Location, plays a huge factor in price. A running and driving Mustang coupe for under 5 grand is cheap.

Nice project. Must be a lot more fun for you to work on your own ride. You get to make all the calls and if "good enough" is good enough, no one is going to demand you do it differently. I'm really looking forward to following the build.

$3,200 is astonishing in this inflated market. Everyone else wants five figures for rusted out shells that are about as strong as three day old crackers that have completed their transformation from steel to completely made of rust and bondo with no floor left.

Great video. Good information

Pretty cool. My first car was a 1966 forest green mustang (289 motor) just like this. My Dad originally bought it new off the lot in 1965/66 and told me the MSRP he paid was $3250. After having the car in our family for I guess about 30 years, he sold it for exactly what he paid for it new: $3250. I think he got a kick out of having had a car for 30 years and then breaking even. He had a funny saying, when people would ask him how he liked his Mustang: "Oh, it's a great car, but I've had to replace everything on it 3 times" haha :-) Good luck with your project over there! Fun times.

3000 bucks?? That’s a steal!!

Exactly! I bought my 69 coupe from Texas for 3500$. With bad tires and brakes but minimal rust 👍

Hey Mr Peterson big fan of what you do .i picked up my 65 mustang for 3 grand as well but you beat me with the extra parts you got that's awesome . Mines about the same in rust only on the floor and didn't have front or back windshields but the pony interior is still in great condition got the glass off offer up for 300 im hoping to keep my budget at 5 grand in total me doing all the work . Just keep doing the videos like the content stay up sir .👍

Awesome. I look forward to the videos to come. I've dreamed of picking up my 66 coup project for years while raising a family. I've owned it since college and drove it for years as a budget car and had to put it in mothballs when the family came around. Now the family is grown and out, so I can make way for the restomod project. During the years I've prepared for this by putting my project down on paper, so I'm pretty realistic with where I want to go with it.

What a steal of a price!

Enjoyed your take on the range to stay in when shopping and things to look for

Looks like car has manual steering. Great road feel when moving. Most people today would not like to steer it when parking or starting out. Need to mention to check cowling. A major rust place and difficult/expensive to fix. I spent $4500 on a 66 coupe T code. Six cylinder suspension with a 289/4spd 15 years ago. Had to replace floor pan from Toe boards to rear seat riser. Most of us novices need to be careful as alot of replacement parts are chinese junk

There’s no doubt that you’re at least the best in the business putting these mustangs together man especially as bad as you’ll take one on! I It’s really good of you to share your knowledge and experience with us and help us fix our cars you really make good videos well spoken very well presented man thank you

Love the new direction you are taking. Can see the excitement in your eyes. All the best, Ben!! Been with you from day 1.Glenn in AZ. I have always want to do, own a mustang. But 65,will enjoy the experience through you. lol 😊

First video I've seen of yours. Great information, thanks for sharing. Definitely worth subscribing to.

Valid point for a build video.... tips on what to build, what the end product a person is expecting V/S what they can afford. Now I personally love it when you save a car that would normally DOOMED... I have in my time seen too many get crushed... and they should not have been... desirable cars that are gone now ... Mostly because the person could not afford to fix it . The mustang is a fantastic car for a DIY guy with some good knowledgeable and a minimal amount of skill . Most of the time is good planning and patients , not get into a hurry, I have seen cars get bought up after a lot of the Hard work was done... Keep up the great work .

Thanks for the info

Looks like a great build-to-drive project! You have now inspired me to do the same plan for my daughters car

In Australia you would pay $3000 for a picture.

Thanks for sharing all of “as is” condition details. Especially the price.. Awesome 👏 to have gotten the brake kit and some other parts.. I have a 65 driver coupe myself… It great fun, to drive it and park just about anywhere, and walk away.. Looking forward to the next installments..God bless..

Can't wait to see it!

Yup, if frame rails and shock towers are in good shape, other issues are pretty easily negotiable.

That's not a smoking deal for the coupe, that's the closest thing to getting a gift there is. That is a solid car with good bones, I'd buy every single one I could find in that nice of a shape.

Nice car, sir. It’ll be a great ride no doubt. Keeping it stock is a good move. That’s me speaking in hind sight. I have a 68 coupe restomod. 347, Mustang 2 front end, 8.8 dif and the list goes on. I redid a 76 F150 4x4 Ranger trim, factory air, 360, 4 speed manual. Bone stock. Great starting, so smooth running and dead reliable. Guess which one I drive. I have to say now when I hear big cammed loud muscle cars I’m over it. Keep up the good work! Love your channel

Good info, thanks

G'day from Australia! I am in the process of restoring my 65 coupe aswell. Mine has rust in the doors (exact same spot as yours) and in the trunk. Going for a 'cheap' build aswell! Enjoying your videos mate. Keep it up.

Thanks for the video! Good to know I am not off on what I think cars are worth, to me $3200 is the perfect price but most I see that are worse are $10k-$15k firm, really crazy but they are coming down since the market is kind of flooded. I am dying, $2k for a 69 fastback.

This was great ! Thank you !!!!!!!!!!!!!!!!!!!!!!!

NNKH got me on to your channel! Nice and Tight! Great Viewing!

This will be great! Would luve a daily coupe

I have a 66 with 6 cylinder front suspension, looking forward to your build , and you maybe telling us all we need to change over to v8 suspension

You'll sell before it's completed. I've heard (I'm going to keep this one) since you were 15 yrs old son, do you remember your first mustang - 93 fox body conv. Sold it to Bill Miller from carlisle collector cars.

Nice find

Dddaaannngg 15k for a rusted out fastback Mustang. I’d rather save up an other couple thousand, and get a Dynacorn freshly built. Yeah it’s not going to have the history behind it, but you’ll have a brand new body to work with. Which is something I might do in the future with my family. As of right now, I got my 65 Mustang to work on. It’s already drivable but I want some more racing performance.

You have a great channel, I have a 66 fastback that I'm doing , alot of work but I love it, got it for 3,000 Haven't done much to it lately, but have some great plans for it. Again a great place to watch. I'm having a little problem with the doors fitting right, but I think you did a show on them

That’s hard to believe you only paid that for the car. I’ve seen a rusted out chassis with now drive train in my area listed for 6k

I have a 67 Fastback with clear title, with lots of parts, Wimbledon white with red interior. Owned for 30 years no drivetrain, lots of parts and a clean car, repaired as needed. Any interest send me a message, in KY. This was a California car until my ownership.

Just curious where’s your location? I’m currently buried in a 69 Fastback my dad left me. It’s at a shop in line for basically for final assembly. Body’s done and I have just about everything on hand ready to go down to the motor being rebuilt (dad had it done in the early 2000s). Sorta getting tired of waiting and it’s not a money issue. I’m in SoCal so if your somewhere out of state never mind, but it’s been sitting for over a year now as I just had a hell of a time finding anyone local to do it at all and my situation wasn’t setup for doing it myself. Would love to have it done by next summer. Well love the videos as I was raised on pony cars and my first daily was a 65 289 coupe with a four speed. Sold it after the army for reasons but I’m glad I’ve got something so sentimental in the works.

Know your level of expertise. Don’t get in over your head. Know how much parts are going to cost. Take your time and have fun

$3200 is more than when it was new :). I bought a 69 Firebird new for $3926.

well bought for $3200. patch and go it will be a fun driver you don't have to really worry about. a 3 speed with good brakes, 289/302 with a 4 barrel and some cam so it actually pulls then a couple things on the front suspension to help it handle. great driver, you can call it a beater but that doesn't matter.

Smokin deal. I would love to find something like that…

Great project and plan but my OCD screams fix all the rust lol...

I'm Considering a gen 1 coupe. You'd think they're inexpensive and parts would be plentiful... would love a fastback but those seem so much more expensive and I'm not looking for something terribly collectible. Just want a cool driver...

You got skills brother! I like your low key demeanor coupled with the amazing work you do. I am looking forward to this daily driver mustang you have going. Do you have A/C plans?

I'm checking out a 66 coupe soon. Guy is asking for $10k. Only difference is that it's in pretty good condition. Only has 40k miles on it and everything works. It just has rust on the roof and is in need of a new paint job

Good deal!

In Australia that coupe would be 20k

Good to see you back again so soon. What ever happened to the Shelby clone?

Should be a cool daily and fun series. What would you used to neutralize that rust? I’ve used OSPHO with good results, but I’m sure there are several others.

Got my 66 coupe-inline 6/3 speed. California car very little rust. Now has 302 / C4 paid $6200.00

I have had my 67 hardtop since 93. I think it needs more work done on it. I was thinking on doing the cowls. I think it is time! I have done some welding in the past, but not really sure to take that on.

I have a 66 289 runs and drives but needs suspension rebuild I will be watching and you gained a new subscriber

Have you used the total control front coil over suspension on any of your cars?If so can you give me some feedback as fare as handling and ride quality go.Cheers

So , 3k for the car and a budget of 7k and your doing the work on the car . I'm guessing 22k for a coupe that is ready to go ?

$2k in that Mach 1 man I paid $4.3k for mine in worse condition. So jealous and mine was just a base Mach 1 351w 2v roller shell.

How long does it take to put fastback quarter panels on a coupe body?

Could you offer some guidance with parts I need I’m trying to fine the nose grill piece and I’m having no luck the car I got has none of that.

I have a 68 coupe restored 22 years ago I'm looking for a fastback do you take trad in

Fix the rust in the body panels

Thanks for the information, I’m following this build to the end.🤮

I have a 65 coupe I want to convert to fastback. Interested?

So how long would it take to fully restore a 69 like that ?

Re - Do my 1972 Ranchero GT 4 speed !

With such a big price difference between coupe and fast back, would'nt it be a good idea to transform a coupe into a fast back or is it too much work to make it worthwhile?

Do you get titles with your shells or do you apply for them?

what are you doing for the front suspension

I hope he tracks his hours and additional parts and money he puts into this.

Should there be 289 badges on the front fenders?

If I took my mustang fb rust free car to you to restore not including the motor or transmission approx how much would it cost me

And do all your cars come with titles if not how do you go by getting them

When are you planning to finish it?

is the cowl rusty?

Change to 3:50 ratio?

I wouldn’t do all that body work either , those models not worth crap for dollar value

Gone Again???

How can I contact you by email