HOW MUCH DOES IT COST TO BUILD A 800HP+ CAPABLE BMW ENGINE?

Рет қаралды 25,544

2 жыл бұрын

Пікірлер: 88

@AJFLACO 2 жыл бұрын

I've been following this build for a little bit now. I've got an e46 wagon that I put a lot of work into, Rebuilt m54b30 every maintenance item, chassis reinforcement, poly bushings every single alignment item you could thing of etc etc. next is turbocharging and I have a spare m52b28 that I planned to build over time to be my high horsepower motor later on. Your build is helpful to know what I can do with the m52 iron block when I do come around to putting that motor in. Keep going man and I love this series!

@hellrotgarage 2 жыл бұрын

Thanks man!

@adventureswithsteph5352 Жыл бұрын

Hell yeah man you keep coming with the great content, we’ll keep watching!

@zackebree Жыл бұрын

You deserve a few more 0’s to that subscriber number. Always appreciate your videos. Keep killing it brother 👊🏽💯

@agdwhite5421 2 жыл бұрын

I have a list that i would like to buy anyday, with cx Racing kit turbo, reinforced clutch kit, fuel pump, injectors, tune, decompression plate, arp studs, etc etc, basically all you need, 5200€ all done by myself except the tune, my engine is a m52tub28 (around 6000$) you made it really cheap!! Congrats, your car is amazing

@tristanharpur5485 Жыл бұрын

Where did you get the forged rods and Pistons? Looking a set for my M54B30 build.

@tanejensen5932 8 ай бұрын

I’ve got a e46 328i sedan I’m wanting to turbo/manual swap this vid is awesome thanks bro!

@mihaiparghie1397 Жыл бұрын

Hi. How did you relocate icv for this intake manifold ?

@cristiansoto8284 2 жыл бұрын

What setting do you have for safety how much power ?

@ehabalrmili8848 3 ай бұрын

Hello, is it possible to start the engine with a front sensor crank?

@tweedjohnny8740 Жыл бұрын

I just found your channel today and I subscribed. I'm loving the content. I have a crazy favor to ask, could you please do a vion installation of auto meter electrical oil Guage. There is not 1 video on this subject except for a few idiots that couldn't teach a monkey to eat a banana! Anything you could do to help would be greatly appreciated.

@momo_drives Жыл бұрын

Whats needed inside the engine if I'm looking for 450whp? I know stock can go 400 reliably but I like to overkill things a little to make sure reliability is always there. Planning to match the turbo setup you have going in your current build series! I have a 330ci

@tonystark3655 Жыл бұрын

450whp should be fine just make sure to run E85 with a flex fuel kit

@zigzach8330 2 жыл бұрын

Really stoked about those H-bean rods. I’ve got a few cans in the pantry

@hellrotgarage 2 жыл бұрын

😂😂

@kadenbourgeois1 Жыл бұрын

How much with turbo?

@Tangledbawlz 2 жыл бұрын

Thank you for the information!!! I want to do this to my E46 too, but having it be reliable.

@hellrotgarage 2 жыл бұрын

No problem!

@kylep3759 Жыл бұрын

The e46 will never be reliable. Not even stock. Well maybe it’ll be reliable for 1 year after all proper maintenance is done at one time and all the plastic in the cooling system is replaced to aluminum parts that cost 3x as much. Then you get a fucking oil pan leak, and then you have to change all the gaskets AGAIN and then your fuel pump goes and your power seats don’t work AGAIN and then your rear struts give out because they are shit, so you spend $1800 on a cool coilover setup because you think your hot shit and those only last 2 fucking years, then the headliner tears away and the center console flops over to shit and then you die.

@zbene95 2 жыл бұрын

Nice video man 👍

@hellrotgarage 2 жыл бұрын

Thanks a lot!

@ricky_ricardo Жыл бұрын

Thanks for the video fellow e46 clapper

@danielrodriguez9552 2 жыл бұрын

Hp, and torque ?

@archivedpump2744 2 жыл бұрын

you should make a video of the car gettin dynoed

@jamesacottdavies5826 2 жыл бұрын

Very tempted to do this to my e60

@garratteguyton9479 10 ай бұрын

Needed some inspiration! I went with diamond 9.5 84.5, fcp x-beams in my 2.8, s52 cams, and doing a non vanos head converted to single vanos

@donovan4009 Жыл бұрын

Very helpful! Can a m54b30 block handle 600 + whp or up to 25 psi of boost with forged internals, upgraded head gasket, head bolts, oil pump etc? Can the aluminium block take it? The goal is up to 25 psi of boost on 93 octane with low compression ratio, about 9:1. I’m building on an e60 Do you think this setup would hold up? Thnx

@NatoriousGamePlay Жыл бұрын

Yes. There's this guy with an e39 making over 600whp on a stock block with a stock bottom end.

@wawiairsoft 2 жыл бұрын

Good stuff, very informative.

@hellrotgarage 2 жыл бұрын

Thanks!

@lilbreezi1243 Жыл бұрын

What specifically do you recommend to make around 400hp reliably because I’m not trying to go overboard because it’s a daily mines only at 90,000 miles

@southernracing2468 10 ай бұрын

Just a good turbo set up and good fuel system valve springs cams and intake will help a lot too

@benboe9325 Жыл бұрын

Is m50b30 needed for 700hp -800hp or is possible with m54b30 ? Internals changed (M12 bolds , wiseco 9:1 pistons ARP rods, gt35 turbo , straight pipe...)

@hellrotgarage Жыл бұрын

M54b30 just sucks because its hard to keep the head from lifting due to the weak aluminum block

@archivedpump2744 2 жыл бұрын

Is a 2.5l i6 worth building cause ive only seen people messing around with the 3 i6

@hellrotgarage 2 жыл бұрын

Yes a 2.5 is great

@_mrklein 2 жыл бұрын

we need a pov of this monster!

@hellrotgarage 2 жыл бұрын

There are a few on the channel already! I have one reel of 25psi, and some videos on over 15psi. Once I go back to e85 ill turn it up!

@cesarxmbert Жыл бұрын

what ECU are you running? sick build.

@hellrotgarage Жыл бұрын

Stock ms43

@kinggjaye8122 Жыл бұрын

Subbed

@Vgk36 2 жыл бұрын

Damn 5k plus turbo setup . As much as I would love to stay Bmw. A ls3 Chevy performance crate engine (19432557 pn#) from jegs is 6k shipped BRAND NEW. Then the other tidbits and go slay. I really do love the turbo setup you have but more than anything I want to have ease of maintenance be my main driving point. Not max power . 450 to 500 is this chassis is plenty to party .

@hellrotgarage 2 жыл бұрын

Oh come on, be irresponsible and stick with the bmw way!

@Vgk36 2 жыл бұрын

@@hellrotgarage brother if I was in a better position financially I would. Tbh when the time comes I may just rering and boost the m54b30 that’s in the car for the flutter noises and leave it at like 350whp. I really need to keep ac. If it pops then I’ll sell the turbo setup and go LS … as gross as that sounds .

@danielplumley379 2 жыл бұрын

ls3 doesn't make 800hp though...

@A3jettaftw1 2 жыл бұрын

The “other tidbits” for that swap will add another 5k real quick just to not even make half the hp

@Vgk36 2 жыл бұрын

@@A3jettaftw1 you know ls3’s make 495hp STOCK right ….

@Renhumble 2 жыл бұрын

Nice build! Total cost of 5k not even that bad considering the power, even if it was like 500hp that’d still be good. I was looking at the k64 kit for my b30, should I get their kit (cost like 4-5k, clutch everything included & stage 2) or seek each part out individually?

@hellrotgarage 2 жыл бұрын

Thats a good deal actually. Try it!

@jaxhayes1557 2 жыл бұрын

Keep it up

@hellrotgarage 2 жыл бұрын

Yessir

@supdougs4487 Жыл бұрын

MR. BEAST!!!

@David0617-u4c Ай бұрын

I have m54b30 engine I want to install turbo to that engine, are safe for daily or not?

@hellrotgarage 13 күн бұрын

Yes you can daily if you control yourself and keep it at 10psi

@carterstith9783 2 жыл бұрын

Should I build my 3 liter b30…?

@cesarxmbert Жыл бұрын

a 3 liter engine? just get the crankshaft if you want a 3L displacement.

@chadschmitt9798 2 жыл бұрын

What are the wheels?

@hellrotgarage 2 жыл бұрын

M pars from bmw

@plugpenguin1660 2 жыл бұрын

can you make reliable 500-600 with m54b30 block? or is a iron block needed?

@hellrotgarage 2 жыл бұрын

Well if you want it to be reliable I’d recommend building the m54 up. You can make a reliable 400 on an un opened m54 if you go e85.

@ThomasBilt 5 ай бұрын

Shit an s54 is 5k so thats awesome plus you built it and know exactly whats what

@A3jettaftw1 2 жыл бұрын

Helll yeah!!! Dyno vid soon?

@hellrotgarage 2 жыл бұрын

I really hope so. Lot going on

@bapesta215 2 жыл бұрын

I want my e46 sedan to stay awd but I want them HP's is it possible??

@tonystark3655 2 жыл бұрын

Yeah it’s possible there’s a couple e46 xi making 800whp with stock awd drive train

@LochyP 2 жыл бұрын

@@tonystark3655 I call bs, the awd drive train is made of chocolate... do you have any links?

@tonystark3655 2 жыл бұрын

@@LochyP kzfaq.info/get/bejne/l7B2mrCH29OwfJ8.html kzfaq.info/get/bejne/qKyZnrhkmJeUlXk.html the first one is making well over 800whp and the second one around 700whp

@drewdavis239 2 жыл бұрын

What size pistons ? 84 over bore .5 ?

@hellrotgarage 2 жыл бұрын

Yes .5 over stock

@drewdavis239 2 жыл бұрын

Solid lifters? Your not that far from alien engineering/ someguy325. Go get his solid lifters. Spin it to 8500. Job done! Check out his KZfaq channel. He's a regular contributing factor on the forums.

@drewdavis239 2 жыл бұрын

kzfaq.info/get/bejne/bpqPjZpqmpaukpc.html

@drewdavis239 2 жыл бұрын

I also wonder how much lower your compression is with the bigger rings in the head gasket.