How Long is Too Long to Apply DTF Powder?

No video

How Long is Too Long to Apply DTF Powder?

Рет қаралды 13,931

Күн бұрын

🤑 Want to Save HUGE on Mimaki Printers!?!? 🤑
Take $8000 off during our LIMITED Summer Sale!!
• Mimaki TxF150-75 SUMME... -~-
🕒 How long should you wait to powder your DTF prints? In this experiment, we uncover the optimal window for powdering, from zero seconds to 120 minutes, to ensure top-notch DTF results. Discover the key to achieving the perfect texture and durability in your prints. 🖨️💡
🕒 Timing is everything when it comes to powdering your DTF prints, and we've embarked on a journey to unveil the optimal window for this crucial step. In the fascinating realm of Direct-to-Film printing, we've conducted a comprehensive experiment, leaving no interval unexplored. Our quest begins with zero seconds, where we immediately apply adhesive powder upon the print's completion. From there, we extend the wait, venturing into the territory of 30 seconds, 60 seconds, and even 120 minutes - that's a whole two hours!
Throughout this enlightening exploration, we closely observe the adhesive powder application process and assess its impact on print quality. By testing various intervals, we aim to discover the sweet spot for achieving impeccable DTF prints. But we won't spoil the findings just yet - you'll have to join us on this captivating journey to uncover the insights that will elevate your DTF printing game.
So, if you're eager to unravel the mysteries of timing in DTF printing, this experiment is a must-watch. Join us as we dive deep into the details, explore the nuances of the process, and reveal the results that will help you achieve top-notch DTF prints every time. Don't miss out on this enlightening exploration into the world of powdering your DTF prints! 🖨️🔍👕
---------------------------------------------------
🚨 DTF BOOTCAMP IS BACK! SIGN UP TODAY TO MAXIMIZE YOUR SKILLS WITH DTF
dtfsuperstore.com/collections...
----------------------------------------------------
Join Our Facebook Group: / 3264492083648783
DTF Superstore is your all in one shop for all Direct to Film supplies. DTF printers, supplies, equipment, film, inks, software, heat presses, and much more.
*Same Day Shipping on Orders Received By Noon AZ Time
Visit us today!
DTFsuperstore.com
Adobe Stock: prf.hn/l/LbYRdLQ
(this is an affiliate link)
Fast Shipping! Low Prices! Large USA Inventory!
CMYK + White Ink DTF Pack
dtfsuperstore.com/collections...
Huge Selection of Film
dtfsuperstore.com/collections...
Adhesive Powder for DTF Printing
dtfsuperstore.com/collections...
Save Now on Our RIP Software
dtfsuperstore.com/collections...
Let Your Equipment Pay For Itself With Our Financing Options
dtfsuperstore.com/pages/conta...
We accept all major credit cards, Apple Pay, and PayPal

Пікірлер: 78

@kspec2001 10 ай бұрын

great little video. i know sometimes the efforts that go into a video are not always shown but its appreciated!

@DTFSuperstore 10 ай бұрын

I appreciate that!

@Fancylooks Ай бұрын

Honestly, I never thought of this important point, I always thought I should be a quick as possible with my powdering, but you prove me wrong, I will have to find out with my inks and powder, how long I need to wait, thank you for all the work this video experiment took.

@DTFSuperstore Ай бұрын

You're so welcome!

@jjuanguevara1 8 ай бұрын

What I have found is that time doesn't matter if the ink is still too wet. So wait until ink looks completely matte. Then it's perfect for powdering.

@DTFSuperstore 8 ай бұрын

You are correct, every environment is different so it might tack up quicker in some places.

@Doctaj54 4 ай бұрын

@@DTFSuperstore Good info! Would the granules size matter? I've seen fine, medium, and coarse powder sizes.

@DankUrbanBoss 7 ай бұрын

I’m so glad your channel came up on my feed I absolutely need this

@DTFSuperstore 7 ай бұрын

Awesome!

@cindyziese5706 10 ай бұрын

wow great video this explains so much ! I am so glad you are doing so many techincal videos tohelp us all out! Again Thank you !!!❤❤

@DTFSuperstore 10 ай бұрын

It's our pleasure!

@marksarckees8564 4 ай бұрын

Great information. Thanks for your efforts.

@DTFSuperstore 2 ай бұрын

That's what we're here for. Glad it was useful!

@user-iq9rl2om4v 7 ай бұрын

This may explain some of the issues we've been having. We have been applying powder pretty much right out of the printer, but we have been having issues with the film not releasing from the image - just like your 30/60/90 second transfers. Now that I think about it, our larger transfers that take a long time to print don't seem to have as much problem - probably because most of the transfer is actually waiting several minutes before getting powder. Now we will be experimenting with print to powder times to see if that solves the issues, and to see what works best in our setup. Thanks for the great video!

@DTFSuperstore 7 ай бұрын

Glad we could help. Also check your time, temp and pressure for pressing. The pressure plays a very big roll in the transfer adhering properly.

@daehau.k9485 10 ай бұрын

Great video, thank you.

@DTFSuperstore 10 ай бұрын

Glad you liked it!

@joshburkhart4812 5 ай бұрын

Super helpful. Thanks

@DTFSuperstore 5 ай бұрын

Glad it was helpful!

@rbtmachinery_michaelzheng7264 8 ай бұрын

Nice and Professional 👍

@DTFSuperstore 8 ай бұрын

Thanks 👍

@nanlyano2677 8 ай бұрын

Great video

@DTFSuperstore 8 ай бұрын

Thanks!

@antwanmarshall5949 Күн бұрын

Hello, very great video and it was a lot of help. I did have a quick question. On some of my prints I get some cracking or minor flaking when I peel after pressing. Do you know off hand what could cause that? I adjusted the temp and time, time under cure, still kinda get the same issue. Printing on 100% cotton.

@andreariantova3840 2 ай бұрын

So helpful 🫶

@DTFSuperstore Ай бұрын

Glad it was helpful!

@KillbarrackShoppingCentre 4 ай бұрын

Answering the real questions, thanks for this video. Can you do a video on maximizing vibrancy for neon like colours.

@DTFSuperstore 4 ай бұрын

Appreciate it! Thanks for the question! Yes we will do that!

@djgrandauto8541 10 ай бұрын

I’d love to see a video on setting up the heat plate. My 2 head has it attached to printer and I’ve seen the plate attached to shaker ovens. Finding that right temp to dry the ink faster before powder. I’ve got my settings. Just curious what other peoples are.

@DTFSuperstore 10 ай бұрын

Our headed guide plate is set at 75 C for our Mongoose 2 head. A faster machine might benefit from a slightly higher temp but no too much, you don't want to sure it before it gets powdered.

@deseartdtf 3 ай бұрын

Your video is very good. However, I think it is interesting to add that a very important factor linked to the polyamide application time is the relative humidity and ambient temperature.

@deseartdtf 3 ай бұрын

This greatly influences the time to avoid moisture retention. Large format printers, for example, have a heater after printing and before the polyamide to remove this excess.

@DTFSuperstore 2 ай бұрын

You're right, the environment plays a large role. Thank you for your engagement and the watch!

@johnsonjikira 8 ай бұрын

Thanks for the video. May I ask which heat press you were using?

@DTFSuperstore 8 ай бұрын

It is our swing away heat press. dtfsuperstore.com/products/swing-away-heat-press-1

@handmadechiccrafts3463 9 ай бұрын

Great video! I have a couple of questions. I hope you can help. Why would the transfers won’t be transferring to the shirts? I mean like, they don’t stick to the shirts. Is it a powder issue? Which powder do you recommend? Thank you so much!

@DTFSuperstore 9 ай бұрын

If there is powder and adhesive and it's been cured the transfer not sticking to the shirt is probably an issue of not enough pressure or heat. Use an infrared thermometer to check your heat press and make sure it is actually at the temperature you set!

@jeffhudson1744 8 ай бұрын

Hi, we do a 10 second dry for the ink then to power right after. we get a good coating of power but what is puzzling is that sometimes (we do hot peel) they print well and sometimes not, sometimes they will not stick at the edge when we start the peel. would that be the press temperature? just looking for your opinion? just wondering, what are your settings for pressing? been using 315 for 35 seconds then 10 to 15 seconds on second press. really like the video. thank you,

@DTFSuperstore 8 ай бұрын

Your temps and time seem fine. We have two thoughts, try a higher pressure and also try waiting a little longer before you powder. Your transfers will likely feel softer and if your powder is thicker it might not be melting enough when you're pressing. That may be what giving you the inconsistent peel.

@sandradowell9666 10 ай бұрын

Awesome video! I wondered why my prints weren't holding up in the wash!! I'm wondering if you can tell us what your washing and drying procedures are? Thanks

@DTFSuperstore 10 ай бұрын

Normal, Jeremy uses a GE frontload washer on the color garment setting with Tide detergent and the dryer on automatic mixed load.

@sandradowell9666 10 ай бұрын

You put them in the dryer!!!! I’m definitely doing something wrong then because if I put mine in the dryer it makes them peel! What might cause this to happen??

@DTFSuperstore 10 ай бұрын

@@sandradowell9666 well it could be a couple of things. Not enough adhesive powder, could be not enough pressure or wrong pressing temp. Are you doing a second press?

@sandradowell9666 10 ай бұрын

hmmmm, I am doing 15 seconds at 302 like the powder I bought instructs and then letting it cool completely, peeling and doing another 15 seconds. I am using heavy pressure. I just started doing 4 minutes as the video suggests between 1.5 and 5. Maybe the powder I'm using? I do tend to put it through the powder twice so that I know there is enough. Thank you for taking the time to help me!

@DTFSuperstore 10 ай бұрын

@@sandradowell9666 what is the fabric you're pressing on?

@mkhalifa9898 2 ай бұрын

I want to ask about the ordinary oven of i can use it for curing? And joe to avoid melting of the inks while curing.

@DTFSuperstore 2 ай бұрын

Hi there. You would like to use a conventional oven to cure? It is possible though results will be difficult because it's hard to get consistent pressure.

@ritaurbina8281 18 күн бұрын

What do you do with left over film?

@DTFSuperstore 18 күн бұрын

Throw it away, not really anything else you can do.

@johnoffoe 5 ай бұрын

Nice video, I have an issue, whoever I print I see white outline around the print, any help

@DTFSuperstore 2 ай бұрын

Hi, What are your white underbase settings? Thanks for watching!

@user-zq1fg8ui7s 3 ай бұрын

Do you dry your prints before putting the powder on or do you just powder without drying out under the heat press?

@DTFSuperstore 2 ай бұрын

Thanks for asking. You do not need to dry your prints before powdering. Print, powder, dry (cure), and press!

@mikekiske 8 ай бұрын

Hi, there. When you say to powder, you mean before or after apply heat to the film? Thanks.

@DTFSuperstore 8 ай бұрын

Yes, the adhesive powder is applied before you cure the transfer.

@mikekiske 8 ай бұрын

@@DTFSuperstore Thank you. 🙂

@LanceMcGrew 2 ай бұрын

Wonder if this window of time also applies to sublimation ink?

@DTFSuperstore 2 ай бұрын

It might! Thanks for watching. We just aquired a screen print and sublimation supplier and now are carying their consumables at our Gilbert location and on our website. We will be incoorperating more videos on these apparel methods in the future.

@user-pp5ym6ne9y 6 ай бұрын

Does it go in the heater after powder

@DTFSuperstore 6 ай бұрын

Yes! Once your graphic is powdered you'll want to cure it!

@marthadowling9934 3 ай бұрын

After powdering how long can you wait to heat transfer it?

@DTFSuperstore 2 ай бұрын

@marthadowling9934 We recommend 90 seconds, the same interval.

@elhavanna6714 10 ай бұрын

We are powdering our sheets after 10 - 15 Seconds. if not the powder will not hold on small details, btw u only repressed the 0 - 60 seconds one why not did it in the middle of the press to check if its not he press?

@DTFSuperstore 10 ай бұрын

We did not film all of the represses. Edited those out for time. Yes smaller details like halftone dots and fine lines do dry faster but if your humidity and temp are in the proper range 70-75 F and 40-60% humidity those fine details should still pick up the powder.

@pixelbat 3 ай бұрын

How does hand powdering compare to machine powdering tho? About the same?

@DTFSuperstore 2 ай бұрын

Thanks for asking. Yes, the result itself will be the same.

@christopherbohatyritz5135 6 ай бұрын

Do you bake the powdered image before printing?

@DTFSuperstore 6 ай бұрын

The correct order is Print then Powder then Cure then press.

@amarantsfam.8713 5 ай бұрын

Is it important to press it right after you cure it?

@lynnwilliamson3 6 ай бұрын

Did you use Black powder on dtf film

@DTFSuperstore 5 ай бұрын

no, we only use white powder

@DinukaLakmal-li5px 9 ай бұрын

Hello sir...why DTF powder spread over the design..I mean powder goes around the design.please support me

@DTFSuperstore 8 ай бұрын

The powder should only stick to the printed areas. If powder is sticking to the unprinted areas of the film you may have bad film or a static electricity issue.

@shawnb3951 8 ай бұрын

I have the same thing happening with Yamation dtf roll and their white powder but haven't notice any issues with the blank powder spots after pressing. Atleast not yet🤞🤞