Thank you so much. Before I found your videos I couldn't even get started in Fusion 360. This is only the third one I've watched and I'm already making great progress.

Don't stop dude. Your lessons are absolutely great.

I just found this and I cannot believe how much time this will save me in the future! Thank you so much!

Lars, thank you for your clear and concise explanation on using constraints and dimensions.

This is one of your best videos -I'm biased. Thank you for doing what you do for us.

Thanks! This is very helpful. I'm a beginner and you filled in several gaps in my understanding, tied together a lot of concepts and answered several questions. I've been working through a book with 100 2D/3D widgets to learn drawing in F360 and was slowly figuring out the flow you demonstrated of sketch (makes sense why they're called sketches now!), constrain, then dimension. Also, I really liked the tip about staying in the line mode and then drawing a tangent arc - that is so much easier than what i was doing!

One of the best tutorial about Fusion 360. Thank you.

I think this is the video that makes the most sense for laying out. I too used to start adding dimensions first. Can't wait to have some time to make a few test sketches using this method...Thanks Lars!

Hi Lars, beacause of you i m fighting with Fusion for over a year ... pls continue showing us your knowledge... you know what .. always have two screens trying to copy you .. and this is how i learn ...

Thank you Lars. I am new to using Fusion 360 and I just spent an hour trying to find out how to continue drawing a spline that I was working on yesterday and maintain a smooth path. Your tip at 8:58 was exactly what I was looking for. [Liked and Subscribed]

Thank you. I listed you (to the Fusion 360 team in a recent satisfaction survey) as one of three individuals I have learned the most from videos on Fusion 360. I know this is a four year old video but it is still very helpful for newbies (including myself in this category). I use Fusion 360 for designs and g-code generation with the Langmuir plasma cutting table. Your pace and empathy is very encouraging.

I've been at Fusion for about a month now. I really just today started sketching as you suggest - rough sketch, constrain, THEN dimension. Man does it make things easier! With that understanding i did my 1st fully parametric model today. I'm very happy! THANK YOU for sharing your expertise!

New Sub! Recently got into Fusion after starting with FreeCad. I am blown away by Fusion’s power and simplicity. Your videos and tutorials, are excellent and very well made; very comprehensible. Thank you for sharing

OMG. The arc tangent dimension is amazing!! Thank you so much for that!!! I am always wanting a hole to be a certain distance away from the edge of a part to make sure there is enough material, or something like that. Honestly, dimensions from the center of an arc seem way less often used. What I used to do was draw tangent guide lines and specify the distance from there. Works, but very tedious, and pollutes the sketch with more non-essential lines. This is way better!

This has been a good session - it’s cleared up several questions I had and it highlights some of the brilliant features of Fusion360.

I'm at the point in my learning curve where quick videos like this flesh out 'things I want to do easier and better'. Thanks for this.

Another Thanks......GENIUS Explanations as always. For someone not "knowing" English......I think you know far more than I, and I'm native speaking!

Thank you Lars, very useful information and it explains what them symbols are!

Loving your tutorials as a new user. Lots to learn

I can't thank you enough for doing these videos. This is exactly how I needed this to be explained and you really do a fantastic job.

I learn so much in your channel about F360. Sometimes small details unlock great potential. Merci beaucoup!

First constraints then dimensions. Started today and this makes such a difference. Thanks once more.

Hey Lars, Loud and clear, learn a lot ! Thanks to share your knowledge.

Very intuitive explanation, thank you!

Extremely helpful video. Thanks so much!

2 months ago I started to use fusion 360 moving away from 123d design by learning from Lars’ and Paul McWhorters videos. This session consolidates and wraps up concepts neatly and helps me get rid of bad habits I developed in the process of learning a new application. I really enjoy these sessions and want to say a big thank you for being so productive and putting in the effort. Well done👍

Love your tutorials Lars, thank you!

Very impressive way of teaching. Thanks for your time shared

Extremely helpful. Thank you Lars.

30 minutes of constraint explanation will solve all the issues I am having in my drawing! Thanks Lars!

You are really a good Guru, Larsji. Loved your Channel, Your Knowledge will definitely change the lives of technical students. I wished i could have made it those in my apprentice days. Anyway knowledge needs no bounds of ages.

Excellent, just what I needed. Thank you. Keep up the fantastic work... I am here, cause you are there!

Thanks, definitely helped me with some stuff I have been struggling with. Love your videos.

Thank you so much, Lars! I learned so much from you! Appreciated!

You are amazing teacher, I learned a lot from you. Thank you.

Thank you Lars, you have been like a guardian angel on this Fusion adventure

Thanks Dude! Great video, it cleared up a lot of questions I have, especially when I go to edit my dimensions later.

Mr. Lars, you are the One. Thank you very much for time to help us. God bless you.

Thanks Lars, another great video!

As a newbie, I was absolutely struggling with fusion 360. This video is an eye-opener. absolutely essential viewing. Thank you. Now I’ll check the comments to see whether anything useful has transpired in the last six years you made this

I could not like this video more!!! Thank You Lars

You are the best. Thanks for what you do and always keeping it so simple anyone can follow along.

A year and 3 days after the fact, I still learned a ton today, constraints have been giving me fits, simply because I did not understand how to apply them, looking forward to a better (more constrained) tomorrow! Happy 2019 to you Lars!

Superb educator, thanks ! Really good

new guy here very excited!! very helpful Lars!

Thanks Lars - enjoyed that! Have been mucking about with sketch and now I know what those symbols on the sketch mean! Love those constraints! Have used Geogebra - a mathematical geometry program and the constraints in Fusion do the same thing and make sense! Thanks again, Stu

Your explanations are super good!!!

Very helpful I've been dimensioning everything vs doing constraints! Explains why I've had so many issues iterating / carrying changes forward ( eg I have to edit previous steps through to the end )

Keep 'em coming Lars. These are most helpful!

"Awesome!!! indeed. Even though i started with your beginner videos - the box, I continued to struggle "badly" trying to get some semblance of control over my simple creations! Suggestion - add a text mention at the end of the box video to watch this one next. This one nails it in so many ways, given the many controls available in F360. You rock!

Thanks so much for this explanation. It helped so much.

Very easy to follow. When a person can show examples and be able to explain them where it is understandable then we know you know your business :) . Thank you!

Thank you! You are the best!

A very useful video. Thank you so much Lars

This was extremely helpful... I’m as new as new gets. This helped me understand a lot of things and I’ll def be bookmarking it. Thank you!

Thanks Lars, for another helpful tutorial

fantastic! love the driven dimension toggling - thank you!!

By watching your tutorials now I can design what I imagine. Thank you very much

OMG I am learning so much. I wanted to mess around with this as just a fun thing. But now because of what is going on in 2020 I can't really afford to pay someone to design the things for my home project. So I am trying to design it myself. Your videos are so helpful even if some are old. No I can do some designs I been wanting to make and getting them CNC or even 3D printed is not a problem. Thanks so much. BTW my 11 son can't wait till he can get in here and start designing some things with me.

Dank je wel, voor je uitstekende uitleg, thanks a lot for your excellent explanation

Awesome videos, awesome channel. Thank you for the videos

LOVE that right click for tangent dims! Needed it yesterday but learned today, lol.

i learn every day, its so simple when i see you at work on fusion , good that you exist

This video is great! I'm new to F360 sketching

Best explanation on KZfaq ......thanks

Dette faen meg det beste online kurs jeg har vært med på, fantastisk lærerikt og spot on på det jeg lurer på...problemet er å huske alt

Holy Heck! The mouse-generated tangent function you described has solved an 'issue' I was having with my 3DX CadMouse. I do get the occasional switch-bounce on the LH button and so was holding down the button to try to counter this. I suspected there was a function there that created some kind of arc that I was unaware of - and your explanation nails that one. Super-useful!! Now, if I can just get the mouse to occasionally stop drawing short lines at the beginning of the line I want, I will be a happy bunny! (I have lost count of the amount of times I have had lines being out by fractional angles or distances because there was a minute 'blip' at the beginning of a line. Sometimes these are not noticed until many extrusions have taken place - a l-o-n-g way down the timeline. 🤦‍♀️🤣🤣 )

Who could dislike this? Must be the Solidworks community haha Thanks Lars!

your videos are great!!

Awesome as usual. Thanks and happy new year.

Great lesson Lars! Tks! Björn

Very informative. Thank You.

Another excellent training video, thank you Lars. Your style is perfect for me as a beginner and without your videos I think I may have given up. After watching a few videos I am getting comfortable with designing enclosures for my projects. Brilliant stuff :-)

Always learn something new watching your videos Lars. Guess I should watch more often :)

I like your way to use Fusion 360 and you explain very good

Awesome! Very useful!

Thank you. Helped me a lot!

Thank you! Awesome day!

This was a great help to me, thank you.

extremely helpful, thank you sir!

Thanks! Very useful, indeed!

Awesome as usual and so very helpful

this vedio is really well done and explained really well, good job 😉😉😉

Just wat I needed to know.. Keep them coming .....

You ´re Awesome!!! Thanks for your clear Explanation....

Thank you, Lars, super helpful!

Thanks, so useful!

Great video...thanks for making these. I'm switching over from Rhino and I can't believe what I've been missing F360 is amazing

great tutorial and nice t-shirt

This was extremely helpful. Constraints are one of the hardest concepts to get down in Fusion 360, at least for me.

Love watching your video,s ever thought of putting them all on a tutorial dvd it would really help an old guy like me to have them all in one place

Great clip very helpful as I have been bluffing my way through 2d without using constraints for ever..... Two thumbs up

I appreciate, thank you so much

This is a great effective tutorial...............THAKS DEAR

Love your class! Tank you!

That was very helpful. Thanks

Great video for us rookies

You're awesome, thanks a lot.

Thank you Lars.

Hi Lars. I'm already advanced to the beginning, but I have to consult thanks to your videos I'm still learning to see you, I'm looking forward to your professional videos I'm Pavel Taufer and I'm an Electrical Engineer and I need to do machine and so I must be interested in engineering