive video. I appreciate your detail in explaining reasons for your choices in methods and materials, such as the use of automotive rather than household window cleaner. Knowing why helps us choose alternative methods when we don't have the stuff you show. Watching your expressive hands fly around the razor edges you created added some dramatic tension to your presentation. My mind went back to The Woodwright's Shop, where Roy Underhill's demonstrations often involved blood. Great video.

@jamesthe-doctor8981 3 жыл бұрын

Roy Underhill has been a hero of mine for many decades! I can't believe how lucky the country is that he's still doing The Woodwright Shop after all these years! I stopped watching it a while back because I thought he had retired, but nope! His rusty hair and mustache are mostly gray now, but he's still plugging away. One of his best episodes for me was the one where he sharpened a chisel on the huge, pedal-powered grinding wheel. The "burr" he got on it looked more like a tiny sheet of tinfoil.

@neilf4128 3 жыл бұрын

I've seen so many of these sharpening videos. Everything from super complex, being and hour long video, to super simple, yet leaving out so many necessary details. This vide was perfectly in the middle. Straight forward. Thank you Tamar.

@3x3CustomTamar 3 жыл бұрын

So awesome to hear. Glad you liked it

@garychandler4296 3 жыл бұрын

I don't have a digital, so I just cut wedges on my mitersaw and marked the degrees on them, and actually used them alone on my stones to sharpen planes and chisels for basic carpentry. I'll be buying a guide soon, for more accurate and less work. OMG! I just saw your planer blade trick/explanation. Boyoboy, did I waste lotta time flattening the backs! Never too old to learn, thanx!

@onpsxmember 3 жыл бұрын

What you show is sound advice and will bring great results. Depending on the blade, don't spend too much time on the strop. The more passes you make, the higher the chances that you'll round your edge over slightly. If you're looking for additional information to tweak sharpness to what you're looking for in a particular blade, search for the ones that prepare cuts for microscope pictures. There is no deep dive needed but there are pointers on what to avoid in the overall process. Maybe you can do a similar video to sharpen round or v-shaped carving tools.

@haroldhubbard1643 3 жыл бұрын

This is my first time watching you,u are Just very good instructor, ty.

@3x3CustomTamar 3 жыл бұрын

Glad you liked it! Thanks!

@petermcmurray2807 2 жыл бұрын

Absolutely brilliant thank you. I have wound up with dished stones. Never used my honing guide properly. The explanation of fluids to use. The stand . I am definitely doing everything this way from now on🥰

@eariano 10 ай бұрын

Hello Tamar, I agree that you are one of the best teachers anyone can find on KZfaq ...... I started tiptoeing around woodworking about two years ago, getting most of my info from countless videos online an somehow... I always seem to orbit around your channel. I decided some months ago to go to an "official" woodworking school that will take 3 full years of my time. My teachers are great and we have covered things that maybe you haven't covered (like in-depth design, tree species, preparation of big big lumber etc) ... but you are and will most definitely be my go to place to learn ! Thanks for Colombia, South America :)

@3x3CustomTamar 10 ай бұрын

Wow that’s awesome. Best of luck on that program!

@yvettewallus119 3 жыл бұрын

Omg I totally relate to the last part - kids calling out into the garage asking about dinner. And my slight frustration in having to stop what I’m doing. But we’re moms before woodworkers, so it is what it is, right? ☺️

@3x3CustomTamar 3 жыл бұрын

Hahah yup! I have to yell out, “just 5 more minutes” very often...

@tcl5853 2 жыл бұрын

@@3x3CustomTamar : Hi, I subscribed to your channel prior to this video. Your craftsmanship, if that’s still a word, reflects and demonstrates your commitment to excellence and the time, effort and passion it takes to achieve your level of expertise. However, when I heard your son or daughter interrupt you at the end of your video about dinner, I Realized in the last few seconds of your video, as good as the first 99% of it is, caught in the act of being a good mom is the real take away. Like, family dinners, being listened too, being a kid and knowing that mom has your back. I would have subbed just for that; because, even though being an outstanding woodworker is wonderful and rewarding. That accomplishment pales in comparison to being a good human being and a great mom or dad.

@PratabAli 3 жыл бұрын

I've watched many tool sharpening videos, but I found this the clearest and most simple explanation, for my novice inexperienced mind to follow. To a hungry child 15mins is probably an eternity. 😆

@lindseyestep7981 3 жыл бұрын

This is soooo helpful!! Thank you! I’m new to woodworking and I’m terrible at sharpening my tools! Thanks for the tips!

@jwong19 3 жыл бұрын

Ok, yes indeed...a "101" Master Class for DIY enthusiasts. Really, madam, always waiting for a new video to enjoy your work. I certainly agree when you mentioned what works for anyone during the process to reach the final goal of a well done and the great satisfaction at the end of the road, that implies, to go for more challenges. As usual, my wife and I send greetings and our respects from PR. God bless you, your family, and those like me in the always learning curve.

@3x3CustomTamar 3 жыл бұрын

Glad you liked it! Thanks!

@ShawnHeath 3 жыл бұрын

LOL, I love the "bloopers" you include in your videos! I'm feeling you with the kids' demands. Between work and family, I struggle to find time to spend on woodworking. Speaking of which, I'm going to dash downstairs and do a quick glue-up... ;-)

@3x3CustomTamar 3 жыл бұрын

Haha! Do what you gotta do!

@stroys7061 2 жыл бұрын

The bloopers are very educational.

@frankves 3 жыл бұрын

Wow. That’s exactly how I do it. Nice work! One word of warning: some honing guides have a different mounting points for chisels and plane blades and they might need separate stops for alignment!

@3x3CustomTamar 3 жыл бұрын

Awesome. That’s a good note!

@lajohnson1ly 3 жыл бұрын

Chisels absolutely need different stops. Frankly, I'm surprised that the measurements and instructions didn't come with a Lie-Nielsen honing guide, considering how much you must have paid for it.

@3x3CustomTamar 3 жыл бұрын

Larry Johnson it did come with it. I lost it....

@lajohnson1ly 3 жыл бұрын

@@3x3CustomTamar Reputed to offer excellent service and support, L-N would send you another set if you asked, I'd think. But you can do a separate set of chisel stops with that dandy electronic protractor. Your shavings demonstrate an excellent edge. Using my Eclipse honing guide, upon which the L-N is based, I tested your set-up. Using the plane projection, my chisel bevel would have been about 27 degrees, give or take. Not having the blade flat on the board when setting the projection also makes the angle more acute. I'm not a skilled enough woodworker to know how important this all boils down to. Like you said during your introduction, it's easy to be confused by the choices among sharpening systems. I favor yours, though after using the guide to initialize, I've gone to maintaining it freehand, using a bevel gauge to check my work from time to time.

@jackostergaard4624 3 жыл бұрын

the L-N guide has a bunch of different holding blocks for all sorts of different blades including skews. And they cost about $40 for each set. It's a really nice guide but it's really expensive with all the correct parts.

@maxpallett2869 Жыл бұрын

Thank you so much I’ve had so much trouble trying to sharpen my chisels today I’m going to follow every step of your video again thanks from England ❤️

@quirtdrozario3038 3 жыл бұрын

This is the most clearly informative video on sharpening I have ever come across. Thank you. Excellent.

@3x3CustomTamar 3 жыл бұрын

So awesome to hear!

@ChinJazz 3 жыл бұрын

Hey Tamar, great pragmatic step by step, and why video! Much appreciate it. I'm at a time where I should probably get these stones :) Wondering if you can share what honing guide you're using? Or even a link? Thanks so much!!

@emmabingham544 3 жыл бұрын

Looks like a Lie-Nielson

@andrewpinson1268 2 жыл бұрын

@@emmabingham544 Yes it is. This is probably the best jig out there. It is pricy however. Has lots of accessories for different tools also. Worth the money.

@jpott7457 3 жыл бұрын

Very Informative video, thank you. I currently use whetstones but the results are not the best and I am tired of resurfacing the stones to keep them flat. I think I will give the Dia-Sharps a try. I looked and looked and could not find any information on your honing guide, it looks far better then the two I have. Can you please post the brand/model or a link to where to purchase it? Thanks again.

@PikkaBird 3 жыл бұрын

It's a Lie Nielsen and it costs about as much as the moon.

@CurseTheDarkness 8 ай бұрын

For people just getting into woodworking, easily available, affordable, flat, diamond stones is a relatively new development. They are gradually starting to take over woodworking but there are still lots of people using different systems and getting good results. But for beginners this diamond stone setup is by far the easiest way to go.

@sevaricofrathe5733 3 жыл бұрын

Thank you so much for this. I've watched other sharpening guides but none of them have pointed out the super obvious part about flattening the back right after you buy the chisel. After doing this my set is now cutting way better. Thanks again, love your guides keep it up.

@3x3CustomTamar 3 жыл бұрын

Awesome!!

@rfc9980 11 ай бұрын

Tamar, you are one of the best woodworking KZfaqrs that I follow. I've been researching chisel sharpening lately and just found your post. Answered a lot of my questions. Those diamond stones aren't cheap but probably the best bet long term. I'll give them a try. Thanks! BTW, recently finished your scrap lumber cart project which turned out great. Keep 'em coming.

@SirBenJamin_ 3 жыл бұрын

Where you off to bruv? .... "Just gonna go initialise my plane blades, fam"

@3x3CustomTamar 3 жыл бұрын

Yup

@alisdairmccabe7497 3 жыл бұрын

Nice to see an english accent here :)

@deedeeryen 2 жыл бұрын

You have the best videos ever! Thank you! Love how beautiful your chisel cuts are in your Moxon vise video. I now know how to sharpen my chisels to get a better, crisper cut!

@andersonolive4553 2 жыл бұрын

Thank you so much for this Tamar. After hours of research I watched your video and Paul Sellers video, I feel confident and informed enough. I’m just now ordering everything. You have a fantastic way of teaching and elaborating on the appropriate things for us beginners. I really really appreciate your channel! Thanks

@3x3CustomTamar 2 жыл бұрын

Awesome to hear. So glad it was helpful!

@garynovak7977 3 жыл бұрын

{{Notices child in the background}} Me: There's going to be something good in the outtakes. I was not disappointed.

@3x3CustomTamar 3 жыл бұрын

Hahah! I didn’t manage to capture the footage where he was bike riding around my shop.... it was quite funny

@hughlaxton7852 3 жыл бұрын

Thanks for giving us your time. I really enjoyed it and realise now why my sharpening process has been taking me too long!! I also see the benefit of having a dedicated panel with individual diamond 'stones'.

@3x3CustomTamar 3 жыл бұрын

Glad you liked it!

@cathiematthews1359 3 жыл бұрын

Thank you so very much. I have hand tools that I have been struggling with, and your tutorial was like a ray from heaven that saved me from hours of frustration! Thank you again for your help.

@3x3CustomTamar 3 жыл бұрын

So awesome to hear!

@SAMUELPEREZ-yc8uq Жыл бұрын

Thank you for the Jig idea and keeping it informative and simple. Your videos are great.

@ranlove47 2 жыл бұрын

Nice sharping tutorial probably best ever.

@joycenorell3157 3 жыл бұрын

So glad you made this video; I’ve been wanting to hear how you did all your sharpening. Very clear and understandable!

@3x3CustomTamar 3 жыл бұрын

Glad you liked it!

@enricohernandez8356 2 жыл бұрын

Thank you for clearing that up about the automotive glass cleaner , it makes much more sense to me now , I wish others would let people know what to use

@strangedays82 Жыл бұрын

Just so happy I found exactly the video I was looking for. Bought a plane, diamond sharpening stones and watched too many videos before I came back to trusty Tamar! Thanks for a great video and with a five year old at home myself, I totally get that ‘sigh’ at the end!!

@The_Ol_Bizzaroo 3 жыл бұрын

My first hand planes arrive this week. This is incredibly helpful. Thanks for another great video!

@3x3CustomTamar 3 жыл бұрын

Awesome! It’s a learning process for sure! Have fun figuring it all out!

@jameskenis439 3 жыл бұрын

This is one of the best sharpening videos I’ve watched. Thank you.

@3x3CustomTamar 3 жыл бұрын

Awesome to hear

@yonatanbenavraham6598 3 жыл бұрын

Very nice, I have been a wood worker and building contractor for many years. I am 68 years old and I picked up a few tricks that will save some time sharpening. I like my blades crazy sharp and I already have the diamond hones. Thank you for taking the time and effort to make this Vlog.

@3x3CustomTamar 3 жыл бұрын

So awesome to hear! Glad you liked it and שבת שלום!!

@yonatanbenavraham6598 3 жыл бұрын

@@3x3CustomTamar גאם לאך, תודה

@LockStoppageSandwich 3 жыл бұрын

Love it..............as just purchased a set of chisels and a spoke shave (to make CBG’s). I was contemplating getting a set of stones etc. But this video has changed my mind and have gone straight over to the diamond stones. So have ordered the stones, a strop, some automotive glass cleaner and of course the ubiquitous 3 in 1 oil. You have taken all of the mither and mystery out of sharpening for me............thank you from the UK

@3x3CustomTamar 3 жыл бұрын

So awesome to hear. Have fun with it!

@donalddparker 2 жыл бұрын

Great intro for those of us new to using planes. Thanks much!

@maack87 3 жыл бұрын

Thank you for this video, it was very helpful with tons of good information. Being new to woodworking I now feel comfortable creating my own sharpening routines

@3x3CustomTamar 3 жыл бұрын

So awesome to hear! So glad it was helpful! It’s def a learning process but it’s all part of the fun

@johnm7469 3 жыл бұрын

I made this jig today. So satisfying routing out the holders! So easy to adjust the angle now. Thank you!

@3x3CustomTamar 3 жыл бұрын

Awesome! So happy to hear!

@jamesthe-doctor8981 3 жыл бұрын

This is a really great video, thanks! Sharpening baffled me for years and years, until John Juranich wrote and published The Razor Edge Book of Sharpening, back in the mid-80s. I think he still holds the Guinness World Record for sharpening *AND SHAVING WITH* a double-bitted axe! Looking inside, I saw photos of his 10-year-old daughter sharpening a skinning knife, then actually shaving her daddy's face with it! I had read dozens of books and articles about sharpening, and the one thing that book had that I had yet to know about was "The Burr!" The same burr you talk about in this video, but with the emphasis on double beveled blades like knife blades, as opposed to single bevel, chisel-type blades. It was an epiphany! Thanks again for this video, it's going to help a lot of people!

@3x3CustomTamar 3 жыл бұрын

Awesome! Yeah. That burr is sometimes really confusing

@jamesthe-doctor8981 3 жыл бұрын

3x3Custom - Tamar yep, and that book explained it so simply that sharpening became child’s play. Thanks for the reply!

@andrewlane6958 2 жыл бұрын

I absolutely love your videos. Have been watching for years. But something about this one in particular... You, my talented woodworking sensation, are flat out, undeniably beautiful. Keep doing what youre doing. We love you for it!

@3x3CustomTamar 2 жыл бұрын

🤘

@arturboer 3 жыл бұрын

Uaw, amazing! You said: “there’s no right way!” Actually I think I just found the “right way” in your teachings! Perfect way! Thank you so much to share with us! And I love your work! 🤩😃👍🏻🙏🏼

@3x3CustomTamar 3 жыл бұрын

Haha awesome! Thanks!

@Longnose154 3 жыл бұрын

What an amazing video!! I learned so much extra details on sharpening. Also I'm literally right now about to build a jig for my stones and I will totally scrap my design and go with yours😝😝 it's so simple, neat and elegant. Thank you so much for that inspiration!

@3x3CustomTamar 3 жыл бұрын

Awesome to hear! Good luck with it!

@AlfonsoFaustino 3 жыл бұрын

Wow! I like the super-thin shavings, seeing the grains of the wood, and the shine of the wood. Very cool video.

@3x3CustomTamar 3 жыл бұрын

It’s so fun to do!

@madhuhs348 8 ай бұрын

Thank you so much! I was just about to build the diamond stone holder after watching Paul Seller's video and KZfaq suggested this!!

@F1DesignUS 3 жыл бұрын

The edge angle blocks are pro level move! Great job and I am so doing this!!!! I always fight with the angles!!!!

@3x3CustomTamar 3 жыл бұрын

Awesome! So glad it was helpful

@tonyturner9333 3 жыл бұрын

Really Love This !!! Never had any success with sharpening chisels properly, getting the stones ordered as we speak, real informative video, Thanks so much 🙂👍👍

@3x3CustomTamar 3 жыл бұрын

Awesome

@toddwilliams254 3 жыл бұрын

Absolute best explanation of the most sensible sharpening method most woodworkers should use!

@3x3CustomTamar 3 жыл бұрын

Awesome to hear

@bulletproofpepper2 11 ай бұрын

Your on point with everything I have heard along the way. Thanks for reminding me of some of the things I need to get back in the habit of doing. New info was the auto glass cleaner has anti-rust chemicals in it. Thanks for sharing. Oh, and make what makes you happy.

@dottyjyoung Жыл бұрын

Thank you! I've bee. Watching Paul Sellers, & didn't understand the purpose of some of the steps. NOW I do. I just got my first hand planer, & a *ton* of lathe chisels, all of which need sharpening. :)

@captbuscemi 3 жыл бұрын

Brilliant! Just getting back into woodwork after many years away, your vids are very well done, really simple and practical advice 😀

@3x3CustomTamar 3 жыл бұрын

Awesome to hear. Thanks!

@emm_arr 3 жыл бұрын

14:19 I can recommend Renaissance Wax and Boeshield T9. Neither is cheap, but tools are not cheap. I use both of these on my planes, and so far so good in the UK where atmospheric humidity tends to outdo that in the USA. I hope you are enjoying your planes!

@hanslgurtner3082 Жыл бұрын

Hello Lady, I ordered the tool for grinding today. Thanks for the good advice.

@frankmusiol6871 3 жыл бұрын

Wow, tolle Schärfstation und tolles Werkzeug👍

@dominikplouffe4191 2 жыл бұрын

Great video! Being a parent and working at home can really be frustrating sometimes. The little segment at the end was so awesome and tuned into reality. Thank you!!!

@3x3CustomTamar 2 жыл бұрын

Haha it’s a lot 😂

@rosswaring2835 3 жыл бұрын

That’s how I sharpen my plane irons and chisels. Excellent, I wasn’t doing it wrong❤️. Great info, well presented as usually Tamar. 👍🏻

@3x3CustomTamar 3 жыл бұрын

Awesome. Glad you liked it!

@slymike21 3 жыл бұрын

This is a great video. Thanks Tamar. I really like your take on the sharpening board. The angle set up guides are a great idea. I’m looking forward to sharpening and honing in my little shop now. Thank you!

@3x3CustomTamar 3 жыл бұрын

Glad you like it!

@davidsewell4239 3 жыл бұрын

Your presentations are pure genius! So much useful information presented in a very engaging manner. I've learned so much from your posts and you've made woodworking fun. Thank-you from a UK subscriber.

@3x3CustomTamar 3 жыл бұрын

So awesome to hear!

@keithplumley2054 3 жыл бұрын

Crazy that this video came up in my feed, I just ordered these exact same sharpening plates and guide. This video will be very helpful. Also it's great to see someone else using Paul Sellers knowledge, I love learning from him.

@3x3CustomTamar 3 жыл бұрын

Awesome! And he’s the best

@Ifudjdjdkdjfjdjdj Жыл бұрын

Thank you so much for this guide. As a beginner woodworker, I definitely loved this informative detailed video

@3x3CustomTamar Жыл бұрын

Glad it was helpful!

@banquo3051 6 ай бұрын

Love your presentation, the fact you name check Paul sellers and that you have kids around and in your workshop and video. Great content. Thanks

@3x3CustomTamar 6 ай бұрын

Glad you liked it!

@mariangraham9074 3 жыл бұрын

Your timing for this video couldn't have been better! I just learned new items like chisels & planes don't COME SHARP. I hadn't planned to get into all that yet since in learning the basics but I just had an experience where I needed to chisel & it was a nightmare. So thank you for your timely & informative video.

@3x3CustomTamar 3 жыл бұрын

So glad my timing was good! Ha. Yeah. That was something I had to learn also... they come sharp. Just not sharp enough. Ha

@dddube12 3 жыл бұрын

All very good information, loved the set up of the sharpening board!!!!

@3x3CustomTamar 3 жыл бұрын

Thanks! I’m so happy I finally decided to make it

@dooglemcfrugal7307 3 жыл бұрын

Thank you. Such a simple idea. Enjoy your presentations

@3x3CustomTamar 3 жыл бұрын

Glad you liked it!

@plssmellmycheese 3 жыл бұрын

She's always good! I have ordered my diamond stones and planned pretty much what u have elegantly shown us. Thx 👏😀

@3x3CustomTamar 3 жыл бұрын

Awesome! Glad luck!

@georgebartholemew8444 3 жыл бұрын

Really liked the video! Took copious notes. Been using 3 in 1 for years.

@3x3CustomTamar 3 жыл бұрын

Awesome. Yeah! It’s awesome stuff

@debragon930 3 жыл бұрын

Thanks for sharing this video. The tips are great. I’ve tried a lot of different methods and this one seems to be the easiest and much more precise. I’m going to sharpen my chisels and flat blades this weekend. Oh and thanks for taking so much time to explain the methods you use. Every time I watch your videos I gain confidence.

@3x3CustomTamar 3 жыл бұрын

That’s so awesome to hear! Good luck!

@dismisphone1588 2 жыл бұрын

@Juangaba 2 жыл бұрын

Excellent as always, impressive one hand push, I’ve got a long way to go this is encouraging

@bobbonham4823 3 жыл бұрын

I think you have an excellent process. Thanks for sharing the techniques.

@3x3CustomTamar 3 жыл бұрын

Glad you like it!

@JoseRodriguez-gr3ci 3 жыл бұрын

good morning friend .... Today I learned something new ..... it's good to see that a pretty woman is a warrior in the world of carpentry .....that she succeeds on youtube