How Much Does a Rear Mount Turbo Setup Cost?

Рет қаралды 7,481

3 жыл бұрын

I go over every part i had to purchase for my rear mount turbo setup and how i was able to do it for pretty cheap, you save yourself plenty of money buy installing yourself and knowing whats okay to be cheap on. The rear mount is a little cheaper and easier since you dont have to make custom manifolds and have to deal with piping in the engine bay.
follow me on ig: dgwhip

Пікірлер: 47

@pdanny3 8 күн бұрын

This is perfect 👌 just reconfirming my thoughts on this for my q50 3.7. Like everyone else, i say this video is top notch bro. Loved it 🙏

@buttersmooth6515 3 жыл бұрын

Yeah you're hella underrated bro this is quality content my boy good luck with your projects keep the vids coming

@DGWhipZ 3 жыл бұрын

I appreciate that a lot man thank you! 🙏🏽🙌🏽

@robremini333 8 ай бұрын

Love the design, simple and effective. I literally came upp with the same idea for using the wastegate and vband adapters for my g37.

@MagggzzTheOne 3 жыл бұрын

Really needed this video !! Sick content bruh 🙏🤙

@DGWhipZ 3 жыл бұрын

Appreciate it bro!

@Agentsmith2099 3 жыл бұрын

Man young bro ....lookin back at everything now you've come a long way! Matured and knowledgeable! Keep it going droppin that knowledge and inspiring future G owners👌👌💯💯

@DGWhipZ 3 жыл бұрын

Haha appreciate it man! Only direction to go is ⬆️

@Agentsmith2099 3 жыл бұрын

@@DGWhipZ Yessir 👌👌🤜🤛💯💯

@jaybird4756 2 жыл бұрын

I've got roughly 5k into my rear mount on my ws6

@5erotonin 3 жыл бұрын

Thanks for the update my guy

@DGWhipZ 3 жыл бұрын

Glad I could help 🙏🏽

@yemiyesufu5745 2 жыл бұрын

How does the car do in the rain or do you drive it when it rains at all?

@30YearOldBunta Жыл бұрын

What does the stock MAF tap out at? my car (02 Q45) has a maf and a map sensor so I'm wondering what fueling would be like at 4-5psi 🤔🤔

@masihart1705 2 жыл бұрын

Is this on a stock motor ? I have a Revup 05 G35 coupe. And should i do the gaskets first

@John-rw9bv 2 жыл бұрын

Great video man, really great! I have a question about the oil/cooling - instead of pumping the oil all the way back and forward again, could you have your rear-mount oil pump/reservoir/radiator?

@kylehart5440 Жыл бұрын

I had that same thought. You could definitely do something similar to a dry sump in the trunk.

@zeromaz6618 2 жыл бұрын

what exhaust shop are you talking about? this is in vegas, right?

@rashidahmedrajah6392 6 ай бұрын

Did u lower Compression Ratio....? What is it at the moment...?

@waynegray6453 3 жыл бұрын

Great video thanks 🇳🇿

@DGWhipZ 3 жыл бұрын

Appreciate it man glad you enjoyed it 🙏🏽

@Skeeter_Dee Жыл бұрын

tight af

@DennyBalance 3 жыл бұрын

Yessir

@BronzeBuckosBounties 3 жыл бұрын

The sounds

@DGWhipZ 3 жыл бұрын

Nut

@caest9989 3 жыл бұрын

how can I fix the triptonic +/- mode on my G35 ? sometimes it works sometimes it don't. most of the time It doesn't

@aloe9441 3 жыл бұрын

For real though^

@DGWhipZ 3 жыл бұрын

This is a very common problem, the easiest solution is to just swap your shifter assembly with a used one that works, my g is an 06 and I’ve had no issues with this but I think particularly on 05s this is a big issue although it happens on all years. You can get yourself a used assembly for like 50 bucks on eBay and swap it out and you’ll be good to go

@WarriorOfEden3033 Жыл бұрын

STS is like $2500 but need a 4.0L engine & up

@WarriorOfEden3033 Жыл бұрын

I need a 340LPH to run a STS kit 😭

@martincuevas9193 2 жыл бұрын

You think I can do this on a escalade?

@DGWhipZ 2 жыл бұрын

Of course

@Pleksilasi Жыл бұрын

dude, I have some feedback : first of all I hate your beard, it's just like mine and its hideous xD your car is cool and your rear mount turbo-thingy rocks hard AF thanks for your content!

@jakefinn9785 2 жыл бұрын

Did you tap into the oil pan?

@DGWhipZ 2 жыл бұрын

For my oil drain yes, the upper oil pan I drilled and used a no weld 10 an bung since any space on the lower pan was too low and draining too low into the pan caused backing up issues

@jakefinn9785 2 жыл бұрын

Would you recommend using a sandwich plate?

@DGWhipZ 2 жыл бұрын

@@jakefinn9785 for your oil feed yes, I use the g plus sand which plate, you get really good oil pressure to the turbo from there, drain back high in the pan as you can

@jakefinn9785 2 жыл бұрын

Okay sweet I’m thinking about boosting my mk3 Supra cause I put the 3uz in it and I don’t have room for a turbo up top so I wanted to do a rear mount just didn’t know where to start you honestly helped me out a lot man

@DGWhipZ 2 жыл бұрын

@@jakefinn9785 glad I could help bro, feel free to dm me on Insta if you got any other questions as well, good luck with the build 👍

@slowguy4046 2 жыл бұрын

Hey bro can you send a list on all the parts on ig ?

@DGWhipZ 2 жыл бұрын

Yea bro I gochtu

@DGWhipZ 2 жыл бұрын

What’s your ig?

@lincolnXD 5 ай бұрын

@@DGWhipZ I know this is 2 years old but do you still got that list I’m trying to do this on a budget

@trystanmorales6819 2 жыл бұрын

Wow this is not a bad price at all dude. Jesus

@DGWhipZ 2 жыл бұрын

Some people have done it cheaper too, there were just some things that I personally required on my build and things I wanted to spend extra for, I believe Denny balance did his for 12 or 1300 before the tune